Polymer Property : Flexural Modulus = 1.24 GPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Flexural Modulus	1.24 GPa	180 ksi	Tangent; ASTM D790
RheTech Products FT4802-01UV Thermoplastic Polyolefin, UV Stabilized, Black Applications: Bodyside moldings and claddingsFacia and bumper coversInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.24 GPa	180 ksi	Tangent; ASTM D790
RheTech Products FT4802-690UV Thermoplastic Polyolefin, UV Stabilized, HS5 Medium Dark Neutral Applications: Bodyside moldings and claddingsFacia and bumper coversExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products.
Flexural Modulus	1.24 GPa	180 ksi	Test Method I, Procedure B (chs speed 0.05 in/min); ASTM D790
Network Polymers NPP 50-1052 Description: High Density Polyethylene (HDPE)Information provided by Network Polymers Inc.
Flexural Modulus	>= 1.24 GPa	>= 180 ksi	ASTM D790
Niche Polymer PPHM15BK Homopolymer PP Information provided by Niche Polymer
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
Quadrant EPP Proteus® PP, Black Homopolymer Polypropylene (ASTM Product Data Sheet) High impact resistance strength Better resistance to cracking at low temperatures than Homopolymer Polypropylene More pliable than homopolymer Meets food handling guidelines Chemical- and corrosion..
Flexural Modulus	1.24 GPa	180 ksi	0.05 in/min; 1% secant; Procedure A; ASTM D790
Phillips 66 COPYLENE® CH085 Polypropylene, Homopolymer, Cast Film COPYLENE™ CH085, a controlled rheology polypropylene homopolymer resin, is used in injection molding and cast film extrusion applications. Applications: Bags & Pouches, Stationery Film, Stretch Wra..
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790A
BP Amoco Acctuf® 3243 Impact Copolymer Polypropylene (discontinued **) Suggested fabrication methods: Injection moldingFeatures: General purposeComplies with FDA specification, Title 21, CFR 177.1520.Typical property data below from injection molded samples.
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
Techmer ES HiFillÂ® HDPE TM25 25% Talc Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Talc Filler, 25% Filler by WeightInformation provided by TP Composites, Inc.
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
A. Schulman POLYTROPE™ TPP 518 Injection Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 518 is an injection grade olefinic thermoplastic elastomer. This mineral filled product is recommended for applications requiring high stiffness and low thermal expansion i..
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
A. Schulman PP 3052X-01 Polypropylene Impact Resistant Copolymer DescriptionPolypropylene PP 3052X-01 is an extra high flow impact resistant copolymer with relatively high stiffness. Information provided by A. Schulman.
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790-92
Lubrizol Stat-Rite® M-690 Static Control PETG Alloy Stat-Rite® M-690 is a static dissipative PETG alloy. Stat-Rite® M-690 utilizes the patented Stat-Rite® inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protectio..
Flexural Modulus	1.24 GPa	180 ksi	5 mm/min, tangent; ASTM D790
A. Schulman PP 1621 Polypropylene Low Flow Homopolymer Polypropylene DescriptionPolypropylene PP 1621 is a low flow homopolymer polypropylene primarily used for sheet strapping and profile extrusion applications.ApplicationPP 1621 meets FDA Regulation 21 CFR 177.1520..
Flexural Modulus	1.24 GPa	180 ksi	1.3mm per min, 1% secant; ASTM D790
Formosa Plastics Formolene® 4100P Injection Molding Polypropylene Homopolymer with ESCR AdditivesApplications: Closures, small appliances, housewares and toys.Formolene 4100P is a low viscosity, highly isotactic polypropylene homopolymer designed for various injec..
Flexural Modulus	1.24 GPa	180 ksi	5 mm/min, tangent; ASTM D790
A. Schulman PP 1621 Polypropylene Low Flow Homopolymer Polypropylene DescriptionPolypropylene PP 1621 is a low flow homopolymer polypropylene primarily used for sheet strapping and profile extrusion applications.ApplicationPP 1621 meets FDA Regulation 21 CFR 177.1520..
Flexural Modulus	1.24 GPa	180 ksi	3 pt. Tangent; ASTM D790
Chevron Phillips Marlex® 9012 HDPE Injection Molding Resin Resin Type: Linear Copolymer, ASTM D 4976 Classification: PE 232, A 55600Characteristics: Good Flow, Good Impact Strength, Good Stiffness, Good ESCR, Good Shrinkage ResistanceApplications:Food Pails..
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790A
Dow 5D49 Polypropylene Homopolymer Resin OverviewConsistent processabilitySuperior spinning characteristicsComplies with U.S. FDA 21 CFR 177.1520 (c)1.1aDOW 5D49 Polypropylene Resin is intended for use in fiber spinning processes. It is w..
Flexural Modulus	1.24 GPa	180 ksi	0.05 in/min, 1% secant; ASTM D-790A
Braskem TI4020N Impact Copolymer Polypropylene Description: Extra High Izod Impact, Very Good Low Temperature Drop Impact, Good Organoleptic Properties, NucleatedApplications: Suggested Uses Include Thermoforming, Food Packaging, Dairy Container..
Flexural Modulus	>= 1.24 GPa	>= 180 ksi	ASTM D790
Buckeye Polymers BP RPPC 2010 CW Polypropylene, Calcium Filled Product Information: Calcium Carbonate Filled PP Grades have a high impact toughness, moderate increased stiffness, and excel in high gloss applications. Our BP RPP C series product line ranges fro..
Flexural Modulus	1.24 GPa	180 ksi	Secant @ 1% strain; ASTM D790
Bapolene® PP5062 Polypropylene, Injection Grade Polypropylene injection impact copolymer with excellent color and processability. This resin offers a superior balance of stiffness and impact strength. This product meets the FDA requirements of ..
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
A. Schulman PP 3052X-01 Polypropylene Impact Resistant Copolymer DescriptionPolypropylene PP 3052X-01 is an extra high flow impact resistant copolymer with relatively high stiffness. Information provided by A. Schulman.
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790
Albis Plastics Cellulose Acetate CA700 , Unreinforced, 37% Plasticizer (discontinued **) Amorphous Cellulose Acetate (CA)Characteristics: Chemical Resistance, Toughness, Strength, Hardness, Gloss, Clarity and "Feel"Applications: Tool Handles, Optical Products, Toys and Sheet ProductsPro..
Flexural Modulus	1.24 GPa	180 ksi	ASTM D790-92
Lubrizol Stat-Rite® SIS535 Static Control System Product Description: Stat-Rite® SIS535 is a static dissipative HIPS alloy. Stat-Rite SIS535 utilizes the patented Stat-Rite inherently dissipative polymer (IDP) alloy system to provide clean, perma..
Flexural Modulus	1.24 GPa	180 ksi	1% Secant; ASTM D790
LyondellBasell Alathon® 9301 High Density Polyethylene ApplicationsALATHON 9301is a high density resin designed for sheet extrusion and thermoforming. It exhibits very low sag and high stiffness.Regulatory StatusALATHON 9301 meets the requirements of F..