POLYMER SEARCH

Styrolution LuranÂ® S 778 TE UV Colored ASA

Category	Polymer , Thermoplastic , ASA Polymer
Manufacturer	Styrolution
Trade Name	Luran®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styrolution LuranÂ® S 778 TE UV Colored ASA.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: Extrusion grade with enhanced toughness and heat distortion resistance.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS

Physical Properties	Metric	English	Comments
Density	1.07 g/cc	0.0387 lb/inÂ³	ISO 1183
Water Absorption	1.65 %	1.65 %	Equilibrium; ISO 62
	0.45 % @Time 86400 sec	0.45 % @Time 24.0 hour	ISO 62
Moisture Absorption at Equilibrium	0.35 %	0.35 %	23Â°C/50% RH; ISO 62
Melt Flow	5.35 g/10 min @Load 10.0 kg, Temperature 220 Â°C	5.35 g/10 min @Load 22.0 lb, Temperature 428 Â°F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	85.0 MPa @Load 36.5 kg, Time 30.0 sec	12300 psi @Load 80.5 lb, Time 0.00833 hour	ISO 2039-1
Tensile Strength, Yield	54.0 MPa	7830 psi	50 mm/min; ISO 527-1/-2
Elongation at Break	8.0 %	8.0 %	Nominal, 50 mm/min; ISO 527-1/-2
Elongation at Yield	3.4 %	3.4 %	50 mm/min; ISO 527-1/-2
Tensile Modulus	2.50 GPa	363 ksi	ISO 527-1/-2
Flexural Strength	80.0 MPa	11600 psi	ISO 178
Charpy Impact Unnotched	9.00 J/cmÂ² @Temperature -30.0 Â°C	42.8 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eU
	25.0 J/cmÂ² @Temperature 23.0 Â°C	119 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eU
Charpy Impact, Notched	0.400 J/cmÂ² @Temperature -30.0 Â°C	1.90 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1eA
	1.50 J/cmÂ² @Temperature 23.0 Â°C	7.14 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 179/1eA
Tensile Creep Modulus, 1000 hours	1250 MPa @Strain <=0.500 %	181000 psi @Strain <=0.500 %	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	80.0 - 110 Âµm/m-Â°C @Temperature 23.0 - 80.0 Â°C	44.4 - 61.1 Âµin/in-Â°F @Temperature 73.4 - 176 Â°F	ISO 11359-1/-2
Thermal Conductivity	0.170 W/m-K	1.18 BTU-in/hr-ftÂ²-Â°F	DIN 52612-1
Maximum Service Temperature, Air	90.0 Â°C	194 Â°F
Deflection Temperature at 0.46 MPa (66 psi)	106 Â°C	223 Â°F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	103 Â°C	217 Â°F	ISO 75-1/-2
Vicat Softening Point	104 Â°C	219 Â°F	VST/B/50; ISO 306
	113 Â°C	235 Â°F	VST/A/50; ISO 306
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10
	HB @Diameter 4.00 mm	HB @Diameter 0.157 in	IEC 60707

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	3.5 @Frequency 1.00e+6 Hz	3.5 @Frequency 1.00e+6 Hz	IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
Dielectric Strength	35.0 kV/mm	889 kV/in	K20/P20; IEC 60243-1
Dissipation Factor	0.0090 @Frequency 100 Hz	0.0090 @Frequency 100 Hz	IEC 60250
	0.033 @Frequency 1.00e+6 Hz	0.033 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	Test Liquid A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	200 - 240 Â°C	392 - 464 Â°F	Extrusion, Pipes
	210 - 250 Â°C	410 - 482 Â°F	Extrusion, Plates
Drying Temperature	80.0 Â°C	176 Â°F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour	Pre-drying

Descriptive Properties	Value	Comments
Color	Brown 36949
	Brown 36950
	Brown 37002
Commercial Status	Europe
Primary Processing Technique	Extrusion

Users viewing this material also viewed the following: