Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Temperature = 210 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Melt Temperature 210 - 221 °C
410 - 430 °F
PlastiComp Complet® LGF60 - PP Homopolymer Polypropylene, 60% Long Glass Fiber Reinforced
Complēt® long-fiber reinforced pellets are manufactured to exceed expectation for quality and performance.Polypropylene with 60% long glass fiber reinforcementInformation provided by PlastiCom..
Melt Temperature 210 - 240 °C
410 - 464 °F
Extrusion
Polimeri Europa Edistir RCL 600 Polystyrene  (discontinued **)
Special medium impact polystyrene extrusion grade exhibiting very high gloss. This grade should be used where is required an excellent surface finish. It can be directly extruded in foils and sheets..
Melt Temperature 210 - 220 °C
410 - 428 °F
LG Chemical LUCEL EC-610B Electrically Conductive POM, 10% Carbon Black Filled
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
Melt Temperature 210 - 220 °C
410 - 428 °F
Injection Molding
LG Chemical LUCEL GC210 POM+GF10%, High Rigidity
Feature: Injection Molding, POM+GF10%, High RigidityApplication: Casings of Pump and Pivot BearingsCAS No. 66455-31-0 and 65997-17-3Information provided by LG Chemical
Melt Temperature 210 - 240 °C
410 - 464 °F
LG Chemical LUPOL TE-5202U Thermoplastic Elastomer Alloy, 20% Polymer Alloy, High Impact, High Modulus
LUPOL resins, based on polyolefin with a wide range of characteristics, are a family of low cost engineering plastics.Applications: Automotive: Bumper cover, instrument panel, glove box, air cleaner..
Melt Temperature 210 - 240 °C
410 - 464 °F
Injection Molding
LG Chemical PT270 ABS
Feature: Injection Molding, Good PaintabilityApplication: Exterior Part of Automobile and Motor cycleCAS No. 9003-56-9Information provided by LG Chemical
Melt Temperature 210 - 250 °C
410 - 482 °F
Injection
Inno-Comp INNOPOL® CS 2-3840 MO 40% Glass Filled Polypropylene Copolymer
INNOPOL® CS 2-3840 MO is a 40 % glass-fiber-filled polypropylene block-copolymer compound. This grade is available in natural and custom colored form.INNOPOL® CS 2-3840 MO is recommended for p..
Melt Temperature 210 - 230 °C
410 - 446 °F
LATI Latamid 12 H2 K/30 PA 12, 30% Carbon Fiber Reinforced, Heat Stabilized
Polyamide 12 (PA12) based compound. Heat stabilized. Carbon fiber. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Termop..
Melt Temperature 210 - 232 °C
410 - 450 °F
Fiberfil® J-69/20/E High performance polypropylene Homopolymer, 20% Glass Reinforced, Chemically coupled
Information provided by FIBERFIL Engineered Plastics
Melt Temperature 210 - 232 °C
410 - 450 °F
Fiberfil® J-69/40/E High performance polypropylene Homopolymer, 40% Glass Reinforced, Chemically coupled
Information provided by FIBERFIL Engineered Plastics
Melt Temperature 210 - 240 °C
410 - 464 °F
Injection Molding
LG Chemical SG175NS ABS, Super Surface Gloss, General Anti-Static
Feature: Injection Molding, Super Surface Gloss, General Anti-StaticApplication: Electric & Electronic ProductsCAS No. 9003-56-9Information provided by LG Chemical
Melt Temperature 210 - 230 °C
410 - 446 °F
LATI Latamid 12 H2 G/30 PA 12, 30% Glass Fiber Reinforced, Heat Stabilized
Polyamide 12 (PA12) based compound. Heat stabilized. Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided by Lati Industria Termop..
Melt Temperature 210 °C
410 °F
Teknor Apex Chemlon® 267 Nylon 6, Impact Modified
Notes: Chemlon® is a product offering flexural modulus, impact and elongation properties suitable for convoluted tubing and wire coating applications. Features: Copolymer; Good Flexibility; Good ..
Melt Temperature 210 - 243 °C
410 - 469 °F
Styrolution NAS® 90 High Performance Styrenic
NAS® 90 has sparkling clarity, improved toughness, and good scratch resistance. This easily processed copolymer blends well with clear impact modifiers. It meets USP XXIII Spec. of Class VI Pla..
