- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 302 °F
Polymer Property : Maximum Service Temperature, Air = 302 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Resinlab® EP1290 Clear Mineral Filled Epoxy Adhesive Resinlab™ EP1290 Clear is a two part mineral filled epoxy adhesive designed for bonding metals and plastics. It cures at room temperature to a tough, semi-flexible material. It has good wetting to .. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Recommended |
| Nye Lubricants 374CT (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Recommended |
| Nye Lubricants 789M (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Recommended |
| Nye Lubricants 9704S Grease Information provided by Nye Lubricants. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Recommended |
| Nye Lubricants NPE-UC9 Oil Information provided by Nye Lubricants. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Maximum Operating Temperature |
| Piezo Kinetics 700 Lead Zirconate Titanate Piezoelectric This material has low dielectric constant, high QM, high shear coupling coefficient, good temperature stability and low aging characteristics. Common use of this material is in delay lines and accel.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Resinlab® EP1330LV Heat Cure Epoxy Polymer System Resinlab™ EP1330 and EP1330LV are one part heat cure epoxy polymer systems. They can also be used as a small mass potting or staking compounds, or a dam adhesive in and “dam and fill” application.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Recommended |
| Nye Lubricants 706C (IG) Synthetic Oil Information provided by Nye Lubricants. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | 5000 hours, Continuous; ASTM D3045 |
| Solvay Specialty Polymers Amodel® A-1340 HS Polyphthalamide (PPA) Resin, 40% Mineral/Glass Reinforced, Dry as Molded
&a AMODEL® A-1340 HS is a 40% mineral/glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits a high deflection temperature, high flexural modulus, high tensile strength and low warpage.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | <20000 hours; IEC 60216-P1 |
| Hexion Bakelite™ MP 4165 Melamine Phenolic Resin, Copper Adhesive, Low Shrinkage, High Mechanical Strength
(d Melamine/phenolic molding compound, inorganically filled, glass fiber reinforced, good temperature stability, high level of mechanical properties, copper adhesive, flammability UL 94/V-0/1.6 mm (not.. |
|||
| Maximum Service Temperature, Air | 150 - 280 °C | 302 - 536 °F | Average value: 219 °C Grade Count:17 |
| Overview of materials for Silicone Foam This property data is a summary of similar materials in the MatWeb database for the category "Silicone Foam". Each property range of values reported is minimum and maximum values of appropriate MatW.. |
|||
| Maximum Service Temperature, Air | >= 150 °C | >= 302 °F | E-beam cured high temperature resistance. |
| 3M Dyneon™ THV™ 200G Fluorothermoplastic, Pellet Form
(discontinued **) Data provided by the manufacturer, Dyneon LLC.This unique, melt-processable, tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) terpolymer provides a unique combination of perf.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Lehmann & Voss LUVOCOM® 1501/CF/30-1 Polysulfone, with carbon fiber Applications: Automotive industry, office machinery, medical- and precision engineering.High-strength and high-stiff parts; low coefficient of expansion.Chemical and hydrolysis resistance parts, non.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | short term |
| Lehmann & Voss LUVOCOM® 50-3019 Polycarbonate, with glass fiber and PTFE Applications: Data processing machinery, precision engineering, film and photo industry, sporting and leisure goods, medical enineering.High dimensionally stable precision parts, even at elevated te.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | short term |
| Lehmann & Voss LUVOCOM® 50-7110 Polycarbonate, with carbon fiber, low-warpage, easy flowing Applications: Data processing machinery, precision engineering, film and photo industry, sporting and leisure goods, medical enineering.Electrically conductive, suitable for continuous discharging o.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| GrafTech M3 Thin Aluminum Foil Coating Optional coating for eGRAF® SPREADERSHIELD™ graphite products. Structure: 0.127mm Al - 0.025mm PSA |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | short term; EMS |
| EMS-Grivory Grivory® 1SBVX-30H LDS black PA1010-GF30 Product Description: Grilamid 1SBVX-30H LDS black is a 30% glass fiber reinforced Polyamide 1010 injection molding grade. This grade is specifically optimized for the laser Direct Structuring techno.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | long term; EMS |
| EMS-Grivory Grivory® HTV-45H1 black 9205 PA6T/6I-GF45 Product description: Grivory HTV-45H1 black 9205 is a 45% glass fiber reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamide. Polymer designation a.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| ChevronTexaco RPM® NLGI 1 Arctic Grease Chevron RPM Arctic Grease is a premium quality grease.It is manufactured using a polyurea acetate complex thickener, special low viscosity base oil, and rust and oxidation inhibitors. It is black in.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | short term; EMS |
| EMS-Grivory Grivory® LV-15H nat PA12-GF15 Product description: Grilamid LV-15H is a 15% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following product profile: very low water absorptiongood dimension.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | short term; EMS |
| EMS-Grivory Grivory® LVX-65H SST black 9288 PA12-GF65 Product description: Grilamid LVX-65H SST black 9288 is a 65% glass fiber reinforced, heat stabilized engineering thermoplastic based on polyamide 12 for complex structural parts with the following .. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | See Note 2. |
| ChevronTexaco Threadtex® Texaco Threadtex delivers value through:High antiweld protection — Drill collars "break" easily. No galled or broken threads.Excellent lubrication in the presence of water, drilling muds, etc. Prov.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Wet Service |
| Chesterton ARC HT-S High Temperature Corrosion Resistant Coating Description: ARC HT-S is a high temperature corrosion resistant coating for continuous operating conditions at elevated temperatures. It is easily applied by brush or roller and can be sprayed with .. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | long term; EMS |
| EMS-Grivory Grivory® HT XE 4027 nat PA*-GF30 Product description: Grivory XE 4027 natural is a 30% glass-fiber reinforced flame retardant (UL 94 V-0) engineering thermoplastic material based on a semi-crystalline, partially aromatic copolyamid.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | for 50% loss of tensile strength after 5000hr |
| BASF Ultramid® KR 4365 G5 35% Glass Filled PA6/6T FR (Dry) Description: Partially aromatic polyamide; flame retardant based on red phosphorus; low water absorption, high melting point (295°C); low tendency to form deposits on electrical contacts, very resi.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Long Term |
| CENTROPLAST CENTRO HPM Polysulfone This plastic has good hydrolysis, chemical and radiation resistance, and can operate at high temperatures. It is used in food processing industry, pumps and valves, and medical equipment.Informatio.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | Service |
| 3M FM167 Indoor UL Recognized Computer Imprintable White Polyester Label Product 3M™ Indoor UL Recognized Computer Imprintable White Polyester Label Products are durable high performance materials that offer excellent thermal stability and moisture resistance. These products ar.. |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL RTI |
| Resinoid 2010 Phenolic Molding, Fabric Reinforced Data provided by the manufacturer.The Resinoid 2000 organic fiber reinforced series compounds feature mechanical strength, dimensional stability, and shock resistance |
|||
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL Temperature Index; UL 746B |
| Sumitomo Bakelite North America RX® 853G Fiberglass Reinforced Phenolic Novolac RX 853G is a fiberglass reinforced phenolic novolac compound, featuring dimensional stability, moderate impact resistance, and good strength and modulus.Information supplied by Sumitomo Bak North Am.. |
|||
Copyright © lookpolymers.com All Rights Reserved