SABIC Innovative Plastics NORYL GFN2V PPE+HIPS (Europe-Africa-Middle East)

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polystyrene (PS)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Noryl
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics NORYL GFN2V PPE+HIPS (Europe-Africa-Middle East).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

NORYL GFN2V is a 20 % glass fibre reinforced material with a HDT/A of 130C according ISO 75. NORYL GFN2V cust spec 1977 has been approved for potable water applications up to 85C by the UK WFBS according BS 6920 in limited colours.

Physical Properties	Metric	English	Comments
Density	1.25 g/cc	0.0452 lb/inÂ³	ISO 1183
Moisture Absorption	0.0600 %	0.0600 %	23Â°C / 50% RH; ISO 62
Water Absorption at Saturation	0.20 %	0.20 %	ISO 62
Linear Mold Shrinkage, Flow	0.0020 - 0.0040 cm/cm	0.0020 - 0.0040 in/in	on Tensile Bar; SABIC Method
Melt Index of Compound	15 g/10 min @Load 10.0 kg, Temperature 280 Â°C	15 g/10 min @Load 22.0 lb, Temperature 536 Â°F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, H358/30	100 MPa	14500 psi	ISO 2039-1
Tensile Strength at Break	80.0 MPa	11600 psi	5 mm/min; ISO 527
Elongation at Break	2.5 %	2.5 %	5 mm/min; ISO 527
Tensile Modulus	6.00 GPa	870 ksi	1 mm/min; ISO 527
Flexural Strength	120 MPa	17400 psi	2 mm/min; ISO 178
Flexural Modulus	4.50 GPa	653 ksi	2 mm/min; ISO 178
Izod Impact, Unnotched (ISO)	23.0 kJ/mÂ²	10.9 ft-lb/inÂ²	80104; ISO 180/1U
	23.0 kJ/mÂ² @Temperature -30.0 Â°C	10.9 ft-lb/inÂ² @Temperature -22.0 Â°F	80104; ISO 180/1U
Charpy Impact Unnotched	2.50 J/cmÂ²	11.9 ft-lb/inÂ²	Edgew 80104 sp=62mm; ISO 179/1eU
	2.50 J/cmÂ² @Temperature -30.0 Â°C	11.9 ft-lb/inÂ² @Temperature -22.0 Â°F	Edgew 80104 sp=62mm; ISO 179/1eU
Taber Abrasion, mg/1000 Cycles	60	60	CS-17, 1 kg; SABIC Method

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	30.0 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	16.7 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-2
CTE, linear, Transverse to Flow	70.0 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	38.9 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-2
Thermal Conductivity	0.260 W/m-K	1.80 BTU-in/hr-ftÂ²-Â°F	ISO 8302
Deflection Temperature at 0.46 MPa (66 psi)	130 Â°C	266 Â°F	Edgew 120104 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)	120 Â°C	248 Â°F	Edgew 120104 sp=100mm; ISO 75/Ae
Vicat Softening Point	135 Â°C	275 Â°F	Rate B/50; ISO 306
	140 Â°C	284 Â°F	Rate B/120; ISO 306
	145 Â°C	293 Â°F	Rate A/50; ISO 306
UL RTI, Electrical	50.0 Â°C	122 Â°F	UL 746B
UL RTI, Mechanical with Impact	50.0 Â°C	122 Â°F	UL 746B
UL RTI, Mechanical without Impact	50.0 Â°C	122 Â°F	UL 746B
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	UL 94
Oxygen Index	26 %	26 %	ISO 4589
Glow Wire Test	750 Â°C @Thickness 3.20 mm	1380 Â°F @Thickness 0.126 in	IEC 60695-2-12

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	ROA; IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	IEC 60250
	2.9 @Frequency 50.0 - 60.0 Hz	2.9 @Frequency 50.0 - 60.0 Hz	IEC 60250
Dielectric Strength	18.0 kV/mm @Thickness 3.20 mm	457 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
Dissipation Factor	0.00080 @Frequency 50.0 - 60.0 Hz	0.00080 @Frequency 50.0 - 60.0 Hz	IEC 60250
	0.0030 @Frequency 1.00e+6 Hz	0.0030 @Frequency 1.00e+6 Hz	IEC 60250

Descriptive Properties	Value	Comments
Ball Pressure Test, 125Â°C +/- 2Â°C	PASSES	IEC 60695-10-2

Users viewing this material also viewed the following: