- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Multibase Multi-Pro® 3018 TU Polypropylene
Multibase Multi-Pro® 3018 TU Polypropylene
| Category | Polymer , Thermoplastic , Polypropylene (PP) |
| Manufacturer | Multibase |
| Trade Name | Multi-Pro® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Pro® 3018 TU Polypropylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Talc Filled, 30% by weight.Forms:PelletsProcessing Methods:Injection MoldingUses: Automotive Under the HoodInformation provided by Multibase
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.12 g/cc | 0.0405 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0085 cm/cm | 0.0085 in/in | ASTM D955 |
| Melt Flow | 18 g/10 min | 18 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 29.0 MPa | 4200 psi | ASTM D638 |
| Elongation at Break | 25 % | 25 % | ASTM D638 |
| Flexural Modulus | 2.55 GPa | 370 ksi | ASTM D790 |
| Izod Impact, Notched | 0.427 J/cm | 0.800 ft-lb/in | 73°F; ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 124 °C | 255 °F | Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 199 - 221 °C | 390 - 430 °F | |
| Middle Barrel Temperature | 204 - 232 °C | 400 - 450 °F | |
| Front Barrel Temperature | 204 - 232 °C | 400 - 450 °F | |
| Nozzle Temperature | 193 - 227 °C | 380 - 440 °F | |
| Mold Temperature | 4.44 - 65.6 °C | 40.0 - 150 °F | |
| Drying Temperature | 93.3 °C | 200 °F | |
| Dry Time | 2 hour | 2 hour | |
| Back Pressure | 0.138 - 0.345 MPa | 20.0 - 50.0 psi | |
| Screw Speed | 40 - 100 rpm | 40 - 100 rpm |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Clamp Tonnage | 2-4 tons/in2 | |
| Screw L/D Ratio | 20:1 |
Users viewing this material also viewed the following:
- Omya OMYACARB® CP - LU Calcium Carbonate
- Solvay Specialty Polymers Amodel® DW-1140 Polyphthalamide (PPA) (Unverified Data**)
- Nilit RECONYL A KV30 Recycled nylon 6.6 for injection molding, 30% glass ball reinforced
- Kolon ELLAS K-796A Ester Based Thermoplastic Polyurethane
- A. Schulman POLYBATCH™ Yellow 26787V Concentrate Based In LDPE
- Arkema Group OREVAC® 18910 Maleic Anhydride Modified Copolymer
- 3M Controltac™ 162-114 Graphic Film
Copyright © lookpolymers.com All Rights Reserved