Polymer Property : Tensile Strength, Yield = 39.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® EX75 ABS Multi-purpose, extrusion ABS providing a favorable balance of engineering properties.
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® GX3800F ABS High impact ABS for sheet extrusion and blow molding applications. FDA food contact compliant.
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics Cycolac® MG34LGHF ABS Low gloss, high flow ABS for unpainted interior applications.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® EX58 ABS (Europe-Africa-Middle East) High impact ABS for sheet extrusion and blow molding applications.
Tensile Strength, Yield	39.0 - 62.0 MPa	5660 - 8990 psi	Average value: 49.7 MPa Grade Count:6
Overview of materials for Acetal Copolymer, Silicone Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Silicone Filled". Each property range of values reported is minimum and maximum values..
Tensile Strength, Yield	39.0 MPa	5660 psi	50 mm/min
Polimeri Europa SINKRAL B620 ABS, Impact Grade (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-04-25-20 High impact injection moulding grade. Its` excellent balance of mechanical properties (toughness -..
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Ineos H00M-01 Polypropylene Homopolymer (discontinued **) Suggested fabrication methods: Extrusion; ThermoformingFeatures: High melt strength, High stiffness, Medium-term heat agingComplies with FDA specification, Title 21, CFR 177.1520.Typical application..
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Flint Hills P4G4K-038 Homopolymer Polypropylene Homopolymer, UL certified, and FDA compliant.Features: Nucleated, antistat, and clarified.Applications: Injection molding: high clarity, housewares, and syringes, for EO sterilization.Former Huntsma..
Tensile Strength, Yield	39.0 MPa	5660 psi	Conditioned; ISO 527-1/-2
Lanxess DurethanÂ® DP BC 500 H2.0 901510 Nylon 6 PA 6, extrusion and blow molding grade, non-reinforced, elastomer-modified, high viscosity, good heat-ageing resistance
Tensile Strength, Yield	39.0 MPa	5660 psi
Ineos ABS TRIAXÂ® 1220 S ABS/Nylon Blend, Dry as Molded Extrusion and injection molding grade with good stress corrosion cracking resistance, good chemical resistance (fuel, cleaning agents), high impact and notched impact strength, good acoustical dampi..
Tensile Strength, Yield	39.0 MPa	5660 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCV065 PPE+Polyolefin Flexible, non-halogenated FR, PPE+Polyolefin resin designed for evaluation in Automotive ISO6722 Class A-C applications.
Tensile Strength, Yield	39.0 MPa	5660 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP LUBRICOMP KP004 Acetal LNP LUBRICOMP* KP004 is a compound based on Acetal Copolymer resin containing 20% PTFE/Silicone. Added feature of this material is: Wear Resistant.
Tensile Strength, Yield	39.0 MPa	5660 psi	50 mm/min; ISO 527
SABIC Innovative Plastics ValoxÂ® ENH3500 PBT (Asia Pacific) Unfilled PBT, Non-Brominated & Non-Chlorinated Flame Retardant
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP STAT-LOY A3000 ABS (Asia Pacific) LNP STAT-LOY A3000 is a compound based on Acrylonitrile butadiene Styrene resin containing Anti-Static. Added features of this material include: Antistatic. Also known as: STAT-LOY A
Tensile Strength, Yield	39.0 MPa	5660 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics LNP Thermocomp 5X06476 FP-V (PVDF) LNP* FP-VM-3830 is a compound based on Polyvinylidine Fluoride (PVDF) containing Mineral.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	39.0 MPa	5660 psi	50 mm/min; ISO 527
SABIC Innovative Plastics ValoxÂ® ENH3500 PBT (Europe-Africa-Middle East) Unfilled PBT, Non-Brominated & Non-Chlorinated Flame Retardant
Tensile Strength, Yield	39.0 MPa	5660 psi	ISO 527-2
Total PPH 4026 Polypropylene Homopolymer, Sheet Extrusion and Thermoforming This grade belongs to the Total Ecosolution line.Polypropylene PPH 4026 is a polypropylene homopolymer specifically developed to offer outstanding processability for sheet extrusion and thermoformin..
Tensile Strength, Yield	39.0 MPa	5660 psi	ISO 527
Unipetrol PP MONSTEN® MT 230 Polypropylene Homopolymer Applications include injection molding. Antistatic stabilization. Homopolymer.Information provided by Unipetrol RPA
Tensile Strength, Yield	39.0 MPa	5660 psi	parallel; ISO 527-3
Covestro Desmopan® W DP89043D Polyurethane PreprocessingMax. Water content
Tensile Strength, Yield	39.0 MPa	5660 psi	chs 2 in/min; ASTM D638
Diamond Polymers ABS 4012B Blow Molding Grade Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Entec Hypro™ PP-HP20NS Homopolymer, 20 Melt Flow, Nucleated, Anti-stat This product is intended for general purpose injection molding applications such as cutlery, caps and closures, and thin-wall containers.Information provided by Entec
Tensile Strength, Yield	39.0 MPa	5660 psi	ISO R527
Arkema Group Orgalloy® LE 60 HM Polyamide Alloy Polyamide Alloy, Film and PackagingInformation provided by Arkema Group
Tensile Strength, Yield	39.0 MPa	5660 psi	23°C, 50% RH; ASTM D638
Asahi Kasei Xyron® 200H Modified Polyphenylene Ether Heat ResistantInformation provided by Asahi Kasei
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Cheng Yu Plastic A700UV ABS-UV Resistance
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
Cheng Yu Plastic A779 Lubrication ABS
Tensile Strength, Yield	39.0 MPa	5660 psi	50 mm/min
Arkema Group Orgalloy® LE 60HM Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents).higher in rigidity than LE 6000. For film, hollow vessel blow moldi..
Tensile Strength, Yield	39.0 MPa @Strain 0.200 %, Temperature 816 °C	5660 psi @Strain 0.200 %, Temperature 1500 °F	0.059" Coil
AK Steel 15 Cr-Cb® ULTRA FORM® Ferritic Stainless steel AK Steel’s 15 Cr-Cb ULTRA FORM® is a low-carbon, low-nitrogen ferritic grade of stainless steel with an intermediate, 14.5% chromium content. Alloying additions of Ti, Cb, Si and Mn provide excell..
Tensile Strength, Yield	39.0 MPa	5660 psi	23°C, 50% RH; ASTM D638
Asahi Kasei Xyron® 100Z Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei
Tensile Strength, Yield	39.0 MPa	5660 psi	2 in per min; ASTM D638; Test specimens were injection molded by ASTM D1897.
Chevron Phillips K-Resin® BK13 Styrene-Butadiene Copolymer, Injection Molding Grade (discontinued **) Styrene-Butadiene CopolymerBK13 is an SBC developed specifically to have enhanced flow capabilities and improved stiffness over the KR01 grade. BK13 molded parts give excellent detail on rapid prod..
Tensile Strength, Yield	39.0 MPa	5660 psi	ASTM D638
BP Amoco Acclear® 6219 Homopolymer Polypropylene, High Clarity Grade (discontinued **) Suggested fabrication methods: Sheet extrusion; ThermoformingFeatures: High clarity, High heat resistance, Good melt strength/flow balanceTypical applications: Rigid packagingComplies with FDA speci..