SABIC Innovative Plastics Cycolac® MG47F ABS (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , ABS Polymer
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Cycolac®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics Cycolac® MG47F ABS (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Multi-purpose, injection molding ABS providing a favorable balance of engineering properties. FDA compliant.

Physical Properties	Metric	English	Comments
Specific Gravity	1.04 g/cc	1.04 g/cc	ASTM D792
Density	1.04 g/cc	0.0376 lb/in³	ISO 1183
Viscosity	225000 cP	225000 cP	Melt Viscosity, 240°C, 1000 sec-1; ASTM D3825
Linear Mold Shrinkage, Flow	0.0050 - 0.0080 cm/cm @Thickness 3.20 mm	0.0050 - 0.0080 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	5.6 g/10 min @Load 3.80 kg, Temperature 230 °C	5.6 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238
	18 g/10 min @Load 10.0 kg, Temperature 220 °C	18 g/10 min @Load 22.0 lb, Temperature 428 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	112	112	ASTM D785
Tensile Strength at Break	33.0 MPa	4790 psi	Type I, 5 mm/min; ASTM D638
	35.0 MPa	5080 psi	50 mm/min; ISO 527
Tensile Strength, Yield	44.0 MPa	6380 psi	Type I, 5 mm/min; ASTM D638
	47.0 MPa	6820 psi	50 mm/min; ISO 527
Elongation at Break	24 %	24 %	Type I, 5 mm/min; ASTM D638
	25 %	25 %	50 mm/min; ISO 527
Elongation at Yield	2.0 %	2.0 %	Type I, 5 mm/min; ASTM D638
	2.6 %	2.6 %	50 mm/min; ISO 527
Tensile Modulus	2.27 GPa	329 ksi	5 mm/min; ASTM D638
	2.37 GPa	344 ksi	1 mm/min; ISO 527
Flexural Yield Strength	70.0 MPa	10200 psi	1.3 mm/min, 50 mm span; ASTM D790
	70.0 MPa	10200 psi	2 mm/min; ISO 178
Flexural Modulus	2.20 GPa	319 ksi	2 mm/min; ISO 178
	2.30 GPa	334 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	3.20 J/cm	5.99 ft-lb/in	ASTM D256
Izod Impact, Notched (ISO)	22.0 kJ/m²	10.5 ft-lb/in²	80104; ISO 180/1A
	8.00 kJ/m² @Temperature -30.0 °C	3.81 ft-lb/in² @Temperature -22.0 °F	80104; ISO 180/1A
Charpy Impact, Notched	2.60 J/cm²	12.4 ft-lb/in²	Edgew 80104 sp=62mm; ISO 179/1eA
	0.900 J/cm² @Temperature -30.0 °C	4.28 ft-lb/in² @Temperature -22.0 °F	Edgew 80104 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	30.0 J @Temperature 23.0 °C	22.1 ft-lb @Temperature 73.4 °F	ASTM D3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	88.2 µm/m-°C @Temperature -40.0 - 40.0 °C	49.0 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
CTE, linear, Transverse to Flow	88.2 µm/m-°C @Temperature -40.0 - 40.0 °C	49.0 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi)	94.0 °C @Thickness 3.20 mm	201 °F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	81.0 °C	178 °F	Flatw 80104 sp=64mm; ISO 75/Af
	80.0 °C @Thickness 3.20 mm	176 °F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	98.0 °C	208 °F	Rate B/50; ISO 306
	99.0 °C	210 °F	Rate B/50; ASTM D1525
	100 °C	212 °F	Rate B/120; ISO 306
UL RTI, Electrical	60.0 °C	140 °F	UL 746B
UL RTI, Mechanical with Impact	60.0 °C	140 °F	UL 746B
UL RTI, Mechanical without Impact	60.0 °C	140 °F	UL 746B
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL 94

Electrical Properties	Metric	English	Comments
Arc Resistance	60 - 120 sec	60 - 120 sec	Tungsten; ASTM D495
Comparative Tracking Index	>= 600 V	>= 600 V	UL 746A
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
High Amp Arc Ignition, HAI	>= 120 arcs	>= 120 arcs	UL 746A
High Voltage Arc-Tracking Rate, HVTR	80.0 - 150 mm/min	3.15 - 5.91 in/min	UL 746A

Users viewing this material also viewed the following: