- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Olefinic Elastomer (TPO)
- MRC Polymers MAXTELâ„¢ 600T10-BK TPO, 10% Talc Filled
MRC Polymers MAXTELâ„¢ 600T10-BK TPO, 10% Talc Filled
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Olefinic Elastomer (TPO) |
| Manufacturer | MRC Polymers |
| Trade Name | MAXTEL™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | MRC Polymers MAXTELâ„¢ 600T10-BK TPO, 10% Talc Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
For automotive exterior applicationsExcellent process ability and dimensional stabilityCan be UV StabilizedInternal and external lubricants can be addedInformation provided by MRC Polymers Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.980 g/cc | 0.980 g/cc | ISO 1183 |
| Melt Flow | 17 g/10 min @Load 2.16 kg, Temperature 230 °C |
17 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 58 | 58 | 15sec dwell; ISO 868 |
| Tensile Strength, Yield | 16.0 MPa | 2320 psi | ISO 527 |
| Flexural Strength | 22.0 MPa | 3190 psi | ISO 178 |
| Flexural Modulus | 1.05 GPa | 152 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 47.0 kJ/m² | 22.4 ft-lb/in² | |
| Gardner Impact | 19.21 J | 14.17 ft-lb | ASTM D5420 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 55.0 °C @Thickness 3.17 mm |
131 °F @Thickness 0.125 in |
un-annealed; ISO 75 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 182 - 204 °C | 360 - 400 °F | |
| Middle Barrel Temperature | 193 - 216 °C | 380 - 420 °F | |
| Front Barrel Temperature | 204 - 227 °C | 400 - 440 °F | |
| Nozzle Temperature | 216 - 238 °C | 420 - 460 °F | |
| Melt Temperature | 221 - 243 °C | 430 - 470 °F | |
| Mold Temperature | 21.1 - 32.2 °C | 70.0 - 90.0 °F | |
| Drying Temperature | 48.9 - 65.6 °C | 120 - 150 °F | Usually not required |
| Dry Time | 1 - 2 hour | 1 - 2 hour | |
| Injection Pressure | 48.3 - 55.2 MPa | 7000 - 8000 psi | |
| Back Pressure | 0.000 - 1.03 MPa | 0.000 - 150 psi | |
| Cushion | 0.635 cm | 0.250 in |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Fill Rate | Slow to Moderate | |
| Screw Speed | Slow to Moderate |
Users viewing this material also viewed the following:
- Quadrant EPP Nylatron® GF30 Nylon Type 66, 30% Glass-Reinforced Black Color (ASTM Product Data Sheet)
- Huntsman KRYSTALFLEX® PE 900 Polyurethane Optical Aliphatic Film
- Sharadaa Ceramics VELECRETE RC 104 Rodding Castables
- SABIC Innovative Plastics LNP STAT-KON RX06001 PA 66 (Europe-Africa-Middle East)
- SABIC Innovative Plastics LNP THERMOCOMP MF741XXH PP
- Trimay® Wear Plate T170 Nickel-based Steel Overlay
- Dow Corning MOLYKOTE® 3451 CHEMICAL RESISTANT BEARING GREASE
- Dow Corning SE 4440 LP KIT
- ExxonMobil 15 Mobil EAL Arctic Series
- BCC Products BC 8990 Polyurethane Elastomer
Copyright © lookpolymers.com All Rights Reserved