- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 155 °C
Polymer Property : Vicat Softening Point = 155 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 155 °C | 311 °F | B |
| Plastcom SLOVALEN PC 59 GF 30 PP, 30% glass fibre FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 30% glass fibre, contains themodifier of mechanical properties.Increased strength in comparison with unfilled PP. A.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525B |
| SABIC PP 502P Polypropylene Homopolymer for Raffia Applications Product Description: PP 502P is intended for producing low denier stretched tapes with the following features:Consistent processabilityGood processability at high line speedsLow water carry overGoo.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525B |
| SABIC PP 521P Polypropylene Homopolymer for Bi-axially Oriented Film Product Description: PP 521P is a non formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties r.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ISO 306/A50 |
| Premix Thermoplastics PRE-ELEC® PP 1396 Conductive Thermoplastic Compound PRE-ELEC® PP 1396 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-E.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics Lexan® 4401R PPC+PC (Europe-Africa-Middle East) LEXAN 4401R is a high heat resistant poly(ester)carbonate injection molding resin.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| PolyMirae Moplen HP526N IPP/WQBF Grade Polypropylene Moplen HP526N is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP526N is a homopolymer particularly suitable for WQB (Water Quench.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Lexan® HPH4404 PPC+PC (Asia Pacific) High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, gamma and e-beam steril.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate A/50; ISO 306 |
| SABIC Innovative Plastics Lexan® 3412R PC (Europe-Africa-Middle East) LEXAN 3412R is a high viscosity, 20% glass reinforced grade. It offers excellent flame retardancy and is especially designed for applications requiring high rigidity together with high heat. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Lexan® HPH4404 PPC+PC High heat specialty polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO, steam, gamma and e-beam steril.. |
|||
| Vicat Softening Point | 155 - 174 °C | 311 - 345 °F | Average value: 165 °C Grade Count:12 |
| Overview of materials for Ethylene Vinyl Alcohol (EVOH) This property data is a summary of similar materials in the MatWeb database for the category "Ethylene Vinyl Alcohol". Each property range of values reported is minimum and maximum values of appropr.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | |
| EVALCA EVAL® LC-E105A Ethylene Vinyl Alcohol Copolymer Resin
(discontinued **) 44 mol % Ethylene.Data provided by EVALCA. Applications: Cast film, melt phase forming, solid phase pressure forming, tubes, coex coating. EVOH is used in packaging applications because of its out.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | For EP-E105 |
| EVALCA EVAL® LC-E151B Ethylene Vinyl Alcohol Copolymer Resin
(discontinued **) 44 mol % Ethylene.Data provided by EVALCA. Applications: Melt phase forming, solid phase pressure forming, blow molding, tubes EVOH is used in packaging applications because of its outstanding gas.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Method A; ISO 306 |
| LyondellBasell Moplen HP550J Polypropylene Homopolymer Description: HP550J, a general purpose polypropylene homopolymer resin, is suitable for general extrusion and film fiber applications. HP550J resin meets FDA requirements in the Code of Federal Reg.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | A120; ISO 306 |
| Inno-Comp INNOPOL® CS 1-4140 BAP 40% Talc-Filled Polypropylene Homopolymer INNOPOL® CS 1-4140 B AP is a 40% talc-filled polypropylene homopolymer compound /PP-H TD40 (ISO 1043)/.INNOPOL® CS 1-4140 B AP is recommended especially for producing products, where high stif.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ISO 306/A |
| Iran Petrochemical (PCC) Moplen EP-S31HP Polypropylene Moplen EP-S31HP is a heterophasic polypropylene copolymer with an exceptional mechanical properties balance. In comparison with standard polypropylene copolymers with the same fluidity, Moplen EP-.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics NORYL V0150B PPE+HIPS (Asia Pacific) Noryl* V0150B is an unfilled, injection moldable modified polyphenylene ether resin.. Designed for high heat resistance and thin wall FR performance, this resin delivers a UL94 V0 rating at 1.5 mm a.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics NORYL V03550 PPE+HIPS (Europe-Africa-Middle East) Noryl* V03550 is a 35% milled fibre reinforced, injection moldable grade. Designed for good dimensional stability and low warpage, this resin also uses non-chlorinated, non-brominated FR additives t.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate A/50; ISO 306 |
| SABIC Innovative Plastics Xenoy® CL402 PBT+PC (Europe-Africa-Middle East) XENOY CL402 is a high viscosity, unfilled, elastomer modified PC/PBT blend for extrusion/blowmolding applications. ISO1043-label: PC+PBT-I.This data was supplied by SABIC-IP for the Europe-Africa-Mi.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| SK Chemicals SKYTHANE® S155D Polyester Based Thermoplastic Polyurethane Elastomer Description: SK Chemicals has supplied Thermoplastic Polyurethane Elastomer (TPU) under the name of SKYTHANE. Applications include:Keyboard CoversOutsoles of Soccer ShoesWire and CableAirbagsSheets .. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics NORYL GFN3 PPE+HIPS (Europe-Africa-Middle East) Noryl GFN3 is a standard 30 % glass filled material with a HDT/A of 145C according to ISO 75 |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics NORYL NH7111E PPE+HIPS Noryl* EXNL0280 is a glass fiber reinforced, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and low warpage, this resin also uses non-halogenated FR a.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics NORYL ENV150 PPE (Europe-Africa-Middle East) Noryl* ENV150 modified polyphenylene ether resin is an unfilled, flame retardant high heat grade suitable for extrusion molding conversion route. It uses non-chlorinated, non-brominated FR additives.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| SCG Chemicals EL-Proâ„¢ P401S Polypropylene Flat Yarn/Sheet Key Characteristics: Excellent mechanical propertiesRecommended Applications:Stretch tape for jumbo woven sheetMonofilament for rope and sheetInformation provided by SCG Chemicals |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| SCG Chemicals EL-Proâ„¢ P702J Polypropylene Injection Molding Key Characteristics:High clarityHigh stiffnessGood processabilityMicrowavable for cooking applicationsOdorlessSafe for food contactRecommended Applications:General purpose injection parts that requi.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| Engineered Plastics EPPC 1514G Polycarbonate Gray injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| Dow DX5E66 Polypropylene Homopolymer Resin OverviewConsistent processabilityVery high cleanlinessGood optical propertiesComplies with U.S. FDA 21 CFR 177.1520 (c)1.1a, EU-Directive 2002/72/EC, Canadian HPFB No ObjectionDX5E66 Developmental P.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| Engineered Plastics EPPC 2014B Polycarbonate Black injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation. |
|||
| Vicat Softening Point | 155 °C | 311 °F | ASTM D1525 |
| Engineered Plastics EPPC 2014G Polycarbonate Gray injection grade. Property values below represent typical values. Information provided by Engineered Plastics Corporation. |
|||
| Vicat Softening Point | 155 °C @Load 1.02 kg |
311 °F @Load 2.25 lb |
ASTM-D1525 |
| Braskem CP 202XP HECO Polypropylene Heterophasic Copolymer CP 202XP is a high melt flow rate heterophasic copolymer designed to achieve parts with high stiffness and impact strength resistance, low warpage, and excellent surface appearance. Its applications.. |
|||
| Vicat Softening Point | 155 °C | 311 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Lexan® HPH4504H PPC High heat specialty polycarbonate with enhanced autoclavability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 of USP Class VI). EtO, .. |
|||
Copyright © lookpolymers.com All Rights Reserved