Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Mytex Polymers AS23KW-01 Polypropylene, Talc filled, Compounded Description: Talc filled compounded polypropylene produced for automotive interior applications using Mytex® Technology.Key Applications: General purpose interiorInformation provided by Mytex Polym.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | TPE-0105 (ASTM D792) |
ExxonMobil Vyram™ 9271-55 Thermoplastic Rubber
(discontinued **) A colorable thermoplastic elastomer which complies with FDA regulations for rubber articles intended for repeated use, as well as rubber articles in contact with non-fatty, non-oily foods as closure.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792B |
Dow INSPIRE™ TF1302 TPO
(discontinued **) Medium Flow, High Impact, Filled TPOInformation provided by DowThe Inspire brand was spun off from Dow Chemical to Styron in 2010, although this grade had previously been removed from Dow's standard.. |
|||
Density | 1.00 g/cc | 0.0362 lb/in³ | Calculated from weight of 45 oz/sy |
Mid-Mountain Materials ARMATEX® SF45 Silicone Rubber Coated Glass Fabric Description: Armatex Coatings are applied to base textiles that range in chemical composition, confiation and weight. Mid-Mountain specializes in engineered coatings, both polymer and mineral based... |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Multibase Multi-Flex® TPE A 3104-10 AGATE 5ES The material is based on Kraton G rubber. It has been engineered for single shot. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
LyondellBasell Hostacomâ„¢ CB189FC/1 Thermoplastic Polyolefin Elastomer Description: Hostacomâ„¢ CB189FC/1 medium melt flow, 1,300 MPa flexural modulus, precolored, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good balance of impact, stiffne.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Solvay Chemicals NOCOLOK® Precoating (water soluble) NOCOLOK® Precoating can be used in mixture with NOCOLOK® Flux or NOCOLOK® Zn Flux and water to improve adhesion of the flux coating. Uses: Automotive Sector, Commercial & Residential Air C.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Techmer ES Electrablend® ABS 03106 MB Stainless Steel Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Stainless Steel FiberFeatures: Electromagnetic Shielding (EMI)Information provided by TP Composites, Inc. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP THERMOCOMP MF003SU PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MF003SU is a compound based on polypropylene resin containing Glass Fiber. Added features include : Heat Stabilized, UV-Stabilized. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Solvay ALKAMULS® AP Surfactant Description: Ethoxylated oleic acid with low free PEG contentIdentification: ETHOXYLATED OLEIC ACIDCAS: 9004 – 96 – 0Available in: Asia Pacific, Europe, Latin America Solubility: Dispersib.. |
|||
Density | 1.00 - 1.15 g/cc | 0.0361 - 0.0415 lb/in³ | ASTM D792 |
Sumitomo Bakelite North America EM 7400-2 Long Glass Fiber Reinforced Epoxy EM 7400-2 is a polyaramide fiber reinforced epoxy molding compound, which features abrasion resistance and light weight.Information provided by Sumitomo Bak North America, Inc. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
UBE PAE1200U Nylon Elastomer Description: UBESTA Nylon 12 ElastomerInformation provided by UBE. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 - ISO 1183 |
DuPont Elvaloy® HP4051 Ethylene/N-Butyl Acrylate/Carbon Monoxide Copolymer Specialized copolymers deliver flexibility, toughness and weatherability to adhesives, plastics, highways and roofing.Availability: GloballyInformation provided by DuPont. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Washington Penn High Modulus Polypropylene Copolymer 15% Mica Filled Mica-filled polypropylene compounds provide the best strength and modulus of any of the particulate fillers which results in an outstanding balance of properties. Mold shrinkage is similar to ABS a.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Trelleborg Emerson & Cuming Eccobond® 9 General Purpose Catalyst Emerson & Cuming 9 Eccobond® General Purpose CatalystGeneral purpose, low viscosity. Imparts good physical strength and chemical resistance to cured castings. Recommended for most general purpose a.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
Polyram RamOfin PPH300G3 Polypropylene, 15% Glass Fiber 15% Glass fiber reinforced polypropylene for injection molding application.Information provided by Polyram. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Dow Corning SYL-OFF® PMCPSL 6 Crosslinker Minimizes mist at speeds up to 1600 m/min, good balance of cure and anchorage performance.Information provided by Dow Corning |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Dow Corning SYL-OFF® PMCPSL 8 Crosslinker Syl-Off SL 8 Crosslinker is very fast cure (contains mist reduction additive)Information provided by Dow Corning |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® TR 90 LXS PAMACM12 Product description: Grilamid TR 90 LXS natural is a high purity transparent thermoplastic polyamide, based on aliphatic and cycloaliphatic monomers. Grilamid TR 90 LXS natural contains a processing.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
DuPont Performance Polymers Hytrel® HTR4275 BK316 Polyester Elastomer TPC-ET
(Unverified Data**) 55 Shore D High Viscosity Polyester Elastomer with Good Heat Ageing Protection Developed for Blow Molding Hytrel HTR4275 BK316 is designed for blow molding or processing techniques requiring high me.. |
|||
Density | 1.00 g/cc @Temperature 15.0 °C |
0.0361 lb/in³ @Temperature 59.0 °F |
|
ExxonMobil Kutwell 82 KUTWELL is the trademark for a line of two high-performance "soluble" cutting fluids for cooling and lubricating the tool and work in machining operations. The line includes one petroleum-base fluid.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Arkema Group Rilsan® BMV 400 TL Nylon 11 (Conditioned) Designation ISO 1874-PA11,M,18-002,ZFlexible grade for injection molding. Available color: natural. Light and heat stabilized. Plasticizing agent free.Outstanding impact strength and tear spreading .. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
BASF Procom® D 1173 Polypropylene Data was collected by ISO methods and provided by BASF. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Beijing Chemical Industry KAIFA® GL2100 ABS Good Flow Grade Good flow, Easy processing, High glossInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
Arkema Group Pebax® 4033 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 4033 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
Arkema Group Rilsan® 6733 Nylon 11, Flexible Tubing Grade (Conditioned) Designation ISO 1874-PA11/xx,E,18-002Transparent and flexible copolymer for tubes extrusion. Additive free.High flexibility. Very good transparency. High chemical resistance.USP XXIII class VI appro.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | |
3M TMW Tubing 3M TMW Tubing is a semi-rigid translucent heat-shrinkable polyolefin tubing that is co-extruded and selectively cross-linked with an integral, meltable inner wall. When heated in excess of 135°C th.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ASTM D792 |
Techmer ES Statiblend® PP FR BK Availability: North AmericaForms: PelletsFeature: Flame Retardant, Homopolymer and Semi ConductiveUL File Number: E157318Information provided by TP Composites, Inc. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
EMS-Grivory Grivory® BRZ 334 H PA6 Product description: Grilon BRZ 334 H is a heat stabilized, medium viscosity, high impact modified PA6 extrusion grade. Grilon BRZ 334 H has the following important properties:High impact strength a.. |
|||
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 |
Polyplastic TechnoTep A® 65 A Thermoplastic Elastomer, Mineral Filled Low mineral filled, good flexibilityInformation provided by PolyPlastic Group. |