Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Charpy Impact, Notched = 0.952 ft-lb/in² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
DIN 53453
Nilit FRIANYL A63 SG40 Nylon 6.6 for injection molding, 40% mineral filled
Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Charpy Impact, Notched 0.200 - 0.400 J/cm²
0.952 - 1.90 ft-lb/in²
Injection; ISO 179/1eA
Raschig Group DECAL® 1760 Phenolic
Glass-fiber reinforced phenolic molding compound. Very good electrical properties, good chemical resistance and mechanical properties. This product meets the allowed upper limits for heavy metals an..
Charpy Impact, Notched 0.200 - 0.400 J/cm²
0.952 - 1.90 ft-lb/in²
Compression; ISO 179/1eA
Raschig Group DECAL® 666/8 Phenolic
Glass-fiber reinforced phenolic molding compound with mineral fillers. High heat resistance, reduced mould shrinkage and post-shrinkage, good chemical resistance and mechanical properties. This prod..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO Data
Americas Styrenics Styron® 678C Polystyrene  (discontinued **)
STYRON® 678C general purpose polystyrene resin is a high flow, medium strength resin with good scuff resistance. It is typically used in thin-wall or consumer electronic applications. When used unm..
Charpy Impact, Notched 0.200 - 0.700 J/cm²
0.952 - 3.33 ft-lb/in²
Average value: 0.529 J/cm² Grade Count:12
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled". Specific grades with glass content betwe..
Charpy Impact, Notched 0.200 - 0.600 J/cm²

@Temperature -30.0 - -20.0 °C
0.952 - 2.86 ft-lb/in²

@Temperature -22.0 - -4.00 °F
Average value: 0.450 J/cm² Grade Count:6
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled". Specific grades with glass content betwe..
Charpy Impact, Notched 0.200 J/cm²

@Temperature 23.0 °C
0.952 ft-lb/in²

@Temperature 73.4 °F
ISO 179-1/2 eA
Hexion Bakelite™ PF 1107 Phenolic Formaldehyde Resin, Low Shrinkage, Resistant to High Temperatures  (disconti
Phenolic molding compound, inorganically filled, glass fiber reinforced, high heat resistance, low heat expansion coefficient, highest resistance to pressure, high dimensional stability.Application ..
Charpy Impact, Notched 0.200 - 2.50 J/cm²

@Temperature -30.0 - 30.0 °C
0.952 - 11.9 ft-lb/in²

@Temperature -22.0 - 86.0 °F
Average value: 0.832 J/cm² Grade Count:29
Overview of materials for Nylon 66/6, 30% Glass Fiber Reinforced
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66/6, 30% Glass Fiber Reinforced". Specific grades with glass content between 25% and 34% are incl..
Charpy Impact, Notched 0.200 - 1.20 J/cm²

@Temperature -40.0 - -20.0 °C
0.952 - 5.71 ft-lb/in²

@Temperature -40.0 - -4.00 °F
Average value: 0.566 J/cm² Grade Count:34
Overview of materials for Nylon 66, 10% Glass Fiber Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 10% Glass Fiber Filled". Specific grades with glass content between 5% and 14% are included. ..
Charpy Impact, Notched 0.200 - 1.60 J/cm²
0.952 - 7.61 ft-lb/in²
Average value: 0.569 J/cm² Grade Count:28
Overview of materials for Nylon 66, Glass/Mineral Filled
This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Glass/Mineral Filled". Each property range of values reported is minimum and maximum values of..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179
GEHR Plastics PET Polyethylene Terephthalate
Polyethylene terephthalate shows high tensile and mechanical strength, hardness and toughness, low friction and a high dimensional stability. PET may be used at temperatures ranging from -20°C to..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179-2:1999
Global EPP PET
PET is an unreinforced, semi-crystalline thermoplastic polyester, demonstrating dimensional stability similar to acetal, combined with the comparable wear resistance of nylon. Heavily loaded mechani..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179
Iran Petrochemical (PCC) I1 HA 7260 High Density Polyethylene
I1 (HA 7260) is a high density polyethylene with propylene as comonomer. It is very easy flowing, high density, hardness and stiffness, largely warpage free, for mass product articles in rapid shot ..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
LATI Later 4-V0HF1 PBT, Flame Retardant
Polybutylene Terephthalate (PBT) based compound. UL94 V-0 classified, halogens-based flame retardants and red phosphorous free. Availability: Africa & Middle East; Asia Pacific; Europe; Latin Americ..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
LATI Latistat 52/7-02 PP Homopolymer
Dissipative product based on Polypropylene homopolymer (PPh). Unfilled. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria T..
Charpy Impact, Notched 0.200 J/cm²

@Temperature 23.0 °C
0.952 ft-lb/in²

@Temperature 73.4 °F
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Ultem EXUM0169 PEI Blend (Europe-Africa-Middle East)
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.This data was supplied by SABIC-IP for the Europe-Afri..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
Edgew 80*10*4 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Valox® EH7020HF PBT+PET (Asia Pacific)
Valox EH7020HF is a mineral filled PBT/PET that offers good surface appearance, high flow and good heat performance. EH7020HF was developped for automotiove bezel application that require basecoat +..
Charpy Impact, Notched 0.200 J/cm²

@Temperature 23.0 °C
0.952 ft-lb/in²

@Temperature 73.4 °F
V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA
SABIC Innovative Plastics Noryl PX0346 PPE+PS
This data was supplied by SABIC-IP for the Americas region.
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ASTM D256
Plenco 4548 Phenolic, Granular, Transfer Molded
PLENCO 04548 is a heat resistant mineral filled phenolic molding compound, offering fast cure rates and hot rigidity. Type ASTM 5948 CFG, and UL recognized under component file E40654. 04548 is avai..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179-1
Unitika CX-2500 PA6, Conditioned
Transparent nylonInformation provided by Unitika Ltd.
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
dry; ISO 179
Ter Hell Plastic K-Resin KRE 9902 Butadiene-Styrene Copolymer
Description: Butadiene-Styrene Copolymer Compound, good transparency with impact strength and stiffness well-balanced.Application: For all kinds of injection molded parts.Information provided by T..
Charpy Impact, Notched 0.200 J/cm²

@Temperature 30.0 °C
0.952 ft-lb/in²

@Temperature 86.0 °F
conditioned; ISO 179/1eU
EMS-Grivory Grivory® GTR 45 PA6I/6T
Product description: Grivory GTR 45 is a transparent engineering thermoplastic based on amorphous, partially aromatic copolyamide for injection molding. Compared to other semi crystalline polyamides..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179
Chi Mei Kibisan® PN-106 L150 SAN
High Clarity
Charpy Impact, Notched 0.200 J/cm²

@Temperature -30.0 °C
0.952 ft-lb/in²

@Temperature -22.0 °F
50%RH; ISO 179/1eA
DuPont Performance Polymers Minlon® 10B140 NC010 Nylon 66  (Unverified Data**)
40% Mineral Reinforced Polyamide 66Minlon 10B140 NC010 is a 40% mineral reinforced polyamide 66 for injection molding. It has very low warpage.Information provided by DuPont Performance Polymers
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO Data, Low Temp
Dow Tyril® 880B SAN
TYRIL® 880B SAN copolymer combines the high levels of chemical resistance, heat resistance and overall strength of 880 resin with improved mold flow and mold release characteristics.Data provided b..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
80*10*4mm, Cut; ISO 179/1eA
SABIC Innovative Plastics SABIC PPCOMPOUND 15T1040 PP
SABIC® PPcompound 15T1040 is a general purpose, talc filled, heat stabilized homopolymer polypropylene compound, suitable for injection molding applications. The IMDS ID is 16487994
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
Arkema Group Oroglas® V 045 Acrylic, Extrusion Grade  (discontinued **)
OROGLAS V 045 is a lubricated extrusion grade offering good combination of physical and optical properties.OROGLAS V 045 provides easy processing behavior.OROGLAS V 045 is recommended for extrusion..
Charpy Impact, Notched 0.200 - 2.70 J/cm²
0.952 - 12.8 ft-lb/in²
Average value: 0.477 J/cm² Grade Count:59
Overview of materials for Polypropylene with 40% Talc Filler
This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Talc Filler". Specific grades with primary filler content between 35% and 44% are..
Charpy Impact, Notched 0.200 - 1.40 J/cm²
0.952 - 6.66 ft-lb/in²
Average value: 0.514 J/cm² Grade Count:19
Overview of materials for Polyethylene Terephthalate (PET), Unreinforced
This property data is a summary of similar materials in the MatWeb database for the category "Polyethylene Terephthalate (PET), Unreinforced". Each property range of values reported is minimum and m..
Charpy Impact, Notched 0.200 J/cm²
0.952 ft-lb/in²
ISO 179/1eA
Lucite International Diakon® CLG357 Acrylic Polymer
Information provided by Lucite International
Copyright © lookpolymers.com All Rights Reserved