Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Polymax® Maxelast® A9860 TPE, ABS/PC Overmold Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesInform.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ISO 527 |
Polimeri Europa Greenflex® ML 21 Ethylene Vinyl Acetate Copolymer - Injection Molding Greenflex ML 21 is an ethylene vinyl acetate copolymer (EVA) for injection molding, when a good ESCR is required. Greenflex ML 21 contains additive waxes to obtain high production speed.Main Applic.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 125°C; ASTM D412 |
Precision Polymer Engineering E70X Ethylene Propylene Rubber Peroxide cured, Ethylene Propylene Rubber, 65-75 °IRHD. Copolymer of ethylene and propylene.Applications: Excellent water and steam resistance with good compression set properties. Superior heat a.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering E80B Ethylene Propylene Rubber General Purpose, Ethylene Propylene Terpolymer (EPT) 75-85 IRHD. Terpolymer of ethylene, propylene and diene monomers. ASTM & ISO designation = EPDM.Applications: Excellent water and steam resistan.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering F70A Fluorosilicone Rubber Blue Fluorosilicone Rubber, 60 to 70 °IRHD. Fluorosilicone rubber having methyl, vinyl and fluorine substituent groups on the polymer chain. To meet Aerospace Specification Mil-R-25988B, Class 1, .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering J80P Butyl Rubber Phenolic/Resin cured Butyl Rubber, 75-85 IRHD. Isobutylene-Isoprene Rubber.Applications: Butyl is resistant to the same fluids as Ethylene Propylene (EPDM). It has excellent resistance to gas permea.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ISO 527 |
Polimeri Europa Riblene® MY 00 Low Density Polyethylene - Injection Molding Riblene MY 00 is a very high flowability low density polyethylene resin (LDPE).Main Applications: Riblene MY 00 is suitable for hot melts.Information provided by Polimeri Europa. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering N80L Nitrile Rubber Nitrile Butadiene Rubber, 75-85 °IRHD. Low acrylonitrile (ACN) content. Copolymer of acrylonitrile and butadiene. To meet ASTM D2000 line call-out M6BG814, A14, B14, EO14, EO34, F17.Applications: T.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering Q90A Polyurethane Rubber Peroxide cured, blue Polyurethane Rubber, 85-95 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG910, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasion .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | -20% change after 70 hours @ 100°C; ASTM D412 |
Precision Polymer Engineering Q90Y Polyurethane Rubber Peroxide cured, yellow Polyurethane Rubber, 85-95 °IRHD. Polyester-based urethane. To meet ASTM line call-out M5BG910, B14, EO14, EO34. ASTM & ISO designation = AU.Applications: Excellent abrasio.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S50T Silicone Rubber Translucent Silicone Rubber, 45-55 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excellent heat resistanc.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60A Silicone Rubber Blue Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States Fe.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60B Silicone Rubber Black Silicone Rubber, 55-65 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States F.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S60R Silicone Rubber Red Silicone 55-65 °IRHD. Diesel cylinder liner ring grade. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excell.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S70G Silicone Rubber Green Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States F.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S70R Silicone Rubber Red Silicone Rubber, 66-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. ASTM & ISO designation = VMQ.Applications: Excellent heat resistance and lo.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Precision Polymer Engineering S72R Silicone Rubber Orange Silicone Rubber, 65-75 °IRHD. Silicone rubber having both methyl and vinyl substituent groups on the polymer chain. Formulated using only those ingredients determined by the United States .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
Huntsman PE1651 EVA Film Extrusion
(discontinued **) 6.5% Vinyl Acetate EVA copolymer and FDA compliantFeatures: Yields film with outstanding low temperature strength, excellent clarity, and good heat seal.Applications: Film extrusion: ice bags, liqui.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
LyondellBasell Lupolen® V 2920 K Ethylene Vinyl Acetate, lnjection Molding Grade Injection moldingsData was collected by ISO methods and originally provided by BASF. The Lupolen® product line is now produced by Basell. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Lubricomp FX00617 PE (Asia Pacific) LNP* Lubricomp* FX00617 is a compound based on Polyethylene resin containing Silicone. Added features of this material include: Internally Lubricated.This data was supplied by SABIC-IP for the Asia.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Teknor Apex APEX® 3211-55 Polyvinyl Chloride, Flexible Material Status-Commercial: ActiveAvailability-North AmericaTest Standards Available-ASTMUses-Automotive Applications, Non-specific Food Applications, General Purpose, Medical Applications, Modeling.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D412 |
Vicone High Performance Rubber VicoSil™ KC605Q-OR High Performance Silicone Rubber Information provided by Vicone |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ISO 527-2 |
Total LDPE 1200 MN 18 C Low Density Polyethylene - Injection Molding and Compounding LDPE 1200 MN 18 C is a low density polyethylene made by a high pressure autoclave process without antioxidant.Application examples: flexible molding, handles, closures, household items, toys, variou.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg Hypalon® H711 Chlorosulphonated Polyethylene PropertiesExcellent resistance to oxidation and has outstanding resistance to atmospheric conditions and in particular strong sunlight and ozone.CSM compounds resist fire and are self extinguishing .. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg S650 Silicone Rubber PropertiesExcellent resistance to heat (dry air), at +200°C continuous and +220°C intermittent.Remains flexible at low temperatures of -70°C.Resistant to ultra-violet light, ozone and weathering... |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg S850 Silicone Rubber PropertiesExcellent resistance to heat (dry air), at +200°C continuous and +220°C intermittent.Remains flexible at low temperatures of -70°C.Resistant to ultra-violet light, ozone and weathering... |
|||
Tensile Strength, Yield | 8.00 MPa @Temperature 21.1 °C |
1160 psi @Temperature 70.0 °F |
Flatwise Tensile |
Hexcel® Redux® 308 Modified epoxy film adhesive Redux 308 is a high-strength film adhesive curing at 350°F. It is suitable for a wide range of structural bonding applications including metal to metal bonding and sandwich constructions, where ope.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | |
Trelleborg S750 Silicone Rubber PropertiesExcellent resistance to heat (dry air), at +200°C continuous and +220°C intermittent.Remains flexible at low temperatures of -70°C.Resistant to ultra-violet light, ozone and weathering... |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ASTM D638 |
Braskem PB 608 LDPE Injection Molding Polyethylene Description: PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility propertie.. |
|||
Tensile Strength, Yield | 8.00 MPa | 1160 psi | ISO 527-2 |
Carmel Olefins IPETHENE® 900 Low Density Polyethylene IPETHENE® 900 is a low density polyethylene injection molding grade. This grade is a good carrier for masterbatches production. It exhibits high melt flow rate, good transparency, and flexibility. .. |