Melt Temperature 210 - 260 °C
410 - 500 °F
Borealis BJ360MO Polypropylene Copolymer
BJ360MO is a heterophasic copolymer. This grade provides unique combination of very high melt flow rate, high impact strength and stiffness. and is designed for high-speed injection molding and cont..
Melt Temperature 210 - 250 °C
410 - 482 °F
Borealis Borpact™ SG321MO Polypropylene Random Heterophasic Copolymer for Injection Molding
Borpact SG321MO is a specially designed modified relatively soft and transparent polypropylene random heterophasic copolymer intended for injection molding. Borpact SG321MO has excellent flow, is f..
Melt Temperature 210 °C
410 °F
Cast Film
Westlake EF524 14.5% Ethylene Vinyl Acetate Copolymer
Westlake ELEVATE™ EF524 is an ethylene vinyl acetate copolymer with 14.5% VA. EF524 is designed for blown and cast films requiring excellent optics and low heat seal initiation. High melt strength..
Melt Temperature 210 - 260 °C
410 - 500 °F
Borealis RG435MO Polypropylene, Transparent Random Copolymer
RG435MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. Products molded from this grade exhibit excellent transparency, good gloss, high impact..
Melt Temperature 210 - 235 °C
410 - 455 °F
CoExtrusion with EVOH Processing
DuPont™ Bynel® 21E781 Anhydride Modified Ethylene Acrylate
BYNEL® Series 2100 resins are anhydride modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available i..
Melt Temperature 210 - 235 °C
410 - 455 °F
CoExtrusion with EVOH Processing
DuPont™ Bynel® 21E810 Anhydride Modified Ethylene Acrylate
BYNEL® Series 2100 resins are anhydride modified ethylene acrylate resins. They contain a temperature stable ester that allows them to be functional in high temperature coextrusions. They are avail..
Melt Temperature 210 - 235 °C
410 - 455 °F
CoExtrusion with EVOH Processing
DuPont™ Bynel® 41E850 Anhydride Modified LLDPE
BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional ext..
Melt Temperature 210 - 235 °C
410 - 455 °F
CoExtrusion with EVOH Processing
DuPont™ Bynel® 41E865 Anhydride Modified LLDPE
BYNEL® Series 4100 series resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All BYNEL Series 4100 series resins are available in pellet form for use in conventional ext..
Melt Temperature 210 °C
410 °F
Equate EMDA-6147 HDPE Blow Molding Resin
EMDA-6147 is a high density polyethylene copolymer resin designed for blow molding of large size containers. Its high molecular weight and broad molecular weight distribution with a balanced density..
Melt Temperature 210 - 260 °C
410 - 500 °F
Carmel Olefins CAPILENE® QW 73 AV Propylene Random Copolymer
Description: CAPILENE® QW 73 AV is a high melt flow rate, controlled rheology polypropylene random copolymer for injection molding of clear articles. CAPILENE® QW 73 AV is clarified with antista..
Melt Temperature 210 - 260 °C
410 - 500 °F
Carmel Olefins CAPILENE® QT 73 A Propylene Random Copolymer
Description: CAPILENE® QT 73 A is a clarified and antistatic additivated polypropylene random copolymer with a high melt flow rate, intended for injection molding of clear articles. It exhibits g..
Melt Temperature 210 - 260 °C
410 - 500 °F
Carmel Olefins CAPILENE® QU 73 AV Propylene Random Copolymer
Description: CAPILENE® QU 73 AV is a high melt flow rate, controlled rheology polypropylene random copolymer for injection molding of clear articles. CAPILENE® QU 73 AV is clarified with antista..
Melt Temperature 210 °C
410 °F
Optimal
BASF Ultraform® N2720 M63 30% Mineral Filled POM
Description: Is a POM, 30 % mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.Information provided by BASF
Melt Temperature 210 - 220 °C
410 - 428 °F
Injection Molding
DuPont Performance Polymers Delrin® FG100TL NC010 Acetal Homopolymer  (Unverified Data**)
Delrin® 100TL is a high viscosity acetal homopolymer, containing 1.5% Teflon® PTFE Micropowder. It has been developed for consideration into applications such as parts for the food industry.Inform..
Copyright © lookpolymers.com All Rights Reserved