Songhan Plastic Technology Co.,Ltd.

3M Scotchkote™ 162HB Epoxy Coating

Category Polymer , Thermoset , Epoxy
Manufacturer 3M
Trade Name Scotchkote™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF 3M Scotchkote™ 162HB Epoxy Coating.pdf
  Online Service   lookpolymers   27660005
Material Notes:
3M Scotchkote Epoxy Coating 163HB has been specifically developed as a 100% solids lining for the internals of pipes, tanks, vessels and other equipment in contact with fresh water, sea water, raw water, and effluent. The product can also be used on externals of pipes where an abrasion-resistant system is required. This material is designed for application in a single high build coat of up to 1mm, by plural feed hot airless spray and can be used on both steel and concrete surfaces.Information provided by 3M
Physical Properties Metric English Comments
Density 1.57 g/cc
0.0567 lb/in³
Solids Content 100 %
100 %
Volatile Organic Compounds (VOC) Content 6.5 g/l
6.5 g/l
Water Absorption 0.72 %
0.72 %
21 days; ASTM D570
Water Vapor Transmission 1.20 g/m²/day
0.0773 g/100 in²/day
ASTM D1653
Oxygen Transmission Rate 0.947 cc/m²/day
0.0610 cc/100 in²/day
ASTM D3958
Thickness 508 microns
20.0 mil
Mechanical Properties Metric English Comments
Hardness, Shore D 82
ASTM D2240
Tensile Strength at Break 24.0 MPa
3480 psi
Elongation at Break 1.4 %
1.4 %
Flexural Strength 52.0 MPa
7540 psi
Impact Test 8.00 J
5.90 ft-lb
1/8" steel plate; ASTM G14 (modified)
Abrasion 105
[mg] CS-17, 1000 cycles; ASTM D4060
Thermal Properties Metric English Comments
Glass Transition Temp, Tg 26.0 °C
78.8 °F
56.0 °C
133 °F
Electrical Properties Metric English Comments
Dielectric Strength 15.7 kV/mm
400 kV/in
Processing Properties Metric English Comments
Cure Time 360 min
6.00 hour
Touch Dry
960 min
16.0 hour
Hard Dry
10100 min
168 hour
Full Cure
Descriptive Properties Value Comments
Appearance Gray and Red Oxide
Pencil Hardness 2H
ASTM D3363
Copyright © All Rights Reserved