- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- Network Polymers NPP 50-0753
Network Polymers NPP 50-0753
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | Network Polymers |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Network Polymers NPP 50-0753.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
| Melt Flow | 7.0 g/10 min @Load 2.16 kg, Temperature 190 °C |
7.0 g/10 min @Load 4.76 lb, Temperature 374 °F |
Procedure A Condition E; ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 30.0 MPa | 4350 psi | chs 2 in/min; ASTM D638 |
| Elongation at Break | 950 % | 950 % | ASTM D638 |
| Flexural Modulus | 1.24 GPa | 180 ksi | Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | <= -76.1 °C | <= -105 °F | ASTM D746 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable WA9001 Polyvinyl Chloride, Flexible (PVC, Flexible)
- MV Labs MN300 MnCO3 Manganese(II) carbonate
- Lehmann & Voss LUVOCOM® 1105-8158 PEEK, with mineral filler
- LG Chemical LUPOY MP5000AM PC/ABS
- A. Schulman POLYFORT™ FPP 1427 Mineral Filled Copolymer Polypropylene
- A. Schulman POLYBATCH™ Red 5670 Concentrate Based In Polyethylene
- Total HDPE 56020 S XP High Density Polyethylene - Blow Molding
- 3M Dyneon™ FC 2173 Fluoroelastomer (discontinued **)
Copyright © lookpolymers.com All Rights Reserved