- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Glass Filled, Molded
- Guarniflon PTFE G418 Polytetrafluoroethylene 15% Glass Fiber, 5% Molybdenum Disulfide
Guarniflon PTFE G418 Polytetrafluoroethylene 15% Glass Fiber, 5% Molybdenum Disulfide
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Glass Filled, Molded |
| Manufacturer | Guarniflon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Guarniflon PTFE G418 Polytetrafluoroethylene 15% Glass Fiber, 5% Molybdenum Disulfide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PTFE G Special Compound with glass fiber and molybdenum disulphiteInformation provided by Guarniflon®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.20 - 2.30 g/cc | 0.0795 - 0.0831 lb/in³ | molded; ASTM D792 |
| Deformation | 3.0 - 4.0 % @Pressure 13.7 MPa, Time 86400 sec |
3.0 - 4.0 % @Pressure 1990 psi, Time 24.0 hour |
after 24hr relaxation; ASTM D621 |
| 7.0 - 8.0 % @Pressure 13.7 MPa, Time 86400 sec |
7.0 - 8.0 % @Pressure 1990 psi, Time 24.0 hour |
ASTM D621 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 55 - 60 | 55 - 60 | molded; ASTM D2240 |
| Tensile Strength | 15.0 - 20.0 MPa | 2180 - 2900 psi | molded; ASTM D4745 |
| Elongation at Break | 220 - 270 % | 220 - 270 % | molded; ASTM D4745 |
| Compressive Yield Strength | 8.50 - 9.00 MPa @Strain 1.00 % |
1230 - 1310 psi @Strain 1.00 % |
ASTM D695 |
| Coefficient of Friction, Dynamic | 0.080 | 0.080 | |
| K (wear) Factor | 10.0 - 20.0 x 10-8 mm³/N-M | 4.96 - 9.93 x 10-10 in³-min/ft-lb-hr | at PV 100; ASTM D3702 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 90.0 - 120 µm/m-°C | 50.0 - 66.7 µin/in-°F | ASTM D696 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | |
| Minimum Service Temperature, Air | -200 °C | -328 °F |
Users viewing this material also viewed the following:
- Premix Premi-Glas® 1200-25 Fiberglass Reinforced Thermoset SMC
- Solvay Specialty Polymers Amodel® AS-4133 HS Polyphthalamide (PPA) (Unverified Data**)
- Chevron Phillips Marlex® CL-200YNR JN (Natural) Rotational molding crosslinkable high density polyethylene (d
- TSE Industries Millathane® E34 Millable Polyether Polyurethane Rubber with Plasthall DOZ
- Kolon ELLAS K-787A Ester Based Thermoplastic Polyurethane
- Haynes Waspaloyâ„¢ alloy, sheet
- Wingate Alloys Winco NS Non-Skid Safety Material
- A. Schulman ComAlloy® E-14961 30% Glass Fiber Reinforced Polycarbonate
- Epoxy Technology EPO-TEK® H27D Electrically Conductive, Silver Epoxy
- Arlon AD430 Glass, PTFE and Micro-Dispersed Ceramic
Copyright © lookpolymers.com All Rights Reserved