Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

DuPont Performance Polymers Rynite® 940 NC010 PET  (Unverified Data**)

Category Polymer , Thermoplastic , Polyester, TP , Polyethylene Terephthalate (PET)
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF DuPont Performance Polymers Rynite® 940 NC010 PET  (Unverified Data**).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by DuPont Performance Polymers
Physical Properties Metric English Comments
Density 1.64 g/cc
0.0592 lb/in³
ISO 1183
Water Absorption 0.10 %

@Thickness 1.00 mm,
Temperature 23.0 °C
 0.10 %

@Thickness 0.0394 in,
Temperature 73.4 °F
 Equilibrium 50%RH; ISO 62, Similar to
0.75 %

@Thickness 1.00 mm,
Temperature 23.0 °C
 0.75 %

@Thickness 0.0394 in,
Temperature 73.4 °F
 Saturation, immersed; ISO 62, Similar to
Linear Mold Shrinkage, Flow 0.0020 cm/cm

@Thickness 2.00 mm
 0.0020 in/in

@Thickness 0.0787 in
 ISO 294-4
Linear Mold Shrinkage, Transverse 0.0070 cm/cm

@Thickness 2.00 mm
 0.0070 in/in

@Thickness 0.0787 in
 ISO 294-4
Melt Index of Compound 10 g/10 min

@Load 5.00 kg,
Temperature 280 °C
 10 g/10 min

@Load 11.0 lb,
Temperature 536 °F
 cm3/10 min; ISO 1133
Mechanical Properties Metric English Comments
Tensile Strength at Break 110 MPa

@Temperature 23.0 °C
 16000 psi

@Temperature 73.4 °F
 ISO 527
Elongation at Break 2.0 %

@Temperature 23.0 °C
 2.0 %

@Temperature 73.4 °F
 ISO 527
Tensile Modulus 12.0 GPa

@Temperature 23.0 °C
 1740 ksi

@Temperature 73.4 °F
 ISO 527
Charpy Impact Unnotched 3.00 J/cm²

@Temperature -30.0 °C
 14.3 ft-lb/in²

@Temperature -22.0 °F
 ISO 179/1eU
3.00 J/cm²

@Temperature 23.0 °C
 14.3 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eU
Charpy Impact, Notched 0.600 J/cm²

@Temperature -30.0 °C
 2.86 ft-lb/in²

@Temperature -22.0 °F
 ISO 179/1eA
0.700 J/cm²

@Temperature 23.0 °C
 3.33 ft-lb/in²

@Temperature 73.4 °F
 ISO 179/1eA
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 500 µm/m-°C

@Temperature 23.0 - 55.0 °C
 278 µin/in-°F

@Temperature 73.4 - 131 °F
 ISO 11359-1/-2
CTE, linear, Transverse to Flow 60.0 µm/m-°C

@Temperature 23.0 - 55.0 °C
 33.3 µin/in-°F

@Temperature 73.4 - 131 °F
 ISO 11359-1/-2
Melting Point 250 °C
482 °F
10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 240 °C
464 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 220 °C
428 °F
ISO 75-1/-2
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm

@Temperature 23.0 °C
 1.00e+15 ohm-cm

@Temperature 73.4 °F
 IEC 60093
Surface Resistance 1.00e+14 ohm

@Temperature 23.0 °C
 1.00e+14 ohm

@Temperature 73.4 °F
 IEC 60093
Dielectric Constant 3.7

@Frequency 1.00e+6 Hz,
Temperature 23.0 °C
 3.7

@Frequency 1.00e+6 Hz,
Temperature 73.4 °F
 IEC 60250
3.8

@Frequency 100 Hz,
Temperature 23.0 °C
 3.8

@Frequency 100 Hz,
Temperature 73.4 °F
 IEC 60250
Dielectric Strength 38.0 kV/mm

@Temperature 23.0 °C
 965 kV/in

@Temperature 73.4 °F
 IEC 60243-1
Dissipation Factor 0.0070

@Frequency 100 Hz,
Temperature 23.0 °C
 0.0070

@Frequency 100 Hz,
Temperature 73.4 °F
 IEC 60250
0.015

@Frequency 1.00e+6 Hz,
Temperature 23.0 °C
 0.015

@Frequency 1.00e+6 Hz,
Temperature 73.4 °F
 IEC 60250
Processing Properties Metric English Comments
Melt Temperature 285 °C
545 °F
Optimum
280 - 300 °C
536 - 572 °F
Mold Temperature >= 95.0 °C
>= 203 °F
110 °C
230 °F
optimum
Drying Temperature 120 °C
248 °F
Dry Time 4.00 hour
4.00 hour
Moisture Content <= 0.020 %
<= 0.020 %
Descriptive Properties Value Comments
Drying Recommended Yes
Generic PET
Heat Stabilized Yes
Part Marking Code >PET-(GF+MD)40<
ISO 11469
Polymer Family Polyester
Polymer Type PET
Product Category Glass/Mineral Reinforced Resins
Low Warp Resins
Region Available - Global Yes
Resin Identification PET-(GF+MD)40
ISO 1043
Ultrasonic Weldable Yes
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved