Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Polymax® Maxelast® A9860 TPE, ABS/PC Overmold Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesInform.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 125°C; ASTM D412 |
Precision Polymer Engineering E70X Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Rubber, 65-75 °IRHD. Copolymer of ethylene and propylene.Applications: Excellent water and steam resistance with good compression set properties. Superior heat a.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 125°C; ASTM D412 |
Precision Polymer Engineering E90K Ethylene Propylene Rubber General purpose, peroxide cured, Ethylene Propylene Terpolymer, 85-95 °IRHD. Terpolymer of ethylene, propylene and diene monomers. ASTM D2000/SAE J200 line call out M8CA910, A25, B35, C32, EA14, .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering H60B Epichlorohydrin Peroxide Cured, Epichlorohydrin Rubber, 55-65 °IRHD. Terpolymer of epichlorohydrin, ethylene oxide and an unsaturated monomer. To ASTM D2000 line call-out: M3CH608, A25, B14, EO16, EO36, F17. AS.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ISO 527 |
Polimeri Europa Riblene® MY 00 Low Density Polyethylene - Injection Molding Riblene MY 00 is a very high flowability low density polyethylene resin (LDPE).Main Applications: Riblene MY 00 is suitable for hot melts.Information provided by Polimeri Europa. |
|||
Tensile Strength, Yield | 8.00 - 12.0 MPa | 1160 - 1740 psi | ±20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering N90K Nitrile Rubber Peroxide cured Nitrile Rubber, 85-95 °IRHD. Copolymer of acrylonitrile and butadiene. ASTM designation = NBR. ISO designation = NBR. ASTM D2000/SAE J200 line call-out M7BG910, B14, EA14, EF11, EF21.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering Q90B Polyurethane Rubber Peroxide cured, Polyurethane Rubber, 85-95 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG910, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion resis.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering R90B Natural Rubber Natural Rubber, 85-95 °IRHD. This material is based on high-quality plantation (Hevea) rubber, reinforced with carbon black.Applications: Natural rubber offers low compression set, high tensile st.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S50T Silicone Rubber Translucent Silicone Rubber, 45-55 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excellent heat resistanc.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60A Silicone Rubber Blue Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fe.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60R Silicone Rubber Red Silicone 55-65 °IRHD. Diesel cylinder liner ring grade. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excell.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60T Silicone Rubber Translucent Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United St.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60Z Silicone Rubber Grey Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fo.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S70A Silicone Rubber Blue Silicone Rubber, 66-75 °IRHD.Complies with the formulation guidelines of the FDA. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain.Applications: Excellent .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S70T Silicone Rubber Translucent Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excellent heat resistanc.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S70Z Silicone Rubber Grey Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fe.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S72R Silicone Rubber Orange Silicone Rubber, 65-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
Huntsman PE1651 EVA Film Extrusion
(discontinued **) 6.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with outstanding low temperature strength, excellent clarity, and good heat seal.Applications: Film extrusion: ice bags, liqui.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | 50 mm/min; ASTM D638 |
ICO Polymers ICOTEXâ„¢ 520-5056 500 Micron LDPE Powder Description: ICOTEX 520-5056 is a low density polyethylene powder that has been developed to meet the special requirement of the textile coating industry. Key Characteristics: very high flow, very g.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Lubricomp FX00617 PE (Asia Pacific) LNP* Lubricomp* FX00617 is a compound based on Polyethylene resin containing Silicone. Added features of this material include: Internally Lubricated.This data was supplied by SABIC-IP for the Asia.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Teknor Apex APEX® 3211-55 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg B571 Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg Hypalon® H611 Chlorosulphonated Polyethylene PropertiesExcellent resistance to oxidation and has outstanding resistance to atmospheric conditions and in particular strong sunlight and ozone.CSM compounds resist fire and are self extinguishing .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg Neoprene® C432 Chloroprene CR or Chloroprene is a homopolymer of chloroprene or chlorobutadiene. NEOPRENE®PropertiesExcellent mechanical and abrasion properties even without reinforcing fillers.Reasonable resilience in grade.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg S750 Silicone Rubber PropertiesExcellent resistance to heat (dry air), at +200°C continuous and +220°C intermittent.Remains flexible at low temperatures of -70°C.Resistant to ultra-violet light, ozone and weathering... |
|||
Tensile Strength, Yield | 8.00 MPa @Strain 100 % |
1160 psi @Strain 100 % |
ISO 527-1/-2 |
Covestro Desmopan® 445 Polyurethane injection molding gradegrease and oil-resistantgood heat resistancelow compression setApplicationAutomotive engineeringInjection molded engineering partsPreprocessingMax. Water content |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
Braskem PB 608 LDPE Injection Molding Polyethylene Description: PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility propertie.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
Braskem PB608 Injection Molding Low Density Polyethylene Injected lids and caps; Large flat surface injected pieces.Information provided by Braskem. |
|||
Tensile Strength, Yield | 8.00 - 9.00 MPa | 1160 - 1310 psi | Average value: 8.50 MPa Grade Count:4 |
Overview of materials for Low Density Polyethylene (LDPE), Masterbatch Grade This property data is a summary of similar materials in the MatWeb database for the category "Low Density Polyethylene (LDPE), Masterbatch Grade". Each property range of values reported is minimum a.. |