Chevron Phillips HiD® 9720 HDPE Injection Molding Resin (discontinued **)

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Chevron Phillips HiD® 9720 HDPE Injection Molding Resin (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Resin Type: linear homopolymerCharacteristics: good flow, moderate impact strength, excellent stiffness, moderate ESCR, moderate shrinkage resistanceApplications: pails, structural foamInformation provided by Chevron Phillips Chemical Company.

Physical Properties	Metric	English	Comments
Density	0.962 g/cc	0.0348 lb/in³	ASTM D4883
Apparent Bulk Density	0.590 g/cc	0.0213 lb/in³	ASTM D1895
Melt Flow	20 g/10 min @Load 2.16 kg, Temperature 190 °C	20 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	63	63	ASTM D2240
Tensile Strength, Yield	43.0 MPa	6240 psi	ASTM D638
Elongation at Break	20 %	20 %	ASTM D638
Flexural Modulus	1.814 GPa	263.1 ksi	1% Secant; ASTM D 790
Izod Impact, Notched	0.320 J/cm	0.599 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	73.0 °C	163 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	50.0 °C	122 °F	ASTM D648
Vicat Softening Point	127 °C	261 °F	ASTM D1525
Brittleness Temperature	<= -60.0 °C	<= -76.0 °F	ASTM D746

Users viewing this material also viewed the following: