Solvay Specialty Polymers Amodel® ET-1000 HS Polyphthalamide (PPA) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® ET-1000 HS Polyphthalamide (PPA) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Amodel ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel PPA resins, ET-1000 HS offers high fatigue strength, good chemical resistance and high mechanical property retention over a broad temperature and humidity range. - Natural: ET-1000 HS NTData is presented for dry polymer unless noted as 'conditioned'.Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Density	1.13 g/cc	0.0408 lb/in³	ISO 1183/A
Water Absorption	0.70 % @Time 86400 sec	0.70 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage, Flow	0.015 cm/cm	0.015 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.015 cm/cm	0.015 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	120	120	R-Scale; ASTM D785
Tensile Strength at Break	60.0 MPa @Temperature 23.0 °C	8700 psi @Temperature 73.4 °F	ISO 527-2
Tensile Strength	62.7 MPa @Temperature 23.0 °C	9090 psi @Temperature 73.4 °F	Conditioned; ASTM D638
	68.9 MPa @Temperature 23.0 °C	9990 psi @Temperature 73.4 °F	ASTM D638
	96.5 MPa @Temperature -40.0 °C	14000 psi @Temperature -40.0 °F	Conditioned; ASTM D638
	110 MPa @Temperature -40.0 °C	16000 psi @Temperature -40.0 °F	ASTM D638
Tensile Strength, Yield	33.8 MPa @Temperature 100 °C	4900 psi @Temperature 212 °F	ISO 527-2
	70.3 MPa @Temperature 23.0 °C	10200 psi @Temperature 73.4 °F	ISO 527-2
Elongation at Break	7.0 % @Temperature 23.0 °C	7.0 % @Temperature 73.4 °F	ISO 527-2
	11 % @Temperature -40.0 °C	11 % @Temperature -40.0 °F	Conditioned; ASTM D638
	12 % @Temperature -40.0 °C	12 % @Temperature -40.0 °F	ASTM D638
	18 % @Temperature 23.0 °C	18 % @Temperature 73.4 °F	Conditioned; ASTM D638
	20 % @Temperature 23.0 °C	20 % @Temperature 73.4 °F	ASTM D638
	95 % @Temperature 100 °C	95 % @Temperature 212 °F	ISO 527-2
Elongation at Yield	4.3 % @Temperature 100 °C	4.3 % @Temperature 212 °F	ISO 527-2
	5.0 % @Temperature 23.0 °C	5.0 % @Temperature 73.4 °F	ISO 527-2
	6.0 % @Temperature 23.0 °C	6.0 % @Temperature 73.4 °F	Conditioned; ASTM D638
	6.0 % @Temperature 23.0 °C	6.0 % @Temperature 73.4 °F	ASTM D638
	9.0 % @Temperature -40.0 °C	9.0 % @Temperature -40.0 °F	Conditioned; ASTM D638
	9.0 % @Temperature -40.0 °C	9.0 % @Temperature -40.0 °F	ASTM D638
Tensile Modulus	2.41 GPa	350 ksi	Conditioned; ASTM D638
	2.41 GPa	350 ksi	ASTM D638
	2.00 GPa @Temperature 100 °C	290 ksi @Temperature 212 °F	ISO 527-2
	2.41 GPa @Temperature 23.0 °C	350 ksi @Temperature 73.4 °F	ISO 527-2
Flexural Strength	85.5 MPa	12400 psi	Conditioned; ASTM D790
	109 MPa	15800 psi	ASTM D790
	44.1 MPa @Temperature 100 °C	6400 psi @Temperature 212 °F	ISO 178
	70.3 MPa @Temperature 23.0 °C	10200 psi @Temperature 73.4 °F	ISO 178
Flexural Modulus	2.14 GPa	310 ksi	ASTM D790
	2.28 GPa	331 ksi	ASTM D790
	1.31 GPa @Temperature 100 °C	190 ksi @Temperature 212 °F	ISO 178
	1.79 GPa @Temperature 23.0 °C	260 ksi @Temperature 73.4 °F	ISO 178
Shear Strength	58.6 MPa	8500 psi	ASTM D732
Izod Impact, Notched	1.10 J/cm @Temperature -40.0 °C	2.06 ft-lb/in @Temperature -40.0 °F	ASTM D256
	9.10 J/cm @Temperature 23.0 °C	17.0 ft-lb/in @Temperature 73.4 °F	ASTM D256
	11.0 J/cm @Temperature 23.0 °C	20.6 ft-lb/in @Temperature 73.4 °F	Conditioned; ASTM D256
Izod Impact, Notched (ISO)	73.0 kJ/m²	34.7 ft-lb/in²	ISO 180/1A
Izod Impact, Unnotched (ISO)	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 180/1U
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
Charpy Impact, Notched	7.80 J/cm²	37.1 ft-lb/in²	ISO 179/1eA
Dart Drop, Total Energy	54.2 J	40.0 ft-lb	ASTM D3763
Taber Abrasion, mg/1000 Cycles	6.0 @Load 1.00 kg	6.0 @Load 2.20 lb	CS-17 Wheel; ASTM D1044

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	77.0 µm/m-°C @Temperature 0.000 - 100 °C	42.8 µin/in-°F @Temperature 32.0 - 212 °F	TMA; ASTM E831
	140 µm/m-°C @Temperature 100 - 200 °C	77.8 µin/in-°F @Temperature 212 - 392 °F	TMA; ASTM E831
CTE, linear, Transverse to Flow	81.0 µm/m-°C @Temperature 0.000 - 100 °C	45.0 µin/in-°F @Temperature 32.0 - 212 °F	ASTM E831
	110 µm/m-°C @Temperature 100 - 200 °C	61.1 µin/in-°F @Temperature 212 - 392 °F	ASTM E831
Melting Point	310 °C	590 °F	Peak; ASTM D3418
	310 °C	590 °F	ISO 11357-3
Deflection Temperature at 1.8 MPa (264 psi)	109 °C	228 °F	Unannealed; ISO 75-2/A
	120 °C	248 °F	Annealed; ASTM D648

Processing Properties	Metric	English
Rear Barrel Temperature	304 - 318 °C	579 - 604 °F
Front Barrel Temperature	316 - 329 °C	601 - 624 °F
Melt Temperature	321 - 343 °C	610 - 649 °F
Mold Temperature	70.0 - 90.0 °C	158 - 194 °F
Drying Temperature	110 °C	230 °F
Dry Time	4.00 hour	4.00 hour
Moisture Content	0.045 %	0.045 %

Descriptive Properties	Value	Comments
Additive	Heat Stabilizer
	Impact Modifier
Appearance	Natural Color
Automotive Specifications	ASTM D4000 PA1234 Color: BK684 Black
	ASTM D4000 PA1234 Color: NT Natural
	ASTM D6779 PA1234
	DELPHI 23295267 Color: BK-684, NT Black & Natural
	DELPHI 28213409 Color: BK-684, NT Black & Natural
	DELPHI M-2965 Color: BK684 Black
	DELPHI M-2965 Color: NT Natural
	DELPHI MSP24103175 Color: NT Natural
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Ductile
	Good Chemical Resistance
	Heat Stabilized
	Hot Water Moldability
	Impact Modified
	Low Warpage
Forms	Pellets
Generic	PPA
Processing Method	Water-Heated Mold Injection Molding
RoHS Compliance	RoHS Compliant
Uses	Automotive Applications
	Automotive Electronics
	Automotive Under the Hood
	Connectors
	General Purpose
	Housings
	Industrial Applications
	Industrial Parts
	Lawn and Garden Equipment
	Machine/Mechanical Parts
	Metal Replacement

Users viewing this material also viewed the following: