POLYMER SEARCH

Styrolution Luran® S KR 2861/1 C Colored ASA+PC

Category	Polymer , Thermoplastic , ASA Polymer , Polycarbonate (PC) , Polycarbonate/ASA Alloy, Unreinforced
Manufacturer	Styrolution
Trade Name	Luran®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution Luran® S KR 2861/1 C Colored ASA+PC.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Grade with high heat resistance for injection molding and extrusion.Applications: Interior and exterior automotive parts, and electrical housings.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS

Physical Properties	Metric	English	Comments
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Water Absorption	0.90 %	0.90 %	Equilibrium; ISO 62
	0.30 % @Time 86400 sec	0.30 % @Time 24.0 hour	ISO 62
Moisture Absorption at Equilibrium	0.25 %	0.25 %	23°C/50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0030 - 0.0070 cm/cm	0.0030 - 0.0070 in/in
Melt Flow	16.24 g/10 min @Load 5.00 kg, Temperature 260 °C	16.24 g/10 min @Load 11.0 lb, Temperature 500 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	95.0 MPa @Load 36.5 kg, Time 30.0 sec	13800 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	53.0 MPa	7690 psi	50 mm/min; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	Nominal, 50 mm/min; ISO 527-1/-2
Elongation at Yield	4.9 %	4.9 %	50 mm/min; ISO 527-1/-2
Tensile Modulus	2.30 GPa	334 ksi	ISO 527-1/-2
Flexural Strength	78.0 MPa	11300 psi	ISO 178
Poissons Ratio	0.28	0.28	Calculated
Shear Modulus	0.900 GPa	131 ksi	ISO 6721-2
Charpy Impact Unnotched	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	2.00 J/cm² @Temperature -30.0 °C	9.52 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	6.00 J/cm² @Temperature 23.0 °C	28.6 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	1600 MPa @Strain <=0.500 %	232000 psi @Strain <=0.500 %	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	70.0 - 90.0 µm/m-°C @Temperature 23.0 - 80.0 °C	38.9 - 50.0 µin/in-°F @Temperature 73.4 - 176 °F	ISO 11359-1/-2
Thermal Conductivity	0.170 W/m-K	1.18 BTU-in/hr-ft²-°F	DIN 52612-1
Maximum Service Temperature, Air	110 °C	230 °F
Deflection Temperature at 0.46 MPa (66 psi)	125 °C	257 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	106 °C	223 °F	ISO 75-1/-2
Vicat Softening Point	120 °C	248 °F	VST/B/50; ISO 306
	136 °C	277 °F	VST/A/50; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10
	HB @Diameter 4.00 mm	HB @Diameter 0.157 in	IEC 60707

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	3.2 @Frequency 1.00e+6 Hz	3.2 @Frequency 1.00e+6 Hz	IEC 60250
	3.4 @Frequency 100 Hz	3.4 @Frequency 100 Hz	IEC 60250
Dielectric Strength	38.0 kV/mm	965 kV/in	K20/P20; IEC 60243-1
Dissipation Factor	0.0060 @Frequency 100 Hz	0.0060 @Frequency 100 Hz	IEC 60250
	0.015 @Frequency 1.00e+6 Hz	0.015 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	225 V	225 V	Test Liquid A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 280 °C	482 - 536 °F	Extrusion, Plates
	260 - 300 °C	500 - 572 °F	Injection Molding
Mold Temperature	60.0 - 90.0 °C	140 - 194 °F	Injection Molding
Drying Temperature	100 - 110 °C	212 - 230 °F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour	Pre-drying

Descriptive Properties	Value	Comments
Color	Black 35914
	Black 89828
	Natural
	White 31425 Q105
Commercial Status	Europe
Primary Processing Technique	Injection Molding and Extrusion

Users viewing this material also viewed the following: