- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Ether/PPO
- Beijing Chemical Industry KAIFA® M106N MPPO Resin
Beijing Chemical Industry KAIFA® M106N MPPO Resin
| Category | Polymer , Thermoplastic , Polyphenylene Ether/PPO |
| Manufacturer | Beijing Chemical Industry Research Institute (Group) |
| Trade Name | KAIFA® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Beijing Chemical Industry KAIFA® M106N MPPO Resin.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High Flame retardant, High thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group)
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | 24 hr; ASTM D570 |
| Linear Mold Shrinkage | 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 60.0 MPa | 8700 psi | ASTM D638 |
| Elongation at Break | 30 % | 30 % | ASTM D638 |
| Flexural Strength | 88.0 MPa | 12800 psi | ASTM D790 |
| Flexural Modulus | 2.40 GPa | 348 ksi | ASTM D790 |
| Charpy Impact, Notched | 1.50 J/cm² | 7.14 ft-lb/in² | ISO179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
38.9 µin/in-°F @Temperature -22.0 - 86.0 °F |
ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 120 °C | 248 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 3.20 mm |
V-0 @Thickness 0.126 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.8 @Frequency 1e+6 Hz |
2.8 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 20.0 kV/mm @Thickness 2.00 mm |
508 kV/in @Thickness 0.0787 in |
ASTM D149 |
| Dissipation Factor | 0.0070 @Frequency 1e+6 Hz |
0.0070 @Frequency 1e+6 Hz |
ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 260 °C | 500 °F | |
| Middle Barrel Temperature | 280 °C | 536 °F | |
| Front Barrel Temperature | 280 °C | 536 °F | |
| Nozzle Temperature | 275 °C | 527 °F | |
| Mold Temperature | 80.0 °C | 176 °F | |
| Injection Pressure | 120 MPa | 17400 psi | |
| Cycle Time - Injection | 35 sec | 35 sec | |
| Screw Speed | 70 rpm | 70 rpm |
Users viewing this material also viewed the following:
- Multibase Multi-Pro® 3019 CXUW Polypropylene
- Gromax BFM40-DL04N1 Nylon 6 40% Mineral Filled (Dry)
- Solvay Technyl® C 218 V50 50% Glass Filled, Heat Stabilized Nylon 6
- SSAB Tunnplat Aluzink B500A Metal-coated Mild Steel
- Eastman Tenite 285E3720005 Butyrate Clear, Trsp
- EMS-Grivory Grivory® TSS/4 LF 2 PA666
- DuPont Teijin Films Mylar® RL32 Polyester Packaging Film, 75 Gauge
- AK Steel 409 Ferritic Stainless steel
- Bhansali Engineering Abstron SE-20P ABS Sheet Extrusion Grade
- Parker Chomerics CHO-SHIELD® 1086 Silicone Adhesive Primer
Copyright © lookpolymers.com All Rights Reserved