Polymer Property : Density = 0.962 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
NOVA Chemicals Sclair® 19A Homopolymer HDPE Film Resin Film Properties.Data provided by the manufacturer.
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
NOVA Chemicals Sclair® 2909 HDPE Injection Molding Resin High stiffness, Maximum impact strength and toughness, Good top loading capability, High surface glossApplications: Tote boxes, Beverage cratesAdditives: Antioxidant, Ultraviolet light stabilizersIn..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
NOVA Chemicals Sclair® 59A HDPE Injection Molding Resin Features: Homopolymer, high drop impact resistance and high stiffness.Applications: Juice, water containers, personal protective equipment, grain elevator buckets, designed for accumulator and recip..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips HiD® 9605D HDPE Cast Film Resin (discontinued **) Characteristics: Very Low Gel Levels, Produces Very "Clear" Film, Draws to Thin Gauges, Low Taste and Odor Transfer, Excellent MVTR for a Chill Cast Film, Excellent Processability, Excellent Optical..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips HiD® 9607D HDPE Cast Film Resin (discontinued **) Characteristics: Very Low Gel Levels, Produces Very "Clear" Film, Draws to Thin Gauges, Low Taste and Odor Transfer, Excellent MVTR for a Chill Cast Film, Excellent Processability, Excellent Optical..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips HiD® 9662 HDPE Blown Film Resin (discontinued **) Resin Type: Linear Polyethylene HomopolymerCharacteristics: Unique Molecular Architecture Gives Outstanding Moisture Barrier Properties, Excellent Film Strength and Toughness for a Homopolymer, Give..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D4883
Chevron Phillips HiD® 9720 HDPE Injection Molding Resin (discontinued **) Resin Type: linear homopolymerCharacteristics: good flow, moderate impact strength, excellent stiffness, moderate ESCR, moderate shrinkage resistanceApplications: pails, structural foamInformation p..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
NOVA Chemicals Sclair® 69A HDPE Extrusion Resin (discontinued **) Features: High tensile strength, better moisture barrier, better oil and solvent resistance, lower friction coefficient, lower brittleness temperature, better abrasion resistance, better temperature..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
Entec Hypel® PEHD.8/.962 HDPE (discontinued **) Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ente..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D 792
Total Finathene® 6450 HDPE film (discontinued **) Applications: overwrap, food packaging, coextrusion, extrusion coatingInformation provided provided by Total Petrochemicals.Total Petrochemicals includes former Fina and Atofina plastics product lin..
Density	0.962 - 1.54 g/cc	0.0348 - 0.0555 lb/in³	Average value: 1.29 g/cc Grade Count:107
Overview of materials for Polycarbonate/ABS Alloy, Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/ABS Alloy, Glass Fiber Filled". Each property range of values reported is minimum and maxi..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D 792
NOVA Chemicals Sclair® 99K Homopolymer HDPE Film Resin 99K complies with the U.S. FDA specifications for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food, without te..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Braskem BT 003 HDPE Blow Molding Polyethylene (discontinued **) Applications: Bottles for food products, lubricating and cooking oil; toys; bottler for surface-active agents; sheets. Information provided by Braskem
Density	0.962 g/cc	0.0348 lb/inÂ³	ASTM D1505
Global J-2208 High Density Polyethylene Description-industrial injection grade w/ UV stabilizer, good for high impact strengthApplications-high quality industrial products, outdoor applications such as pallets & cratesInformation provided..
Density	0.962 g/cc	0.0348 lb/inÂ³	ASTM D1505
Global J-2308 High Density Polyethylene Description-industrial injection grade w/ UV stabilizer, good for high impact strengthApplications-high quality industrial products, outdoor applications such as pallets & cratesInformation provided..
Density	0.962 g/cc	0.0348 lb/inÂ³	ASTM D4883
Ineos G60-25-144 HDPE Ineos G60-25-144 is a high density polyethylene homopolymer typically used in the production of sheet extrusion and blow molded containers. This material meets the Food and Drug Administration requ..
Density	0.962 g/cc	0.0348 lb/inÂ³	ASTM D792
IRPC Polimaxx Polene G2865 High Density Polyethylene CHARACTERISTICS: HIGH STIFFNESS, GOOD IMPACT STRENGTH, GOOD PROCESSABILITYAPPLICATIONS: BLOW MOLDING FOR CONTAINERS FROM A FEW ml TO ABOUT 20 LITRES, DIARY PRODUCT BOTTLES, FRUIT JUICE BOTTLES, ONE-..
Density	0.962 g/cc	0.0348 lb/inÂ³	ASTM D1505
LyondellBasell PetrotheneÂ® LB832001 High Density Polyethylene ApplicationsPETROTHENE LB 8320-00 resin is designed for sheet extrusion, vacuum forming and thermoforming. This resin exhibits very low sag, high stiffness.Regulatory StatusLB 8320-00 meets the req..
Density	0.962 g/cc	0.0348 lb/in³	ISO 1183
Borealis CG9620 High Density Polyethylene CG9620 is a high density polyethylene film grade which combine excellent extrusion behavior with superior mechanical properties. Applications: CG9620 is recommended for coated film and co-extrusion..
Density	0.962 g/cc	0.0348 lb/in³	ISO 1183
Borealis MG9621B Polyethylene Applications: crates, and pailsInformation provided by Borealis AG
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips MarFlex® 9659 HDPE Blown Film Resin Resin Type: Linear Polyethylene HomopolymerCharacteristics: Unique Molecular Architecture Gives Outstanding Moisture Barrier Properties, Excellent Film Strength and Toughness for a Homopolymer, Give..
Density	0.962 - 0.971 g/cc	0.0348 - 0.0351 lb/in³	ASTM D4052
ExxonMobil Jayflex™ DIDP Plasticizer (Asian Grade) Availability: Asia PacificCAS Number: 68515-49-1Information provided by ExxonMobil
Density	0.962 g/cc	0.0348 lb/in³	ASTM D792
Dow AMPLIFY™ GR 205 Maleic anhydride grafted (MAH) polymer AMPLIFY™ GR 205 Functional Polymer is designed as a blend component for unmodified polyethylene. In tie layers for flexible packaging, it promotes adhesion of polyethylene to barrier polymers such..
Density	0.962 g/cc	0.0348 lb/in³
Dow DOWLEX™ IP-10 High Density Polyethylene Next Generation DOWLEX® IP-10 resin is a high density polyethylene resin specifically designed for reusable case applications including, poultry, fast food, automotive, retail, fresh produce, bever..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips Marlex® 9708 HDPE Injection Molding Resin Resin Type: Linear Homopolymer; ASTM D 4976 Classification: PE 243, A 63700Characteristics: Moderate Flow, Good Impact Strength, Excellent Stiffness, Good ESCR, Moderate Shrinkage ResistanceApplicat..
Density	0.962 g/cc	0.0348 lb/in³
Dow HDPE 10462N High Density Polyethylene DOW HDPE 10462N resin is a narrow molecular weight distribution polymer designed to offer good stress crack resistance and impact strength with excellent rigidity. This resin has good processability..
Density	0.962 g/cc	0.0348 lb/in³
Abatron AboCoat 8006-3/8606-3 Clear Versatile Epoxy Clear epoxy protective and dielectric coatings. For spraying, brushing or rolling on metal, concrete, masonry, wood, fiberglass and most surfaces. Good adhesion, flexibility, hardness, water and c..
Density	0.962 g/cc	0.0348 lb/in³
BASF Isopropanolamine Formula: C3H9NOCAS: 78-96-6Description: Isopropanolamine is a colorless to yellowish liquid with an amine-like odor. It is miscible in water.Synonyms: 1-Amino-2-propanol, Monoisopropanolamin, 1-Ami..
Density	0.962 g/cc	0.0348 lb/in³	ASTM D1505
Chevron Phillips Marlex® HMN 6060 Polyethylene, Injection Molding Grade, HDPE (discontinued **) Meets FDA Regulation 177.1520.Data provided by the manufacturer