- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PVDF
- Quadrant EPP Symalit® PVDF (ASTM Product Data Sheet)
Quadrant EPP Symalit® PVDF (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Fluoropolymer , PVDF |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Symalit® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Symalit® PVDF (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.78 g/cc | 1.78 g/cc | ASTM D792 |
| Water Absorption | 0.030 % | 0.030 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.050 % | 0.050 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 75 | 75 | ASTM D785 |
| Hardness, Shore D | 78 | 78 | ASTM D2240 |
| Tensile Strength | 48.3 MPa | 7000 psi | ASTM D638 |
| Elongation at Break | 100 % | 100 % | ASTM D638 |
| Tensile Modulus | 2.07 GPa | 300 ksi | ASTM D638 |
| Flexural Strength | 55.2 MPa | 8000 psi | ASTM D790 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ASTM D790 |
| Compressive Strength | 68.9 MPa | 10000 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 1.10 GPa | 160 ksi | ASTM D695 |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 Type A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 119 µm/m-°C @Temperature -40.0 - 149 °C |
66.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.216 W/m-K | 1.50 BTU-in/hr-ft²-°F | ASTM F433 |
| Melting Point | 171 °C | 340 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 149 °C | 300 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 110 °C | 230 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 6.4 @Frequency 1e+6 Hz |
6.4 @Frequency 1e+6 Hz |
ASTM D150 |
| Dielectric Strength | 10.2 kV/mm | 260 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.165 @Frequency 1e+6 Hz |
0.165 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | Yes | Yes | |
| Canada AG | No | No | |
| FDA | Yes | Yes | |
| NSF | Yes | Yes | |
| USDA | Yes | Yes | |
| USP Class VI | Yes | Yes |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Limited | Limited | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Natural | |
| Machinability | 3 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved