Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Ritelok PS65 General Purpose Pipe Sealant Anaerobic. Pipe sealant for coarse threads. PS65 withstands temperatures from 65°F to 300°F (55°C-150°C), dismantled using normal tools |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
ND Industries 440 High pressure Sealant Pneumatic and hydraulic sealant fluid, for power and gas system connections |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
ND Industries ScrewGrade® 111 Removable Threadlocker A low strength threadlocker which eliminates vibrational loosening, and seals against leakage and corrosion.Typical Usessoft metal fasteners, precision screws, and locking fasteners smaller than .25.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
ND Industries StudGrade® 140 Permanent Threadlocker General DescriptionHigh strength threadlockers for maximum security. Suitable for most applications where disassembly is not required.Typical Usesstuds and bolts, and threaded pipe fittings.Meets m.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Quadrant EPP Quadrant PPSU LSG PPSU, Extruded, Unfilled, Polyphenylsulfone (ASTM Product Data Sheet) |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Quantum Polysulfone Information provided by Quantum Advanced Engineering Plastics |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | continuous |
Lucas-Milhaupt Silvabraze 33830 Brazing Alloy Silvabraze is used for brazing of copper and copper alloys, brass and bronze. It can also be used on silver, tungsten, and molybdenum. It is primarily used for the joining of copper-to-copper on vib.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | continuous |
Lucas-Milhaupt Silvaloy® 2M Brazing Alloy Silvaloy 2M is used for the brazing of copper and copper alloys, brass and bronze. It can also be used on silver, tungsten and molybdenum. It is primarily used for the joining of copper-to-copper on.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Henkel Hysol EA 9895 WPP Peel Ply Pre-impregnated, polyester peel ply product supplied in film form. Specially designed resin system capable of curing at 350°F / 177°C. Compatible with state-of-the-art composite prepreg resin .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Henkel Hysol Benzoxazine 99900 Infusion Resin Binder Binder for use with infusion resin. Use for compaction and preforming of reinforcement. Increases interlaminar toughness |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Master Bond UV15LV One Component, UV Curable Epoxy Based System Product Description: Master Bond UV15LV is a high strength, low viscosity, epoxy based UV curable system for bonding, sealing and coating. It has low viscosity and it is widely used in a variety of .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Master Bond UV24TKLO One Component, UV-Curable, Low Outgassing Adhesive System Master Bond Polymer System UV24TKLO is a one part UV curable epoxy modified formulation for bonding, sealing and encapsulation. It passes the rigorous requirements for low outgassing as per ASTM E-5.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Loctite® 3492 Acrylic Light Cure Adhesive Acrylic Light Cure AdhesivesVersatile Loctite® ultraviolet (UV) and visible light curing adhesives can be used in bonding, encapsulating, coating, tacking, and sealing applications. These single co.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Hexcel® HexWeb® HRH-10/F50 - 4.5 Nonmetallic Flex-Core Honeycomb Designation: Material/Cell Size (cells per lineal foot in W direction)-DensityHexcel manufactures two types of nonmetallic reinforced plastic HexWeb Flex-Core: HexWeb HRP - Fiberglasses cloth reinfo.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Loctite® 542 Fine Threads Thread Sealant Thread SealersLoctite® Liquid Thread Sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts, and hardening to prevent leakage. Designed for low and high p.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Loctite® 635 High Strength/Slow Cure Retaining Compound RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | Operating Temperature |
Devcon Wear Guard (Fine Load) Epoxy Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
DuPont Teijin Films Mylar® A Polyester Film, 92 Gauge Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
DuPont Teijin Films Mylar® MDA Polyester Film, 500 Gauge Mylar® MDA films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Abatron L060330-2 Flexible Polyurea Compound L060330-2 is used for castings, repairs, assemblies, coatings, and laminations that require fast hardening. It is also used for bonding most rigid materials such as metals, aluminum, copper, china, .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
3M 4380 General Purpose Aluminum Foil Tape 3M™ Aluminum Foil Tape 4380 is a general purpose aluminum foil tape offering a dead soft aluminum foil backing combined with an acrylic pressure sensitive adhesive.Information provided by 3M |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | Service |
3M 7909 Screen Printable Sheet Polyester Label Material 3M™ Screen Printable Sheet Polyester Label Materials are durable, high performance materials that offer excellent thermal stability, moisture resistance and chemical resistance. These materials uti.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
3M 93020LE High Strength Double Coated Tape with Adhesive 300LSE 3M ™ Double Coated Tapes with 3M™ Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acryl.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | Short term |
3M 9496LE High Strength Double Coated Tape with Adhesives 300LSE and 200MP 3M™ Double Coated Tape 9496LE with 3M™ Low Surface Energy Acrylic Adhesive 300LSE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Aremco Corr-Paint™ CP2070 High Temperature Protective Coating Novolac-Epoxy, Pigment Only Filled Two part, novolac-epoxy with exceptional abrasion adn corrosion resistance for continuous operations to 300°F (150°C) and intermittent use to 400°F (204°C). |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Loctite® 661 Retaining Compound RetainersLoctite Corporation, the pioneer of anaerobic adhesives, has applied this technology to create retaining compounds that increase the shear strength of cylindrical, non-threaded assemblies. .. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | |
Henkel Hysol EA 9686 Film Adhesive Second generation, moisture resistant, toughened 250°F / 121°C curing film with service performance to 300°F / 149°C. Excellent for composite or metal bonding. Data from .060 psf, 300 g / m2.App.. |
|||
Maximum Service Temperature, Air | 149 °C | 300 °F | See Note 2. |
ChevronTexaco Crater® CSF Texaco Crater lubricants delivers value through:Low environmental impact — Contains a carrier solvent that is a non-ozone depleting diluent.Good water resistance — Strong resistance to water washo.. |