Processing Properties | Metric | English | Comments |
---|---|---|---|
Drying Temperature | 85.0 °C @Time 14400 sec |
185 °F @Time 4.00 hour |
|
PlastiComp Complet® LCF50 - PA6 Nylon 6, 50% Long Carbon Fiber Reinforced Complet® long-fiber reinforced pellets are manufactured to exceed expectation for quality and performance.Nylon 6 with 50% carbon fiber reinforcementInformation provided by PlastiComp, Inc. |
|||
Drying Temperature | 85.0 °C @Time 14400 sec |
185 °F @Time 4.00 hour |
|
PlastiComp Complet® LGF20 - PA6 Nylon 6, 20% Long Glass Fiber Reinforced Complet® long-fiber reinforced pellets are manufactured to exceed expectation for quality and performance.Nylon 6 with 20% long glass reinforcementInformation provided by PlastiComp, Inc. |
|||
Drying Temperature | 85.0 °C @Time 7200 - 14400 sec |
185 °F @Time 2.00 - 4.00 hour |
|
Polyplastic Armamid® PA GF50-1 Nylon 6, 50% Glass Fiber High stiffnessInformation provided by PolyPlastic Group. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® GR15 HS 15% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron GR15 HS is a heat stabilized 15% glass reinforced polyamide 6 injection molding compound possessing a balance of engineering properties combined with excellent processability and surface aest.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® GR40 HS 40% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron GR40 HS is a heat stabilized 40% glass reinforced polyamide 6 injection molding compound offering the highest level of strength, stiffness, high temperature performance and dimensional stabil.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® HPN 9333G Impact Modified, 33% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron HPN 9333G is a 33% glass reinforced, impact modified polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with excellent surface a.. |
|||
Drying Temperature | 85.0 °C | 185 °F | |
Solvay Specialty Polymers Ixef® BXT-2000/0203 Polyarylamide (PARA)
(Unverified Data**) Ixef BXT-2000/0203 resin was developed specifically for extrusion and blow-molding processes. Unlike grades targeted for injection molding, Ixef BXT-2000/0203 resin can be successfully extruded into.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8202 NL Nylon 6 (Dry)
(discontinued **) Capron 8202 NL is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It is available in natural, heat sta.. |
|||
Drying Temperature | 85.0 °C | 185 °F | |
LTL Color Compounds ColorFast® PBA2000 PBT/ABS Alloy, Flame Retarded Flame-retarded V0-rated PBT/ABS alloyAll information provided by LTL Color Compounders, Inc. |
|||
Drying Temperature | 85.0 - 95.0 °C @Time 7200 - 18000 sec |
185 - 203 °F @Time 2.00 - 5.00 hour |
|
IRPC Polimaxx Porene KU200 Acrylonitrile Butadiene Styrene Applications:extrusion applicationautomotive parts such as instrument panels, console boxes, switches, automotive louvers, ectelectrical appliances |
|||
Drying Temperature | 85.0 °C @Time 7200 - 10800 sec |
185 °F @Time 2.00 - 3.00 hour |
Dehumidifying dryer |
Lehmann & Voss LUVOCOM® TPE-7829 Thermoplastic elastomer, with PTFE Applications: Improved friction and wear behaviour. Emergency running property.dynamic stressBearings, sleeves, sliding elements, chair rollers, handles.Information provided by Lehmann & Voss & Co.K.. |
|||
Drying Temperature | 85.0 °C | 185 °F | |
MTI ThermoStran® PA66-30C Long Carbon Fiber Compound ThermoStran® is custom designed long fiber thermoplastic compound (LFC) engineered to meet specific end use requirements. Continuous fibers are pultruded to yield pellets with fibers equivalent t.. |
|||
Drying Temperature | 85.0 °C | 185 °F | |
AdvanSource Biomaterials HYDROTHANE™ Hydrophilic Thermoplastic Polyurethane AdvanSource Biomaterials Corporation manufactures and markets hydrophilic high slip, high water absorptive, polyether aliphatic polyurethanes designed for use as coatings of catheters, sutures, intr.. |
|||
Drying Temperature | 85.0 °C | 185 °F | Injection |
Alliance Polymers Zythane™ 6080A Thermoplastic Polyurethane Elastomer Zythane™ 6080A is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good .. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8202C HS Nylon 6 (Dry)
(discontinued **) Capron 8202C HS is a heat stabilized, low viscosity, polyamide 6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It i.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8232G HS FR 25% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron 8232G HS FR is a 25% glass fiber reinforced, heat stabilized, flame retardant nylon 6 injection molding compound exhibiting excellent melt stability characteristics. It combines flame retard.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8253 Impact Modified Nylon 6 (Dry)
(discontinued **) Capron 8253 is an unfilled type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Capron 8253 HS) and/or pigmented versions.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8259 Impact Modified Nylon 6 (Dry)
(discontinued **) Capron 8259 is a type 6 nylon injection molding graft copolymer developed for fastener applications requiring to abusive impact molding combined with a high level of pullout strength. It exhibits v.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8333G Impact Modified, 33% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron 8333G is a 33% glass reinforced nylon 6 modified compound developed for applications requiring improved dry as molded toughness in combination with a balance of strength, stiffness, and excel.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8333G HI Impact Modified, 33% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron 8333G HI is a 33% glass reinforced, impact modified polyamide 6 injection molding compound developed for applications requiring improved dry as molded toughness in combination with a balance .. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® 8360 HS 34% Mineral-Filled Nylon 6 (Conditioned)
(discontinued **) Capron 8360 HS is a heat stabilized 34% mineral reinforced nylon 6 injection molding resin possessing a high level of toughness and ductility combined with excellent processability and surface aesth.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® BG50XFI Impact Modified Nylon 6 (Dry)
(discontinued **) Capron BG50XFI is an injection molding type 6 nylon graft copolymer with superior impact resistance and flow especially for thinner walled parts and long flow lengths. It is also available in natura.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® GR630 HS 30% Glass-Filled Nylon 66 (Dry)
(discontinued **) Capron GR630 HS is a heat stabilized, 30% glass fiber reinforced polyamide 6,6 injection molding compound offering excellent strength, stiffness, creep resistance and dimensional stability. This ba.. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® HPN 9233G HS BK-102 33% Glass-Filled Nylon 6 (Dry)
(discontinued **) Capron HPN 9233G HS BK-102 is a heat stabilized, pigmented black, 33% glass reinforced nylon 6 injection molding grade resin in the High Productivity Nylon Series developed for improved cycle times .. |
|||
Drying Temperature | 85.0 °C | 185 °F | See Materials Notes |
BASF Capron® HPN 9333G HS Impact Modified, 33% Glass-Filled Nylon 6 (Conditioned)
(discontinued **) Capron HPN 9333G HS is a heat stabilized, 33% glass reinforced, impact modified polyamide 6 injection molding compound combining exceptional strength, stiffness and high temperature performance with.. |
|||
Drying Temperature | 85.0 °C @Time 14400 sec |
185 °F @Time 4.00 hour |
|
PlastiComp Complet® LGF40 - PA66 Nylon 66, 40% Long Glass Fiber Reinforced Complēt® long-fiber reinforced pellets are manufactured to exceed expectation for quality and performance.Nylon 66 with 40% long glass fiber reinforcementInformation provided by PlastiComp, In.. |
|||
Drying Temperature | 85.0 °C | 185 °F | Injection |
Alliance Polymers Zythane™ 7075A Thermoplastic Polyurethane Elastomer Zythane™ 7075A is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good .. |