- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- Nylon 12, Cast
- Schwartz Technical Plastics LAMIGAMID® 1200 Cast Polyamide 12, Dry
Schwartz Technical Plastics LAMIGAMID® 1200 Cast Polyamide 12, Dry
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 , Nylon 12, Cast |
| Manufacturer | Schwartz Technical Plastics |
| Trade Name | LAMIGAMID® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Schwartz Technical Plastics LAMIGAMID® 1200 Cast Polyamide 12, Dry.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Application: sprockets, chain-wheels, pulleys, wheels, slide and seal rings, curve disks, etc.Information provided by Schwartz Technical Plastics GmbH
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.03 g/cc | 0.0372 lb/in³ | ISO R 1183 |
| Moisture Absorption at Equilibrium | 0.90 % | 0.90 % | DIN 53473 |
| Water Absorption at Saturation | 1.4 % @Temperature 20.0 °C |
1.4 % @Temperature 68.0 °F |
ISO R 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 100 MPa | 14500 psi | Hc 30; ISO 2039; partially |
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO-DIS 527 |
| Tensile Modulus | 2.00 GPa | 290 ksi | DIN 53457 |
| Flexural Strength | 90.0 MPa | 13100 psi | DIN 54352 |
| Flexural Modulus | 2.00 GPa | 290 ksi | DIN 53457 |
| Compressive Strength | 38.0 MPa | 5510 psi | 5% pressing; EN ISO 604 |
| 56.0 MPa | 8120 psi | 10% pressing; EN ISO 604 | |
| 76.0 MPa | 11000 psi | 20% pressing; EN ISO 604 | |
| Izod Impact, Notched (ISO) | >= 1.00 kJ/m² | >= 0.476 ft-lb/in² | DIN 53453 |
| Izod Impact Resistance | NB | NB | swinging hammer 0,1 DIN 51222; DIN 53453 |
| Coefficient of Friction, Dynamic | 0.38 | 0.38 | no lube; Steel 2162, Rvst=2E-6m, p=0.05 Mpa, v=0.6 m/s, t=40°C |
| Tear Strength Test | >= 0.20 | >= 0.20 | ISO-DIS 527 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 80.0 - 100 µm/m-°C @Temperature 20.0 - 100 °C |
44.4 - 55.6 µin/in-°F @Temperature 68.0 - 212 °F |
DIN 53752 |
| Specific Heat Capacity | 2.50 J/g-°C | 0.598 BTU/lb-°F | |
| Thermal Conductivity | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F | DIN 52612 |
| Melting Point | 190 °C | 374 °F | ISO R 1218 |
| Maximum Service Temperature, Air | 120 °C | 248 °F | Continuous |
| 150 °C | 302 °F | Intermittent | |
| Deflection Temperature at 0.46 MPa (66 psi) | 190 °C | 374 °F | V-notch; ISO R 75 |
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | DIN 53482 |
| Dielectric Constant | 3.5 | 3.5 | DIN 53483 |
| Dielectric Strength | 35.0 kV/mm | 889 kV/in | DIN 53481 |
| Dielectric Loss Index | 0.040 | 0.040 | DIN 53483 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Creepage/leakage Resistance | KA3b | DIN 53480 |
Users viewing this material also viewed the following:
- MV Labs W850 (NH4)2WO4 Ammonium tungstate, ortho
- Petromont 1201 High Density Polyethylene Resin
- Techmer ES Electrablend® PA6 04001 BK MB Glass/Stainless Steel Filled
- Goodfellow Nickel 55/Titanium 45 Shape Memory Alloy
- A. Schulman POLYFORT™ FPP 1244 Mineral Filled, General Purpose Polypropylene
- DSM Biomedical Elasthane™ 80A Thermoplastic Polyether Polyurethane (TPU)
- EMS-Grivory Grivory® L 20 H FR PA12 FR
- 3M Nomad™ 8150 Scraper Matting
- PlastxWorld Veroplas PA2001F Nylon 6
Copyright © lookpolymers.com All Rights Reserved