Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polykemi AB POLYfill PP CPQ10015 FF Polypropylene, Mineral Reinforced

Category Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with 20% Talc Filler
Manufacturer Polykemi AB
Trade Name POLYfill
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Polykemi AB POLYfill PP CPQ10015 FF Polypropylene, Mineral Reinforced.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by Polykemi AB
Physical Properties Metric English Comments
Density 1.00 g/cc
0.0361 lb/in³
ISO 1183
Filler Content 15 %
15 %
±2%; Polykemi
Linear Mold Shrinkage 0.010 - 0.012 cm/cm
0.010 - 0.012 in/in
With Flow; ISO 2577
0.010 - 0.012 cm/cm
0.010 - 0.012 in/in
Across Flow; ISO 2577
Melt Index of Compound 10 g/10 min

@Load 2.16 kg,
Temperature 230 °C
 10 g/10 min

@Load 4.76 lb,
Temperature 446 °F
 ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength at Break <= 21.0 MPa
<= 3050 psi
ISO/R527
Elongation at Break 55 %
55 %
ISO/R527
Elongation at Yield 7.0 %
7.0 %
ISO/R527
Flexural Strength <= 39.0 MPa
<= 5660 psi
ISO 178
Flexural Modulus 1.90 GPa

@Temperature 23.0 °C
 276 ksi

@Temperature 73.4 °F
 ISO 178
Charpy Impact Unnotched NB

@Temperature 23.0 °C
 NB

@Temperature 73.4 °F
 ISO 179
NB

@Temperature -20.0 °C
 NB

@Temperature -4.00 °F
 ISO 179
Charpy Impact, Notched 0.500 J/cm²

@Temperature -20.0 °C
 2.38 ft-lb/in²

@Temperature -4.00 °F
 ISO 179
2.80 J/cm²

@Temperature 23.0 °C
 13.3 ft-lb/in²

@Temperature 73.4 °F
 ISO 179
Thermal Properties Metric English Comments
CTE, linear 50.0 - 70.0 µm/m-°C
27.8 - 38.9 µin/in-°F
Polykemi
Deflection Temperature at 0.46 MPa (66 psi) 124 °C
255 °F
120°C/h; ISO 75/1
Deflection Temperature at 1.8 MPa (264 psi) 67.0 °C
153 °F
120°C/h; ISO 75/1
Vicat Softening Point 60.0 °C

@Load 5.001 kg
 140 °F

@Load 11.03 lb
 50°C/h; ISO 306
140 °C

@Load 1.00 kg
 284 °F

@Load 2.21 lb
 50°C/h; ISO 306
Processing Properties Metric English Comments
Melt Temperature 230 - 250 °C
446 - 482 °F
Mold Temperature 40.0 - 60.0 °C
104 - 140 °F
Drying Temperature 70.0 - 80.0 °C
158 - 176 °F
Dry Time 2 - 4 hour
2 - 4 hour
in circulation dryer
2 - 4 hour
2 - 4 hour
in desiccant air dryer
Injection Pressure 40.0 - 70.0 MPa
5800 - 10200 psi
Back Pressure 1.00 - 1.50 MPa
145 - 218 psi
Descriptive Properties Value Comments
Holding Pressure () > 40
% of injection pressure
Injection Speed () High
Scratch Resistance, 10N (dL) 0.12
10N Fine Structure; ISO 1518/D65
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved