- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Nordel® IP 4520 Molded Golf Grip
Dow Nordel® IP 4520 Molded Golf Grip
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Dow Chemical |
| Trade Name | Nordel® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Nordel® IP 4520 Molded Golf Grip.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
FormulationNordel® IP 4520
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.057 g/cc | 0.03819 lb/in³ | |
| Mooney Viscosity | 33 @Temperature 100 °C |
33 @Temperature 212 °F |
ML 1 + 4 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 58 | 58 | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tensile Strength, Ultimate | 13.5 MPa | 1960 psi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Elongation at Break | 685 % | 685 % | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 100% Modulus | 0.00160 GPa | 0.232 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 200% Modulus | 0.00270 GPa | 0.392 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 300% Modulus | 0.00380 GPa | 0.551 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tear Strength | 29.5 kN/m | 168 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Compression Set | 95 % @Temperature 125 °C |
95 % @Temperature 257 °F |
Pellets cured MDR TC95 + 15 min at 160°C, 70 hr at 125°C; Method B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -45.0 °C | -49.0 °F | Temperature Retraction, TR-10 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® PPC4701 PPC
- Lotte Chemical Titan TITANEX® LI5011 Linear low density polyethylene resin (discontinued **)
- Huntsman IROGRAN® A 85 P 4380 TPU-Polyether
- LG Chemical LGflex GL300 Plasticizer
- Materion Beryllium Copper Alloy 3 Wire; A (TB00) Temper; 1.3-12.7 mm Diameter (UNS C17510)
- Gouda Vuurvast AK 70 K Dense Refractory Brick
- Monmouth Rubber & Plastics Durafoamâ„¢ P391SHD EPDM
- ELASTO UK Dryflex® 500750S SEBS Based Material, Unfilled Qualities, 75A Hardness, Translucent
- DSM Stanyl® TE250F9 Nylon 46-45% Glass Reinforced (European and Asian Grade) (Dry)
- DuPont Bynel® 2174 Anhydride-Modified Ethylene Acrylate Adhesive Resin (discontinued **)
Copyright © lookpolymers.com All Rights Reserved