Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Devcon Wear Guard (High Temp) Epoxy

Category Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive
Manufacturer Devcon
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Devcon Wear Guard (High Temp) Epoxy.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Abrasion-Resistant SystemComments: PuttyData provided by Ellsworth Adhesives.
Physical Properties Metric English Comments
Density 1.83 g/cc
0.0662 lb/in³
Mechanical Properties Metric English Comments
Hardness, Shore D 87
87
ASTM D2240
Tensile Strength, Ultimate 31.7 MPa
4600 psi
ASTM D638
Modulus of Elasticity 5.86 GPa
850 ksi
In Tension; ASTM D638
Flexural Yield Strength 56.7 MPa
8220 psi
ASTM D790
Compressive Yield Strength 91.0 MPa
13200 psi
ASTM D695
Adhesive Bond Strength 15.9 MPa
2300 psi
Adhesive tensile shear strength; ASTM D1002
Thermal Properties Metric English Comments
CTE, linear 49.0 µm/m-°C

@Temperature 20.0 °C
 27.2 µin/in-°F

@Temperature 68.0 °F
 ASTM D696
Thermal Conductivity 0.895 W/m-K
6.20 BTU-in/hr-ft²-°F
ASTM C177
Maximum Service Temperature, Air 232 °C
450 °F
Operating Temperature
Shrinkage 0.10 %
0.10 %
During Cure; ASTM D2566
Electrical Properties Metric English Comments
Dielectric Constant 38
38
ASTM D150
Dielectric Strength 12.2 kV/mm
310 kV/in
ASTM D149
Processing Properties Metric English Comments
Processing Temperature 21.1 °C
70.0 °F
Pot Life 120 min

@Temperature 23.9 °C
 120 min

@Temperature 75.0 °F
Descriptive Properties Value Comments
Coverage per lb. 60 in²
at 1/4 inch thick
Mix Ratio by Volume 6 to 1
resin:hardener
Mix Ratio By Weight 13.7 to 1
resin:hardener
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved