- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Ether/PPO
- Polyphenylene Ether, 30% Glass Filled
- GEHR Plastics PPE-30GF Polyphenylene Ether, 30% Glass Fiber (discontinued **)
GEHR Plastics PPE-30GF Polyphenylene Ether, 30% Glass Fiber (discontinued **)
| Category | Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, 30% Glass Filled |
| Manufacturer | |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | GEHR Plastics PPE-30GF Polyphenylene Ether, 30% Glass Fiber
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The 30% glass fiber reinforced PPE has an improved dimensional stability, a very high stiffness and heat resistance that allows further uses.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.28 g/cc | 1.28 g/cc | ISO 1183 |
| Water Absorption | 0.20 % | 0.20 % | ISO 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 89 | 89 | DIN 53505 |
| Ball Indentation Hardness | 130 MPa | 18900 psi | ISO 2039 |
| Tensile Strength at Break | 100 MPa | 14500 psi | ISO 527 |
| Elongation at Break | 2.0 % | 2.0 % | ISO 527 |
| Modulus of Elasticity | 8.00 GPa | 1160 ksi | ISO 527 |
| Flexural Strength | 125 MPa | 18100 psi | 3.5%; ISO 178 |
| Charpy Impact Unnotched | 2.50 J/cm² | 11.9 ft-lb/in² | ISO 179 |
| Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 30.0 µm/m-°C @Temperature 20.0 °C |
16.7 µin/in-°F @Temperature 68.0 °F |
DIN 53752 |
| Thermal Conductivity | 0.280 W/m-K | 1.94 BTU-in/hr-ft²-°F | DIN 52612 |
| Maximum Service Temperature, Air | 110 °C | 230 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 145 °C | 293 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 140 °C | 284 °F | ISO 75 |
| Vicat Softening Point | 145 °C | 293 °F | VST/B/50; ISO 306 |
| 155 °C | 311 °F | VST/A/50; ISO 306 | |
| Minimum Service Temperature, Air | -50.0 °C | -58.0 °F | |
| Flammability, UL94 | V-1 | V-1 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | VDE 0303 |
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | VDE 0303 |
| Dielectric Constant | 2.9 @Frequency 1.00e+6 Hz |
2.9 @Frequency 1.00e+6 Hz |
DIN 53483 |
| Dielectric Strength | 18.0 kV/mm | 457 kV/in | VDE 0303 |
| Dielectric Loss Index | 0.0015 @Frequency 1.00e+6 Hz |
0.0015 @Frequency 1.00e+6 Hz |
DIN 53483 |
| Comparative Tracking Index | 250 V | 250 V | CTI; IEC 60112 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Acid Resistance | yes | |
| Aromatic Resistance | no | |
| Bondability | yes | |
| CKW Resistance | no | |
| Color | Natural | |
| Hydrocarbonate Resistance | limited | |
| Hydroxide Resistance | yes | |
| Ketone Resistance | yes | |
| Physiological indifference according | no | |
| Resistance Against Hot Water | yes | |
| UV Stabilization | limited |
Users viewing this material also viewed the following:
- SGL Carbon Group SIGRAFIL C® C30 T045 EPY Continuous Tow Carbon Fiber with 45k filaments, Epoxy Sizing
- SABIC Innovative Plastics Valox® 771 PBT (Europe-Africa-Middle East)
- Techmer ES Luriblend® POM CO TL10 Acetal
- Teknor Apex APEX® 3300-75NT Polyvinyl Chloride, Flexible
- A. Schulman POLYTROPE™ TPP 1008-01 Injection Molding Reactor Grade Olefinic Thermoplastic Elastomer
- Dow DOWLEX™ 2267A Linear Low Density Polyethylene, Blown Film Grade
- Dow Corning 5330 Fluid
- 3A Composites Core Materials AIREX® T92.100 Easy Processing Structural Foam
- Polimeri Europa Eraclene® FA 506 Hexene Copolymer High Density Polyethylene - Blown Film Extrusion
Copyright © lookpolymers.com All Rights Reserved