POLYMER SEARCH

Styrolution PS 456EB HIPS

Category	Polymer , Thermoplastic , Polystyrene (PS) , Polystyrene, Impact Modified
Manufacturer	Styrolution
Trade Name	PS
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution PS 456EB HIPS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Styrolution PS 456EB is a high flow, high impact polystyrene with a good heat resistance and a high stiffness, developed for injection blow molding applications, especially for bottle of yot.High flowInjection blow molding applicationsInformation provided by Styrolution

Physical Properties	Metric	English	Comments
Density	1.05 g/cc	0.0379 lb/inÂ³	ISO 1183
Moisture Absorption at Equilibrium	<= 0.10 % @Temperature 23.0 Â°C	<= 0.10 % @Temperature 73.4 Â°F	50% RH; ISO 62
Water Absorption at Saturation	<= 0.10 % @Temperature 23.0 Â°C	<= 0.10 % @Temperature 73.4 Â°F	ISO 62
Linear Mold Shrinkage	0.0040 - 0.0070 cm/cm	0.0040 - 0.0070 in/in	ISO 294-4
Melt Flow	7.0 g/10 min @Load 5.00 kg, Temperature 200 Â°C	7.0 g/10 min @Load 11.0 lb, Temperature 392 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	90.0 MPa	13100 psi	ISO 2039-1
Tensile Strength, Yield	23.0 MPa	3340 psi	ISO 527
Elongation at Break	40 %	40 %	ISO 527
Elongation at Yield	1.5 %	1.5 %	ISO 527
Tensile Modulus	2.00 GPa	290 ksi	ISO 527
Flexural Strength	42.0 MPa	6090 psi	ISO 178
Flexural Modulus	2.10 GPa	305 ksi	ISO 178
Izod Impact, Notched (ISO)	9.00 kJ/mÂ² @Temperature 23.0 Â°C	4.28 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 180/A
Charpy Impact Unnotched	7.00 J/cmÂ² @Temperature -30.0 Â°C	33.3 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
	12.0 J/cmÂ² @Temperature 23.0 Â°C	57.1 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179
Charpy Impact, Notched	1.10 J/cmÂ²	5.23 ft-lb/inÂ²	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	100 Âµm/m-Â°C	55.6 Âµin/in-Â°F	ISO 11359
Deflection Temperature at 0.46 MPa (66 psi)	85.0 Â°C	185 Â°F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	77.0 Â°C	171 Â°F	ISO 75
Vicat Softening Point	86.0 Â°C @Load 5.10 kg	187 Â°F @Load 11.2 lb	50Â°C/h; ISO 306
	94.0 Â°C @Load 1.02 kg	201 Â°F @Load 2.25 lb	50Â°C/h; ISO 306

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+18 ohm-cm	>= 1.00e+18 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	IEC 60093
Dielectric Constant	2.5 @Frequency 100 Hz	2.5 @Frequency 100 Hz	IEC 60250
Dielectric Strength	155 kV/mm @Thickness 1.50 mm	3940 kV/in @Thickness 0.0591 in	Short Time; IEC 60243-1
Dissipation Factor	0.00040 @Frequency 1.00e+6 Hz	0.00040 @Frequency 1.00e+6 Hz	IEC 60250

Processing Properties	Metric	English	Comments
Melt Temperature	180 - 260 Â°C	356 - 500 Â°F	ISO 294
Mold Temperature	10.0 - 60.0 Â°C	50.0 - 140 Â°F	ISO 294
Injection Velocity	200 mm/sec	7.87 in/sec	ISO 294

Users viewing this material also viewed the following: