- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Yield = 75.0 MPa
Polymer Property : Tensile Strength, Yield = 75.0 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 75.0 - 85.0 MPa | 10900 - 12300 psi | Type 1B, 50mm/min; ISO 527-1/2:1993 |
| Nylacast Nylube Cast Nylon 6, Lubricated (Blended Solid and Liquid Lubricant) This supreme wear resistant grade contains a combined liquid/solid lubricant system, which allows for a coefficient of friction as low as 0.08. The material has outstanding Pressure-Velocity capabil.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527-1/2 |
| Radici Radilon® CST (dry) Copolyamide 6 semiaromatic Transparent gradeInformation provided by Radici group. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527-1/2 |
| Radici Radilon® S35HR (dry) Nylon 6 Medium high viscosityInformation provided by Radici group. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527-1/2 |
| Radici Radilon® SHS (dry) Nylon 6 General PurposeInformation provided by Radici group. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527 |
| SABIC Innovative Plastics LNP COLORCOMP R1000SU PA 66 LNP COLORCOMP* R1000SU is an unfilled Nylon 66 resin. Added features include: Heat Stabilized, UV Stabilized. |
|||
| Tensile Strength, Yield | 75.0 - 115 MPa | 10900 - 16700 psi | Average value: 97.9 MPa Grade Count:28 |
| Overview of materials for Polyetheretherketone, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polyetheretherketone, Unreinforced". Each property range of values reported is minimum and maximum value.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | |
| Hybrid Plastics PO6C81.01 Nanoreinforced® Polyphenylene Oxide (PPO) PPO available on the market today is typically mixed with polystyrene or other polymers to make it processable. However, these resins degrade the excellent mechanical and flammability properties of .. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527-1/-2 |
| Lanxess Durethan® B 40 FA 000000 Nylon 6, Film Grade PA 6, film grade of high viscosity, lubricated, not nucleated, in compliance with FDA for food contact and acc. the German BgVV Recommendation XLIV, Section VI.A" Synthetic casings in polyamide"Appl.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527-1/-2 |
| Lanxess Durethan® B 40 FKA 000000 Nylon 6, Film Grade PA 6 film grade of high viscosity, nucleated and lubricated, in compliance with FDA for food contactApplication Examples: flat and blown film, flat film coextrusion for PA/PE composite films |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 5 mm/min; ASTM D638 |
| SABIC Innovative Plastics Valox® 4012G PBT VALOX 4012G is a 10% glass fiber reinforced PBT injection molding resin with excellent mechanical properties. Applications: connectors. This grade is a 4012 with improved cycle time and ductility. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | 5 mm/min; ISO 527 |
| SABIC Innovative Plastics LNP THERMOCOMP PB006SXS PA 6 (Europe-Africa-Middle East) LNP* THERMOCOMP* PB006SXS is a compound based on PA 6 resin containing Glass Bead. Added features include: Heat Stabilized. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 50 mm/min; ASTM D638 |
| SABIC Innovative Plastics NORYL HH180 PPE+PS (Asia Pacific) Noryl* HH180 is a high heat, unfilled modified polyphenylene ether resin with a Vicat B/120 temperature of 185 deg C. Noryl HH180 is only available in color 80365. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 50 mm/min; ASTM D638 |
| SABIC Innovative Plastics NORYL N1150 PPE+PS Noryl* N1150 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated FR add.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527 |
| SABIC Innovative Plastics NORYL N300X PPE+PS PPE+PS blend. Unfilled. Non-brominated, non-chlorinated FR system. UL94 V0. High heat. Dielectric strength. Dimensional stability. Suitable for E/E applications. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 50 mm/min; ASTM D 638 |
| SABIC Innovative Plastics Noryl PX1404 PPE+PS PPE+PS blend. High Heat. FDA compliant with restrictions. Injection Molding and Extrusion.This data was supplied by SABIC-IP for the Americas region. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 50 mm/min; ASTM D638 |
| SABIC Innovative Plastics NORYL GFN1 PPE+HIPS (Asia Pacific) PPE+PS blend. 10% Glass reinforced. FDA compliance (restrictions apply). Low water absorption. Hydrolytic stability. Dimensional stability. Suitable for fluid engineering applications including wate.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527 |
| SABIC Innovative Plastics NORYL N1250 PPE+HIPS (Asia Pacific) Noryl* N1250 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flow , this resin also uses non-chlorinated, non-brominated FR ad.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527 |
| Polyram RamTal PMH2022 Polyacetal Homopolymer for Injection Molding General purpose polyacetal homopolymer for injection molding applications, MFI 22.Information provided by Polyram. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527 |
| Polyram RamLloy PFS302G14 ASA/PBT Alloy, 14% Glass Fiber 14% Glass fiber reinforced ASA/PBT alloy for injection molding applications.Information provided by Polyram. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-1,-2 |
| Covestro Makrolon® FR 7087 Polycarbonate Main characteristics:• High toughness• Good heat resistance• Glass-like transparency, optical quality• High dimensional accuracy and stabilityGrade characteristics:• Flame retardant• Med.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ASTM D638, ISO R527 |
| EPICHEM PA 66 Polyamide 66 |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO R 527 |
| Addiplast Addinyl B2 E Flame Retardant Nylon 6 Flame retardant, halogen freeInformation provided by Addiplast. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | 50 mm/min; ISO 527-2 |
| BASF Ultradur® S 4090 G2 10% Glass Filled PBT Description: Is a PBT + ASA, easy-flowing injection-molding grades with 10% glass fibers; for rigid, tough and dimensionally stable technical parts e. g. housings, consoles, contact carriers, covers.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | 50mm/min; ISO 527-2 |
| BASF Ultrason S 2010 PSU Ultrason S 2010 is an unreinforced, medium viscosity standard injection molding PSU grade. It flows readily and offers outstanding heat resistance and dimensional stability. It conforms to FDA req.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | dry; ISO 527 |
| Azoty Tarnow™ Tarnamid® T-29 MCS Polyamide 6 - Colored Colored medium-high viscosity grade for injection molding.Tarnamid® has the following main properties:High mechanical strength, rigidity and hardnessHigh impact strengthHigh vibration damping capac.. |
|||
| Tensile Strength, Yield | 75.0 MPa @Temperature 20.0 °C |
10900 psi @Temperature 68.0 °F |
|
| BASF Ultrason® P 3010 PPSU Unreinforced Polyphenylsulfone Description: Medium viscosity injection-molding and extrusion grade with good toughness and chemical resistance (stress crack resistance), resistant against superheated steam. The property profile m.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ASTM value at 50 mm/min. |
| BASF Capron® 8362 HS BK-102 Impact Modified, 34% Mineral-Filled Nylon 6 (Dry)
(discontinued **) Capron 8362 HS BK-102 is a pigmented black, 34% mineral reinforced, impact modified, heat stabilized nylon 6 injection molding compound exhibiting a high level toughness in combination with excellen.. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | ISO 527 |
| Eurotec® Tecomid® NB40 NL E PA6, unfilled, natural Information provided by Eurotec® |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | |
| Radici Radilon® S 38F (dry) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group. |
|||
| Tensile Strength, Yield | 75.0 MPa | 10900 psi | Type I, 50 mm/min; ASTM D638 |
| SABIC Innovative Plastics NORYL FE8000S PPE+PS Noryl* FE8000S resin is an unfilled modified polyphenylene ether resin designed for fluid handling applications. This resin is suitable for multiple conversion routes and will be available in custom.. |
|||
Copyright © lookpolymers.com All Rights Reserved