- HOME
- POLYMER SEARCH
- Electronic/Magnetic Alloy
- California Fine Wire Stablohm 650 Nickel Chromium Resistance Wire
California Fine Wire Stablohm 650 Nickel Chromium Resistance Wire
| Category | Metal , Electronic/Magnetic Alloy , Nonferrous Metal , Nickel Alloy |
| Manufacturer | California Fine Wire |
| Trade Name | Stablohm |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | California Fine Wire Stablohm 650 Nickel Chromium Resistance Wire.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
All values may vary dependent on specific design and usageCapabilities: WireRibbonSquareInsulatedPlatedInformation provided by California Fine Wire.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.41 g/cc | 0.304 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 689 MPa | 100000 psi | Annealed |
| 1210 MPa | 175000 psi | Stress relieved | |
| 1380 MPa | 200000 psi | Hard |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 14.5 µm/m-°C @Temperature 20.0 °C |
8.06 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 11.3 W/m-K | 78.4 BTU-in/hr-ft²-°F | |
| Melting Point | 1395 °C | 2543 °F | |
| Maximum Service Temperature, Air | 1100 °C | 2010 °F | Operating Temperature |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Chromium, Cr | 20 % | 20 % | |
| Nickel, Ni | 80 % | 80 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.000108 ohm-cm | 0.000108 ohm-cm | 3% tolerance on sizes below 0.02, 5% tolerance on sizes above 0.02 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Magnetic | None | |
| Temperature Coefficient of Resistance | 0.000085 ohms/ohm-°C | 0-100°C |
| Thermal EMF vs. Copper | +0.006 |
Users viewing this material also viewed the following:
- Huntsman IROGRAN® A 65 P 4324 N TPU-Polyether
- Polyram RamLloy B001 Nylon 6/Polyolefin Alloy, Impact Modified
- Dow HDPE 12450N High Density Polyethylene
- Eurostar Starglas GX05052 PSU, Glass Fiber Filled
- Eurotec® Tecomid® NB30 BK EF PA6, unfilled, black, suitable for electrostatic powder coating
- Braskem F7018 LDPE Injection Molding Polyethylene
- Ascend Performance Materials Vydyne® 909 Nylon 66/6, 25% Glass Reinforced, Ignition Resistant, Conditioned
- Ascend Performance Materials Vydyne® R525 Nylon 66, 25% Glass Reinforced, DAM
- RheTech Products HP507-01 38% Talc Reinforced High Performance Polypropylene, Non-UV Stabilized, Black
Copyright © lookpolymers.com All Rights Reserved