Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.600 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
RheTech Products FRP257-01 32% Talc Reinforced Polypropylene Copolymer, Flame Retardant, Black Applications: Electrical component housingsConsumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.600 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
RheTech Products T20P250-01UV 20% Talc Reinforced Polypropylene Copolymer, UV Stabilized, Black Applications: Interior componentsI/P componentsInterior trimDurable goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.600 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
RheTech Products HP525-01 30% Talc Reinforced High Performance Polypropylene, UV Stabilized, Black Applications: Center consolesInterior trimInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Izod Impact, Notched | 0.320 - 4.50 J/cm | 0.599 - 8.43 ft-lb/in | Average value: 0.658 J/cm Grade Count:44 |
Overview of materials for Acetal Copolymer, Carbon Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, Carbon Fiber Filled". Each property range of values reported is minimum and maximum va.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
Chevron Phillips HiD® 9720 HDPE Injection Molding Resin
(discontinued **) Resin Type: linear homopolymerCharacteristics: good flow, moderate impact strength, excellent stiffness, moderate ESCR, moderate shrinkage resistanceApplications: pails, structural foamInformation p.. |
|||
Izod Impact, Notched | 0.320 - 2.40 J/cm | 0.600 - 4.50 ft-lb/in | Average value: 0.882 J/cm Grade Count:64 |
Overview of materials for Nylon 66, Carbon Fiber/PTFE Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, Carbon Fiber/PTFE Filled". Each property range of values reported is minimum and maximum value.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP KL005 Acetal Copolymer LNP LUBRICOMP* KL005 is a compound based on Acetal Copolymer resin containing 25% PTFE. Added feature of this material is: Wear Resistant. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRICOMP RA004 PA 66 (Asia Pacific) LNP LUBRICOMP* RA004 is a compound based on Nylon 66 resin containing Aramid. Added features of this material include: Internally Lubricated. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics ULTEM 9011 PEI Transparent, high flow Polyetherimide (Tg 217C). ECO Conforming. Improved processability for Fiber extrusion. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP LUBRILOY UA200A PPA LNP LUBRILOY* UA200A is a compound based on Polyphthalamide resin containing Aramid Fiber, Proprietary Lubricant. Added feature of this material is: Wear Resistant. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics ULTEM EXUM0169 PEI Blend Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics ULTEM EXUM0169 PEI Blend (Asia Pacific) Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics Valox® 457 PBT (Asia Pacific) 6.5% GR PBT, UL94 V-0/5V. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP THERMOCOMP RB008 PA 66 (Asia Pacific) LNP THERMOCOMP* RB008 is a compound based on Nylon 66 resin containing Glass Bead. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics ULTEM AUT200 PEI Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperat.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
SABIC Innovative Plastics LNP THERMOCOMP RB006 PA 66 (Asia Pacific) LNP* Thermocomp* RB006 is a compound based on Nylon 66 resin containing Glass Bead. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
A. Schulman PP 3466-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3466-01 is a homopolymer polypropylene with the addition of antistatic. This product enhances processing with fast cycle times in injection molding.ApplicationPP 3466-01.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
A. Schulman PP 3466-01 Polypropylene Homopolymer Polypropylene DescriptionPolypropylene PP 3466-01 is a homopolymer polypropylene with the addition of antistatic. This product enhances processing with fast cycle times in injection molding.ApplicationPP 3466-01.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
A. Schulman POLYFLAM™ FPP 1006S Talc Filled Homopolymer Polypropylene DescriptionPolyfort® FPP 1006S is a 20% talc filled homopolymer polypropylene compound formulated with an internal mold release. Information provided by A. Schulman. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 22.8 °C |
0.600 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
Clariant Renol R66G13HSL Nylon 66, 13% Glass Fiber, Heat Stabilized, Lubricated, Economy Data provided by Clariant Masterbatches |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.599 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
3D Systems DuraForm® PA Nylon for SLS® Systems For use with all selective laser sintering (SLS®) systems.ApplicationsComplex, thin-wall ductworkMotorsportsAerospaceHousings and enclosuresImpellers and connectorsConsumer sporting goodsVehicle da.. |
|||
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
Chang Chun Plastic Longlite PM T310 Impact Phenolic Molding Compound ASTM Grade per ASTM D700 is 13.Information provided by Dowell Trading Company Ltd. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 22.8 °C |
0.600 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
Amco PRIMATOP PP HOMO 120NA-HF Multi-Purpose Polypropylene Features:medium viscosityexcellent processabilitygood stiffnessnucleationanti-statApplications:closuresthin wall applicationshousewaresFormer A-Top Polymers product; part of Amco product line since .. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.600 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
RheTech Products CC40P100-01 40% Calcium Carbonate Reinforced Polypropylene, Black Applications: Consumer goodsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Izod Impact, Notched | 0.320 J/cm @Temperature 23.0 °C |
0.599 ft-lb/in @Temperature 73.4 °F |
ASTM D256 |
Braskem H 501HC Thermoforming Polypropylene Homopolymer High-stiffness thermoformed parts.Information provided by Braskem. |