Ravago Manufacturing Americas Hylon® N1000NL Nylon 6/6 (DAM) (discontinued **)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ravago Manufacturing Americas Hylon® N1000NL Nylon 6/6 (DAM) (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ravago.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/in³	ASTM D792
Water Absorption	1.1 %	1.1 %	24 hrs; ASTM D570
Linear Mold Shrinkage	0.012 cm/cm	0.012 in/in	0.125 in; ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	87	87	ASTM D785
Tensile Strength at Break	93.8 MPa	13600 psi	ASTM D638
Elongation at Break	30 %	30 %	ASTM D638
Flexural Strength	117 MPa	17000 psi	ASTM D790
Flexural Modulus	3.10 GPa	450 ksi	ASTM D790
Izod Impact, Notched	0.481 J/cm	0.900 ft-lb/in	73°F; ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	82.8 µm/m-°C @Temperature 20.0 °C	46.0 µin/in-°F @Temperature 68.0 °F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	246 °C	475 °F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	102 °C	215 °F	Unannealed; ASTM D648

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257
Dielectric Constant	3.7 @Frequency 100 Hz	3.7 @Frequency 100 Hz	ASTM D150
Dielectric Strength	21.9 kV/mm	555 kV/in	ASTM D149

Processing Properties	Metric	English
Melt Temperature	271 - 293 °C	520 - 560 °F
Mold Temperature	48.9 - 93.3 °C	120 - 200 °F
Drying Temperature	73.9 °C	165 °F
Dry Time	2 - 4 hour	2 - 4 hour
Moisture Content	0.20 %	0.20 %
Back Pressure	0.345 - 0.689 MPa	50.0 - 100 psi
Screw Speed	40 - 140 rpm	40 - 140 rpm

Descriptive Properties	Value	Comments
Holding Pressure	400 to 1400 psi
Injection Rate	Fast

Users viewing this material also viewed the following: