Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 20.0 kV/mm | 508 kV/in | STN IEC 60243 |
Plastcom SLOVAMID 6 FRB 4 Polyamide 6, Halogen Free Flame Retardant FeaturesPA 6 for injection moulding with increased flammability resistance. Halogen-free flame retardant. Intended for electrical purposes. Manufacturing of simple large scale products. Good flo.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | STN IEC 60243 |
Plastcom SLOVAMID 6 FRC 2 LS Polyamide 6, Halogen Free Flame Retardant, Light Stabilization FeaturesLongterm external use is possible because of the material stabilization with the light stabilizers on the HALS basis. Meets the flammability in accordance with the norm DIN 4102 - B1. PA 6.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | |
Pyrotek TS-84 Thermoset Electrical Insulation Product (Nema Grade: XX) Paper reinforcement, Phenolic Resin, Natural/Black Color. Good insulation in dry or humid conditions.Information provided by Pyrotek. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 3.20 mm |
508 kV/in @Thickness 0.126 in |
in air; ASTM D 149 |
SABIC Innovative Plastics Lexan® PPC4701R PPC High heat resistant polyphthlate carbonate, provides DTUL of 300F at 264 psi. Internal mold release.This data was supplied by SABIC-IP for the Americas region. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Gharda Chemicals Gafone™ 3610GM20 Polyethersulfone (PES)
(discontinued **) Characteristics: Excellent Thermal Resistance - Tg 224°C Outstanding Mechanical, Electrical, Flame & Chemical Resistance Very good Hydrolytic & Sterilization Resistance Good Optical Cl.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Solvay Specialty Polymers Ryton® BR42B Polyphenylene Sulfide Compound
(Unverified Data**) Natural Color Polyphenylene Sulfide CompoundRyton® BR42B is a 40% fiberglass reinforced polyphenylene sulfide compound specially formulated to have a low coefficient of friction for use in low surf.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | 4kV/s; ASTM D149 |
LG Chemical IF850 PMMA, General Purpose Grade for Injection Molding High flowability gradeParticularly recommended for complicated profiles or large and thin wall partsFeatures: Excellent transparency and eleganceWeather resistance and chemical resistanceSurface har.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149/DIN 53481 |
Kolon KOPA® KN1322VO Flame Retardant Nylon 6 KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in automobile and industrial parts.Good mechanical properties, outstanding self-lubr.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149/DIN 53481 |
Kolon KOPA® KN333MS Low Friction Nylon 66 KOPA® is a thermoplastic resin with excellent mechanical, thermal and electrical properties and is widely used in the automobile, electrical and industrial parts.High tensile strength, outstandin.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149/DIN 53481 |
Kolon KOPET® KP133G45 FR-PET Resin KOPET® is the FR-PET which realizes the good properties and surface of injection molding with good mold process of short cooling time in low molding temperature.Good mold release, good surface of.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Kotec Carbotex K-20UVR Polycarbonate, General Purpose, UV Stability + Mold Release Grade Features: UV stability, Mold release, Low viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting Covers, Safety products, E & E parts, Household app.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Kotec Carbotex K-40UV Polycarbonate, General Purpose, UV Stability Grade Features: UV stability, Medium viscosity, TransparentApplications: OA equipment, Communications, Precision parts, Machineries, Lighting fixtures, Safety products, E & E parts, Household applications.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Kotec Carbotex KG-15MRA Polycarbonate, 15% Glass Fiber Reinforced Features: Glass fiber 15% reinforced, Mold release, Translucent, Dimensional stability, Flame retardant, High rigidityApplications: OA equipment, Communications, Precision parts, Machineries, E & E .. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | |
Momentive Performance Materials IS808 One-Component, Paste Consistency Silicone Rubber Adhesive Sealant, Translucent IS800 series one-component, ready-to-use silicone adhesive sealants have a paste-like consistency and cure to silicone rubber on exposure to atmospheric moisture at room temperature. Because these .. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Lucky IG-840 Acrylic, Injection Grade General purpose injection molding grade. May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, high heat and weather resistance, excellent chemical resistance and col.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 2.00 mm |
508 kV/in @Thickness 0.0787 in |
ASTM D149 |
Gromax CCP ABS/PBT 7320H-104 20% Glass Fiber Filled Product Description: A 20% glass fiber reinforced injection molding grade. Characteristics:Low warp age and excellent dimensionally stable Excellent electrical property Excellent mechanic and chemi.. |
|||
Dielectric Strength | >= 20.0 kV/mm @Thickness 2.00 mm |
>= 508 kV/in @Thickness 0.0787 in |
ASTM D149 |
Gromax PBT 1200-211L Product Description: PBT unreinforced middle viscosity injection molding grade. Characteristics:Excellent electrical property Excellent temperature resistance, high heat distortion temperature. Exce.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 2.00 mm |
508 kV/in @Thickness 0.0787 in |
ASTM D149 |
Gromax PBT 2100-104B Product Description: PBT unreinforced flame-retarded injection molding grade. Characteristics:Excellent electrical property Excellent mechanic and chemical property Excellent weatherability Excellen.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | |
Momentive Performance Materials IS802 One-Component, Paste Consistency Silicone Rubber Adhesive Sealant, White IS800 series one-component, ready-to-use silicone adhesive sealants have a paste-like consistency and cure to silicone rubber on exposure to atmospheric moisture at room temperature. Because these .. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | |
Momentive Performance Materials IS802 White Adhesive Sealant, General Purpose Paste One-part acetoxy cure. Acetoxy cure silicones are the most commonly used type of RTV materials and are considered GE Silicones' general purpose product line. Typical uses: Use for general purpose,.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 1.60 mm |
508 kV/in @Thickness 0.0630 in |
ASTM D149 |
Solvay Specialty Polymers Amodel® AS-4133 HS Polyphthalamide (PPA), 33% Glass Fiber (Conditioned) Amodel® AS-4133 HS is a 33% glass reinforced, lubricated, heat stabilized grade of polyphthalamide (PPA) that offers fast cycle times and moldability in hot water molds. Testing conducted on samp.. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
Shinkong Synthetic Fibers Shinite® T101G45 PET, 45% Glass Filled Information from Shinkong Synthetic Fibers Corp. |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 |
DSM Arnitel® EM460 Polyether Ester Elastomer (European and Asian Grade) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn.. |
|||
Dielectric Strength | 20.0 - 24.0 kV/mm @Thickness 3.20 mm |
508 - 610 kV/in @Thickness 0.126 in |
Short time; ASTM D149 |
Daikin NEOFLON M-300H PCTFE Granular Molding Powder NEOFLON PCTFE M-300 series is used for general purpose applications.Description:Granular powders.Processing Methods: Compression molding, extrusion.Uses: Sheets, rods, tubing.Information provided by.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 1.00 mm |
508 kV/in @Thickness 0.0394 in |
IEC 60243 |
Ascend Performance Materials Vydyne® R513H Black Nylon 66, 13% Glass Reinforced, DAM Vydyne® R513H Black is general-purpose, 13% glass-fiber reinforced, heat-stabilized PA66 resin. Available in black, it is an injection-molding grade that is lubricated for machine feed, flow, and m.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 0.190 mm |
507 kV/in @Thickness 0.00750 in |
Silicone Rubber Insulator; ASTM D149 |
3M 5640 Silicone Rubber Termination Kits 3M™ 5640 and 5650 Series Quick Term II Silicone Rubber Termination Kits are one-piece Cold Shrink™ terminations for Jacketed Concentric Neutral (JCN) power cable. They meet the requirements of IEE.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 2.00 mm |
508 kV/in @Thickness 0.0787 in |
ASTM D149 |
Beijing Chemical Industry KAIFA® M106N MPPO Resin High Flame retardant, High thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | in transformer oil; IEC 60243-1 |
CENTROPLAST CENTROFLON Polyvinylidene fluoride This material has very good chemical and temperature resistance, with good slip characteristics. Its applications include pump wheels, flanges, valve bodies, and laboratory equipment.Information pr.. |
|||
Dielectric Strength | 20.0 kV/mm @Thickness 2.00 mm |
508 kV/in @Thickness 0.0787 in |
ASTM D149 |
Beijing Ranger Chem PBT-MFC-G30 FR PBT Modified PBT Characteristics: Unreinforced grades have abundant strength and flexibility, and have strong characteristics against brittleness. UL-certified slow-burning (94HB) and self-extinguishin.. |