Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D4894 |
3M Dyneon™ TFM™ 1705 Modified PTFE Powder
(discontinued **) Type II, gr. 1 PTFE. Dyneon™ TFM™ 1705 PTFE is a second-generation modified polytetrafluoro-ethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of first-generat.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | Sintered moldings; ASTM D4894/D4895 |
3M Dyneon™ TFM™ 1605 Modified PTFE Powder
(discontinued **) Type III, gr. 2 PTFE. Second-generation PTFE that is a chemically modified to allow new designs and processing methods. Very good free-flowing powder properties.Data provided by Dyneon. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D4894 |
3M Dyneon™ 1750 PTFE Powder
(discontinued **) Type II PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a wide r.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | Sintered moldings; ASTM D4894/D4895 |
3M Dyneon™ 1502 PTFE Powder
(discontinued **) Type VI PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a wide r.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | Sintered moldings; ASTM D4894/D4895 |
3M Dyneon™ TF 2071 PTFE Paste Extrusion Powder
(discontinued **) Type I PTFE. Free flowing powder. Minimum reduction ratio is 20; Max is 1600. Average particle size 500 µm. Used for tubing, wire/cable insulation, 'spaghetti tubing' production.Dyneon offers a.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | Sintered moldings; ASTM D4894/D4895 |
3M Dyneon™ TF 2072 PTFE Paste Extrusion Powder
(discontinued **) Type I PTFE. Free flowing powder. Minimum reduction ratio is 50; Max is 3000. Average particle size 500 µm. Used for wire/cable insulation, 'spaghetti tubing' production.Dyneon offers a family .. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D4894 |
3M Dyneon™ TR 1105 PTFE
(discontinued **) Ideal for thin wall ram extrusion productsReduces cold flow and melt viscosityLower permeabilityLower porosityWeldableExcellent product smoothnessIncreased machine outputInformation provided by Dyne.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D4895 |
3M Dyneon™ TF 2071 PTFE
(discontinued **) Processable by standard paste extrusion methodTF 2071 and TF 2072 have a wide processing range because of high maximum allowable reduction ratioTF 2071 is recommended for high quality tubing and wir.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D4895 |
3M Dyneon™ TF 2072 PTFE
(discontinued **) Processable by standard paste extrusion methodTF 2071 and TF 2072 have a wide processing range because of high maximum allowable reduction ratioTF 2072 is recommended for thin-wall, small diameter t.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
Ferro EG 1001 Metal Sealing Glass Type: Si-B Typical Powder Form: VSD Typical Application: Gun Mount Ferro Metal Sealing glasses are formulated for sealing a wide range of metal packages and parts, including matched seals for.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
IBC Advanced Alloys Beralcast® 191 Beryllium-Aluminum Alloy This alloy consists of 65% Be and 35% Al (by weight) and is used primarily for moderate strength cast electronic and thermal packaging applications. BeAl-191 also provides a unique capability for se.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
IBC Advanced Alloys Beralcast® 310 Beryllium-Aluminum Alloy This alloy, a metal matrix composite, consisting of between 60 and 70% Be (by weight) is a wrought product offered by IBC Engineered Materials to be used in the process of manufacturing extrusions f.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
IBC Advanced Alloys Beralcast® 363 Beryllium-Aluminum Alloy This alloy provides an ideal solution for weight, stiffness and thermal critical applications in aerospace, defense and commercial markets. BeAl-363 is a metal matrix composite which consists of 65%.. |
|||
Density | 2.16 - 2.20 g/cc | 0.0780 - 0.0795 lb/in³ | ASTM D792-50 |
Mikro-Technik Reproflon PTFE Reproflon is reclaimed PTFE scraps. The powder can be reused for the usual manufacturing procedures.Information provided by Mikro-Technik GmbH |
|||
Density | 2.16 - 2.20 g/cc | 0.0780 - 0.0795 lb/in³ | |
Mikro-Technik Reproflon G25 PTFE Available Forms: Rods, Tubes. Special Characteristics:Higher resistance to abrasionHigher resistance to compression compared to virgin PTFE and unfilled ReproflonReduced plastic flowInformation prov.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Algoflon® F 5/S Polytetrafluoroethylene (PTFE) Algoflon® F 5/S is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Hyflon® MFA® P6010 Perfluoropolymer Hyflon® MFA P6010 is a clear, semi-crystalline melt processable perfluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in anti.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Hyflon® MFA® P6310 Perfluoropolymer Hyflon® MFA P6310 is a clear, semi-crystalline melt processable perfluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in anti.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Hyflon® PFA P7310 Perfluoroalkoxy (PFA) Hyflon® PFA P7310 is a clear, semi-crystalline melt processable perfluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in anti.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Solvay Specialty Polymers Hyflon® PFA P7010 Perfluoroalkoxy (PFA) Hyflon® PFA P7010 is a clear, semi-crystalline melt processable perfluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in anti.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
Saint-Gobain Fluoroloy® A01 High Performance Seal Material Excellent for light dynamic and static service; Limited wear and heat resistance; Low gas permeability; Good cryogenic properties; Moderate to hard vacuum service; FDA approved.
Information provide.. |
|||
Density | 2.16 - 2.22 g/cc | 0.0780 - 0.0802 lb/in³ | ASTM D792 |
Zeus PTFE Tubing Zeus offers a wide range of standard size products and precision custom PTFE Tubing. PTFE Tubing has become the gold standard in industries requiring the ultimate in lubricity, high temperature use,.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
Zircar Refractory Composites RS-1200 Refractory Sheet ZIRCAR Refractory Sheet Type RS-1200 is a high strength composite designed for use as thermo-mechanical and electrical insulation in applications with temperatures as high as 1300°C(2372°F). RS-12.. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | |
Corning 7761 Potash Borosilicate Crushed/Powdered Glass Available in mesh sizes 4 through 325 and can be customized. Used for sealing and other applications.Information provided by Corning Incorporated. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ISO 1183 |
Azoty Tarnow™ TARFLEN SM-G15 PTFE Tarflen SM1 reinforced with 15% graphite for standard compression molding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | ISO 1183 |
Azoty Tarnow™ TARFLEN SM-G20 PTFE Reinforced with 20% graphite for standard compression molding.Information provided by Zakłady Azotowe w Tarnowie-Moscicach S.A. |
|||
Density | 2.16 g/cc | 0.0780 lb/in³ | DIN EN ISO 12086 |
3M Dyneon™ TF 2053Z PTFE Fine Powder Dyneon™ TF 2053 Z PTFE is an ideal grade for extrusion of tubing and cables requiring only moderately high reduction ratio.Product Features:Processable by standard paste extrusion methods Good over.. |