Polymer Property : Tensile Strength at Break = 80.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	80.0 MPa	11600 psi	STN EN ISO 527-2
Plastcom PLASTALEN® PH 69 GF 30 Polypropylene reinforced with glass fiber Modified homopolymer PP for injection molding, reinforced with 30% glass fiber. Applied in all industry branches. Delivered in natural mode and in the full RAL color scale.Information Provided by Pl..
Tensile Strength at Break	80.0 MPa	11600 psi	STN EN ISO 527-2
Plastcom SLOVAMID 6 G 5 Polyamide 6, 5% Graphite FeaturesPA 6 for injection moulding with addition of 5% graphite, the PA surface rolling resistance force is significantly lowered. Used mainly in the product of crates and cases for bearings, slid..
Tensile Strength at Break	80.0 MPa	11600 psi	ISO.527 DN.53455
Polimersan Plastics POLIPA® (PA 6) Polyamide POLIPA® PA6 (POLYAMIDE) is produced by poly condensation of e-aminoacid and by the help of d-carbon acid and d-amine poly condensation. Its characteristics depend upon the numbers of the main struc..
Tensile Strength at Break	80.0 MPa	11600 psi	ISO 527
Nilit FRIANYL B63 W-KV30 Nylon 6 for injection molding, 30% glass ball reinforced Nylon 6 for injection molding, heat stabilized.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Tensile Strength at Break	80.0 MPa	11600 psi	Conditioned; ISO 527-1/-2
Lanxess DurethanÂ® DP 1852/30 000000 Nylon 6, 30% Glass Fiber PA 6, 30% glassfibers, UL V-0 at 0.75 mm (listed),GWIT:775Â°C at 0,75 mm, GWFI:960Â°C at 0.75 mm, CTI/A:400, good flowabilityApplication Examples: Hand-held barrel pump housings
Tensile Strength at Break	80.0 MPa	11600 psi	ISO 527
Grupo Repol DinalonÂ® B3S25 PA6 Unreinforced Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol
Tensile Strength at Break	80.0 MPa	11600 psi
LATI Latiohm 80-05 CNT GCE/500 PPS, Glass/Mineral Reinforced Semiconductive/dissipative product based on Polyphenylene Sulfide (PPS). Carbon nanotubes. Glass fibers / Mineral filler. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; No..
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
SABIC Innovative Plastics Ultem 1110V PEI (Europe-Africa-Middle East) Enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Tensile Strength at Break	80.0 MPa	11600 psi	50 mm/min; ISO 527
SABIC Innovative Plastics ULTEM 4002 PEI PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL 94 V0 and 5VA listing in recognized colors.
Tensile Strength at Break	80.0 MPa	11600 psi	ASTM D 638
SABIC Innovative Plastics LNP Thermocomp KF003 Acetal Copoly (Asia Pacific) LNP* Thermocomp* KF003 is a compound based on Acetal Copolymer resin containing Glass Fiber.This data was supplied by SABIC-IP for the Asia Pacific region.
Tensile Strength at Break	80.0 MPa	11600 psi	ASTM D638
Sumitomo Bakelite North America EpiallÂ® 1908-1 Short Glass Fiber Reinforced Epoxy Epiall 1908-1 is a short fiberglass reinforced epoxy molding compound, with excellent dimensional stability, good strength properties and good electrical insulation proper-ties that meets the requir..
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
SABIC Innovative Plastics NORYL GFN2V PPE+HIPS (Europe-Africa-Middle East) NORYL GFN2V is a 20 % glass fibre reinforced material with a HDT/A of 130C according ISO 75. NORYL GFN2V cust spec 1977 has been approved for potable water applications up to 85C by the UK WFBS acco..
Tensile Strength at Break	80.0 MPa	11600 psi	50 mm/min; ISO 527
SABIC Innovative Plastics ULTEM 1110 PEI (Europe-Africa-Middle East) Enhanced flow Polyetherimide (Tg 217C). Resin is RoHS compliant.
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
SABIC Innovative Plastics Ultem 1110V PEI (Asia Pacific) Enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing; color dependant, see UL Yellow Card.This data was supplied by SABIC-IP for the Asia Pacific region.
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
SABIC Innovative Plastics LNP THERMOCOMP 9X02841 PBT+PC LNP* Thermocmop* 9X02841 is a PBT/Polycarbonate blend containing proprietary fillers.
Tensile Strength at Break	80.0 MPa	11600 psi	ISO 527-93
Wellman Wellamid® 22LH-NBK4 Unfilled Nylon 66 Description: Unfilled Nylon 66Information provided by Wellman.
Tensile Strength at Break	80.0 MPa	11600 psi	ISO 527-93
Wellman Wellamid® NY1599-BK11 Unfilled Nylon 66 Description: Unfilled Nylon 66Information provided by Wellman.
Tensile Strength at Break	80.0 MPa	11600 psi
Toyobo ECOVYLOPET® EMC2311 PET Bottle Recycling Grade, 10% Glass Reinforced Features: PET Bottle Recycling Grade, 10% Glass Fiber Reinforced, General PurposeApplications: Automobile engine head coversHot platesVending machine partsUmbrella ribsInformation provided by Toyobo..
Tensile Strength at Break	80.0 MPa	11600 psi	ASTM D638
A. Schulman SCHULAMID® 66 MK30HI 30% Mineral Reinforced, Impact Modified Nylon 66 Information provided by A. Schulman.
Tensile Strength at Break	80.0 MPa	11600 psi	ASTM D 638
Cossa Polimeri ESTAPROP H 1660 GFC Polypropylene, 30% Glass Filled PP homopolymer 30% chemically coupled glass fiber reinforcedHigh melt flow rate, excellent impact strengthInformation provided by Cossa Polimeri S.r.l.
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
CP-Polymer-Technik Wellamid® 6600 GV 15 HWCP 15% Glass Fiber Nylon 66, Heat Stabilized, Conditioned Information provided by CP-Polymer-Technik GmbH & Co. KG
Tensile Strength at Break	80.0 MPa	11600 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® LV-15H nat PA12-GF15 Product description: Grilamid LV-15H is a 15% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following product profile: very low water absorptiongood dimension..
Tensile Strength at Break	80.0 MPa	11600 psi	ISO 527
Eurotec® Tecomid® NA40 NL XA 20 PA 6.6 unreinforced, UL94 V0 Excellent stiffness/toughness balanceHigh mechanical strengthVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance and low frictionVery good..
Tensile Strength at Break	80.0 MPa	11600 psi	5 [mm/min]; ISO 527-1/2
Akro-Plastic Akromid® A3 GF 15 (2418) PA 6.6 Conditioned, 15% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Tensile Strength at Break	80.0 MPa @Temperature -40.0 °C	11600 psi @Temperature -40.0 °F	ISO Data
BASF Ultramid® 8202 PA6 (Conditioned) Ultramid 8202 is a low viscosity, general purpose polyamide 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is also available in heat stabilized (Ult..
Tensile Strength at Break	80.0 MPa	11600 psi	MD
BASF Ultramid® C33 LN 0.025 mm Blown Film PA6/66 Description: Ultramid® C33 LN is a copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion..
Tensile Strength at Break	80.0 MPa	11600 psi	Conditioned; ISO R 527
Addiplast Addinyl B2I V25 Flame Retardant Nylon 6, 25% Glass Filled Flame retardant, 25% glass fiber reinforced, halogen freeInformation provided by Addiplast.
Tensile Strength at Break	80.0 MPa @Temperature 130 - 150 °C, Time 7.20e+7 sec	11600 psi @Temperature 266 - 302 °F, Time 20000 hour	5 [mm/min], 50% Loss of Tensile Strength; ICE 216
Akro-Plastic Akromid® A3 GF 20 (2419) PA 6.6 Dry, 20% Glass Filled AKROMID® A (Polyamide 6.6) is an engineering compound, characterized by high mechanical strength, stiffness and thermal resistance. Furthermore, this polyamide offers high toughness at low temperat..
Tensile Strength at Break	80.0 MPa	11600 psi	0.2 in/min; ASTM Test
BASF Ultramid® C33 01 PA66/6 (Dry) Ultramid C33 01 is an intermediate viscosity PA6/66 grade. Its lower melting point than standard PA6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. It conforms to F..