Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polykemi AB POLYfill PPH K20020 D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant Information provided by Polykemi AB |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polykemi AB POLYfill PPH T20020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Polykemi AB POLYfill PPHC K3020 Polypropylene, Mineral Reinforced Information provided by Polykemi AB |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Ineos Nova 4214 Medium Impact Polystyrene
(discontinued **) Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Polimeri Europa SINKRAL C433/M3 ABS, Heat Stabilized
(discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,EG,095-08-16-15 Special low gloss grade for extrusion and calendering, with high mattness and medium impact resist.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Polimeri Europa SINKRAL PD G523 ABS, Impact Grade
(discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-15-25-20 High impact injection moulding grade. Other characteristics: good flow, excellent thermal stabilit.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Polimeri Europa SINKRAL PD M323 ABS
(discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-25-16-25 General purpose injection moulding grade that exhibits outstanding flow and thermal stability duri.. |
|||
Density | 1.04 g/cc | 0.0377 lb/in³ | |
Mallard Creek Polymers Rovene® 6115 Resin Supported Emulsion Rovene® 6115 is a hard, non-film forming vehicle that is neutralized with sodium hydroxide for flexographic and gravure inks and overprint varnishes primarily for use on paper and paperboard subs.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Inno-Comp INNOPOL® CS 2-7120 20% Talc Filled Polypropylene Copolymer INNOPOL® CS 2-7120 is a 20 % talc-filled polypropylene block-copolymer compound /PP-B TD20 (ISO 1043)/. This grade is available in natural and custom colored form.INNOPOL® CS 2-7120 is recomme.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Momentive Performance Materials IS808 Translucent Adhesive Sealant, General Purpose Paste One-part acetoxy cure. Acetoxy cure silicones are the most commonly used type of RTV materials and are considered GE Silicones' general purpose product line. Typical uses: Use for general purpose,.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Momentive Performance Materials RTV123 Black Adhesive Sealant, General Purpose Paste One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: General purpose for bonding .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792B |
LyondellBasell Astryn BB724AC Polypropylene Copolymer Key Features: medium high melt flow, high modulus, mineral-filled polypropylene copolymer, high rigidity, good impact resistance, good processabilityApplications: automotive heater and A/C ductworkD.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Techmer ES HiFill® HIPS 484 GY Availability: North AmericaForms: PelletsAppearance: GreyInformation provided by TP Composites, Inc. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM Data |
Styron Magnum™ 9035 ABS, High Gloss MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Solvay ALKAMULS® B Surfactant Description: Ethoxylated castor oil Emulsifier for oil and waxes in water based formulations. Emulsifier for fats, oils, fatty acids, waxes and solvents. Used as dispersant for pigments and iron pow.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Suzhou Hipro Polymers Hiprolon® 200 NN Nylon 1010, dry Hiprolon® 200 NN is a medium viscosity polyamide 10,10 with neat resin based on bio-renewable resource. It features low density, low water absorption, good cold impact resistance, good wear-resi.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Borealis Polycure™ PC531 Track Resistant Crosslinking Polyethylene Compound for Overhead Cable Insulation Polycure PC531 is a black, chemically crosslinking polyethylene compound that is designed for use in track resistant overhead cable insulation and jacketing.Polycure PC531 is suitable for use in pow.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
DuPont Conpol™ 20B Ethylene-Methacrylic Acid Additive Resin Conpol™ additive resins, supplied in pellet form, are designed to modify the surface properties of films or coatings of Surlyn® ionomer resins and Nucrel® acid copolymer resins. They are concentr.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Chi Mei Polylac® PA-716 ABS - High Flow High flow, medium impact |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
DuPont Performance Polymers Hytrel® 6359FG NC010 Polyester Elastomer TPC-ET
(Unverified Data**) 63 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
Eurotec® Tecomid® NB40 NL IH PA 6 impact modified Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Arkema Group Orgalloy® LT 4060 Flexible Nylon Alloy (Conditioned) Very flexible polyamide alloy: easy to process, low moisture absorption, good mechanical properties at low temperature. Demonstrates a good balance of properties eg, high flexibility (200 MPa), good.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
3M Cornerstone™ Floor Sealer/Finish 3M Cornerstone Floor Sealer/Finish is a water-based emulsion floor sealer/finish. It is milky-white in appearance and composed of resins, polymers, emulsifiers, surfactants, and water.Information pr.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 |
BASF Ultramid® HFX 33 PA6 (Dry) Description: Ultramid HFX 33 is a polyamide specialty extrusion resin combining high flexibility, excellent burst performance and outstanding chemical resistance. It offers high melt strength and en.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
3M Scotch-Weld™ MG90-77 UV Medical Grade Light Cure Adhesive 3M™ Scotch-Weld™ Medical Grade Light Cure Adhesive is a single component adhesive that cure to give clear bonds when exposed to appropriate ultraviolet or visible light. It contains a fluorescing .. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Ineos Nova 5104 High Impact Polystyrene
(discontinued **) Good balance of toughness and rigidity, USP Class VIApplications: Spools and reels, Thermoformed and molded packaging, Photographic cartridges, AppliancesProperties were determined on injection mold.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | ASTM D792 |
Ineos Nova 5420 High Impact Polystyrene
(discontinued **) High impact, Good environmental stress crack resistance, USP Class VIApplications: Thermoformed containers and lids, Hot and cold beverage cups, Custom sheetProperties were determined on injection m.. |
|||
Density | 1.04 g/cc | 0.0376 lb/in³ | |
Solvay RHODOCLEAN® MSC Surfactant Identification: ETHOXYL-PROPOXYL TERPENECAS: 174955 – 61 – 4Available in: Asia Pacific, Europe and Latin AmericaSolubility: Soluble in water and most polar solvents. Insoluble in aromatic solvents.. |