| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 40% Mineral Filled |
| Manufacturer | Plastcom spol. s r.o. |
| Trade Name | SLOVAMID 66 |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Plastcom SLOVAMID 66 T 40 FRO 3 PA66, 40% mineral filling, flame retardant.pdf |
| Price | EMAIL US sales@lookpolymers.com |
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.50 g/cc | 0.0542 lb/in³ | |
| Viscosity Measurement | 1.15 - 1.19 | 1.15 - 1.19 | |
| Linear Mold Shrinkage | 0.0115 cm/cm | 0.0115 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0119 cm/cm | 0.0119 in/in | |
| Melt Flow | 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C |
3.0 g/10 min @Load 0.716 lb, Temperature 518 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 70.0 MPa | 10200 psi | |
| Elongation at Break | 2.0 % | 2.0 % | |
| Tensile Modulus | 5.80 GPa | 841 ksi | |
| Flexural Strength | 120 MPa | 17400 psi | |
| Flexural Modulus | 6.00 GPa | 870 ksi | |
| Charpy Impact Unnotched | 3.10 J/cm² @Temperature -20.0 °C |
14.8 ft-lb/in² @Temperature -4.00 °F |
|
| 3.20 J/cm² @Temperature 23.0 °C |
15.2 ft-lb/in² @Temperature 73.4 °F |
||
| Charpy Impact, Notched | 0.200 J/cm² @Temperature -20.0 °C |
0.952 ft-lb/in² @Temperature -4.00 °F |
|
| 0.300 J/cm² @Temperature 23.0 °C |
1.43 ft-lb/in² @Temperature 73.4 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 260 °C | 500 °F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 135 °C | 275 °F | |
| Vicat Softening Point | 240 °C | 464 °F | B |
| Flammability, UL94 | V-2 | V-2 | |
| Glow Wire Test | 960 °C | 1760 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | |
| Dielectric Strength | 40.0 kV/mm | 1020 kV/in | |
| Comparative Tracking Index | 300 V | 300 V |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 280 - 310 °C | 536 - 590 °F | |
| Mold Temperature | 80.0 - 120 °C | 176 - 248 °F | |
| Drying Temperature | 80.0 °C | 176 °F | |
| Dry Time | 4 hour | 4 hour | |
| Moisture Content | 0.15 % | 0.15 % | |
| Injection Pressure | 70.0 - 120 MPa | 10200 - 17400 psi |