Processing Properties | Metric | English | Comments |
---|---|---|---|
Pot Life | 30 - 40 min | 30 - 40 min | |
NextGen Adhesives P907-03 Fiber Optic Adhesive Description: NGAC P907-03 is a low viscosity and room temperature curing adhesive specifically formulated for fiber optic terminations.Advantages and Applications: Uses include the termination of si.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | Ambient |
Reltek BONDiT™ B-45 Adhesive, Sealant & Coating System Key Properties: Excellent adhesive for low surface energy plastics without primer.Used in potting, painting and protective coating applications.Excellent thermal and mechanical shock resistance.Ease.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | Ambient |
Reltek BONDiT™ B-45TH Adhesive, Sealant & Coating System Key Properties: Excellent adhesion to low surface energy plastics without primer.Bonding dissimilar materials.Chemical and shock resistance.Ease of use.Applications: Bonds difficult-to-bond substrat.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | Ambient |
Reltek BONDiT™ B-52 Adhesive, Sealant & Potting System Key Properties: Outstanding for bonding dissimilar materials with high thermal expansion differential applications.Fast thermal cure, long pot life.Ease of use.Applications: Excellent for fast assem.. |
|||
Pot Life | 20 - 40 min @Temperature 24.0 °C |
20 - 40 min @Temperature 75.2 °F |
54g mass |
Lord Adhesives 320 / 322 Epoxy Adhesive LORD® 320/322 adhesive is a general purpose, two component epoxy adhesive system formulated for primerless adhesion to automotive sheet molded compounds (SMC). This adhesive system also provides .. |
|||
Pot Life | 20 - 40 min | 20 - 40 min | Time before parts must be mated |
Lord Adhesives 660 White, Non Sag, Fast Set for FRP Acrylic Adhesive Lord Adhesives 660 White, Non Sag, Fast Set for FRP Acrylic AdhesiveLord 660 Acrylic Adhesive bonds FRP (fiber-reinforced plastics) with minimal surface preparation. Lord 660 can cross-bond FRP to m.. |
|||
Pot Life | 30 - 40 min @Temperature 25.0 °C |
30 - 40 min @Temperature 77.0 °F |
|
Lord Adhesives Thermosetâ„¢ SC-102 Unfilled Silicone Encapsulant Lord SC-102 is a "water-white" clear, two component, silicone encapsulating system. It has a very low viscosity and, when cured, a low Shore A hardness. Lord SC-102 is optically transparent with no .. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 50 grams mass |
Master Bond EP21TDCS Two Component Silver Conductive Epoxy Adhesive Master Bond Polymer System EP21TDCS is a two component, silver filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rapidl.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 50 gram mass |
Master Bond EP21TDCSMed Two Component, Silver Conductive USP Class VI Epoxy Master Bond Polymer System EP21TDCS MED is a two component, silver filled, electrically conductive adhesive/sealant that meets USP Class VI specifications for medical applications. The high strength.. |
|||
Pot Life | 25 - 40 min | 25 - 40 min | 100 gram batch |
Master Bond EP30HT-LO NASA Low Outgassing, Optically Clear Coating Description: Master Bond EP30HT-LO is a moderate viscosity, two component epoxy adhesive formulated to cure at room temperature or more rapidly at elevated temperatures, with a four to one mix ratio.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 100 gram batch |
Master Bond EP30HV Optically Clear, High Strength Two Part Epoxy Description: Master Bond EP30HV is a lower viscosity, two component epoxy system for high performance bonding, sealing, coating and potting. It is formulated to cure at room temperature or more rapi.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 100 gram mass |
Master Bond Supreme 11ANHT Fast Curing Epoxy Paste System Description: Master Bond Polymer System SUPREME 11ANHT is a two component epoxy resin system for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevat.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 50 gram mass |
Master Bond EP21TDCSLO Two Component Silver Conductive Epoxy Adhesive Master Bond Polymer System EP21TDCS-LO is a two component, silver filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rap.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 100 gram mass |
Master Bond EP30QF Quartz Filled, Two Component Epoxy System Master Bond Polymer System EP30QF is a quartz filled, two component epoxy for high performance bonding, sealing, coating and casting that is formulated to cure at room temperature or more rapidly at.. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | 100 gram mass |
Master Bond Supreme 11AO Electrically Isolating Adhesive and Sealant Description: Master Bond Polymer System SURPEME 11AO is a two component epoxy resin system for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevated.. |
|||
Pot Life | 30 - 40 min @Temperature 25.0 °C |
30 - 40 min @Temperature 77.0 °F |
100 g |
Abatron AboCast 8005-6/AboCure 8005-6 Epoxy AboCast 8005-6 is a tan, viscous filled liquid resin with a weight of approximately 11 lbs/gallon. AboCure 8005-6 is an amber, viscous liquid converter with a weight of approximately 10 lbs/gallon. .. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | Mass: 50g; TM R050-19 |
Resinlab® EP1056LV Black Urethane Modified Epoxy Casting Resin Resinlab™ EP1056LV Black is a two part urethane modified epoxy casting resin designed to give good adhesion to metals and PVC. It has good wetting to most surfaces and is free-flowing to penetrate .. |
|||
Pot Life | 30 - 40 min | 30 - 40 min | Mass: 50g; TM R050-19 |
Resinlab® EP11HTFS Gray Filled Epoxy Adhesive Resinlab™ EP11HTFS Gray is a two part filled epoxy adhesive designed for bonding metals and plastics. It cures at room temperature to a tough, semi-rigid material. It has good wetting to most surfa.. |