Westlake Plastics Ultra Ethylux® HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded
Manufacturer	Westlake Plastics
Trade Name	Ultra Ethylux®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Westlake Plastics Ultra Ethylux® HDPE.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Ultra Ethylux is made from high density polyethylene resin. This material is a cost effective alternative for a variety of end uses including mild chemical and wear applications. Information provided by Westlake Plastics.

Physical Properties	Metric	English	Comments
Density	0.950 g/cc	0.0343 lb/in³	ASTM D792
Water Absorption	0.030 %	0.030 %	ASTM D570; 24 hrs.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	27.6 MPa	4000 psi	ASTM D638
Elongation at Break	>= 700 %	>= 700 %	ASTM D638
Tensile Modulus	0.938 GPa	136 ksi	ASTM D638
Flexural Modulus	1.17 GPa	170 ksi	ASTM D790
Izod Impact, Notched	1.71 - 2.40 J/cm	3.20 - 4.50 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	126 - 198 µm/m-°C @Temperature 20.0 °C	70.0 - 110 µin/in-°F @Temperature 68.0 °F	ASTM D696
Melting Point	127 °C	260 °F	ASTM D4591
Maximum Service Temperature, Air	98.9 °C	210 °F	Continuous Use
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Dielectric Constant	2.3 @Frequency 1000 Hz	2.3 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	18.7 kV/mm	475 kV/in	ASTM D149

Users viewing this material also viewed the following: