- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Heat Stabilized
- Polyram PlusTek PA600 Nylon 6.6, Heat Stabilized
Polyram PlusTek PA600 Nylon 6.6, Heat Stabilized
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Heat Stabilized |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PA600 Nylon 6.6, Heat Stabilized.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | DIN 53479 |
| Water Absorption | 8.5 % | 8.5 % | DIN 53495 |
| Moisture Absorption at Equilibrium | 2.8 % | 2.8 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.011 - 0.018 cm/cm | 0.011 - 0.018 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM-D785 |
| Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM-D638 |
| Elongation at Break | 10 % | 10 % | ASTM-D638 |
| Flexural Strength | 115 MPa | 16700 psi | ASTM D790 |
| Flexural Modulus | 2.60 GPa | 377 ksi | ASTM-D790 |
| Izod Impact, Notched | 0.600 J/cm @Temperature 23.0 °C |
1.12 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 256 °C | 493 °F | |
| Maximum Service Temperature, Air | 115 °C | 239 °F | Continuous Use |
| >= 180 °C | >= 356 °F | Short peaks operation | |
| Deflection Temperature at 0.46 MPa (66 psi) | 100 °C | 212 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 205 °C | 401 °F | DIN 53461 |
| Flammability, UL94 | V-2 @Thickness 3.00 mm |
V-2 @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | DIN 53482 |
| Dielectric Constant | 3.3 @Frequency 1e+6 Hz |
3.3 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 120 kV/mm | 3050 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Proto3000 Objet Digital Materials™ DM_9885/9785 Rubber-like Prototyping Polymer
- Plaskolite Optix® PL-30 Acrylic Resin (discontinued **)
- ICO Polymers ICOFLOâ„¢ 510-5028 400 Micron LLDPE Powder
- IDI Composites W-103 Thermoset Polyester, Molding
- Techmer ES HiFill® PP 0142 B Polypropylene
- Total PPH 3429 Polypropylene, Injection Molding Grade
- A. Schulman FORMION™ FI 341 Ionomer
- Dow Corning 204 Fluid
- Sax Polymers SAXAMID 236F6Q32 Nylon 6.6, 30% Glass Fiber
Copyright © lookpolymers.com All Rights Reserved