LG Chemical LUMID HI5001AS PA6/PO, High Barrier Property, CaCl2 Resistance, High Impact

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer	LG Chemical
Trade Name	LUMID
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LG Chemical LUMID HI5001AS PA6/PO, High Barrier Property, CaCl2 Resistance, High Impact.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Feature: Injection Molding, PA6/PO, High Barrier Property, CaCl2 Resistance, High ImpactApplication: Automotive (Fuel System Tube)CAS No. 25038-54-4, 9010-79-1, 9002-88-4 and 105-60-2Information provided by LG Chemical

Physical Properties	Metric	English	Comments
Specific Gravity	1.04 g/cc	1.04 g/cc	ASTM D792
Water Absorption	0.50 % @Temperature 23.0 Â°C, Time 86400 sec	0.50 % @Temperature 73.4 Â°F, Time 24.0 hour	ASTM D570
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 235 Â°C	1.0 g/10 min @Load 4.76 lb, Temperature 455 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	41.7 MPa @Thickness 3.20 mm	6040 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	330 % @Thickness 3.20 mm	330 % @Thickness 0.126 in	50mm/min; ASTM D638
Flexural Yield Strength	20.1 MPa @Thickness 6.40 mm	2920 psi @Thickness 0.252 in	10mm/min; ASTM D790
Flexural Modulus	0.481 GPa @Thickness 6.40 mm	69.7 ksi @Thickness 0.252 in	10mm/min; ASTM D790
Izod Impact, Notched	1.37 J/cm @Thickness 6.40 mm, Temperature -40.0 Â°C	2.57 ft-lb/in @Thickness 0.252 in, Temperature -40.0 Â°F	ASTM D256
	NB @Thickness 6.40 mm, Temperature 23.0 Â°C	NB @Thickness 0.252 in, Temperature 73.4 Â°F	ASTM D256

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	235 - 250 Â°C	455 - 482 Â°F	Injection Molding
Middle Barrel Temperature	240 - 260 Â°C	464 - 500 Â°F	Injection Molding
Front Barrel Temperature	240 - 260 Â°C	464 - 500 Â°F	Injection Molding
Nozzle Temperature	250 - 265 Â°C	482 - 509 Â°F	Injection Molding
Melt Temperature	250 - 265 Â°C	482 - 509 Â°F	Injection Molding
Mold Temperature	80.0 - 100 Â°C	176 - 212 Â°F	Injection Molding
Drying Temperature	70.0 - 90.0 Â°C	158 - 194 Â°F	Injection Molding
Dry Time	4.00 - 5.00 hour	4.00 - 5.00 hour	Injection Molding

Users viewing this material also viewed the following: