POLYMER SEARCH

Constellium PLAN 5754 Aluminum Rolled Plate

Category	Metal , Nonferrous Metal , Aluminum Alloy , 5000 Series Aluminum Alloy
Manufacturer	Constellium
Trade Name	PLAN
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Constellium PLAN 5754 Aluminum Rolled Plate.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Rolled plates in 5754 PLAN are optimized for minimum residual stress and improved dimensional tolerances. 5754 PLAN is mainly used for low stressed mechanical components, manufactured by intensive machining. Typical applications include parts for packaging machines.Information provided by manufacturer

Physical Properties	Metric	English	Comments
Density	2.67 g/cc	0.0965 lb/in³

Mechanical Properties	Metric	English	Comments
Hardness, Brinell	76 @Thickness 20.0 - 150 mm	76 @Thickness 0.787 - 5.91 in
	77 @Thickness 4.00 - 20.0 mm	77 @Thickness 0.157 - 0.787 in
Tensile Strength	190 - 240 MPa @Thickness 4.00 - 12.5 mm	27600 - 34800 psi @Thickness 0.157 - 0.492 in	Temper H111; Standard EN 485-2
	>= 255 MPa @Thickness 12.5 - 100 mm	>= 37000 psi @Thickness 0.492 - 3.94 in	Temper H111; Standard EN 485-2
	295 MPa @Thickness 4.00 - 20.0 mm	42800 psi @Thickness 0.157 - 0.787 in	Typical Strength
	295 MPa @Thickness 20.0 - 150 mm	42800 psi @Thickness 0.787 - 5.91 in	Typical Strength
Tensile Strength, Yield	>= 80.0 MPa @Strain 0.200 %, Thickness 4.00 - 12.5 mm	>= 11600 psi @Strain 0.200 %, Thickness 0.157 - 0.492 in	Temper H111; Standard EN 485-2
	>= 105 MPa @Strain 0.200 %, Thickness 12.5 - 100 mm	>= 15200 psi @Strain 0.200 %, Thickness 0.492 - 3.94 in	Temper H111; Standard EN 485-2
	140 MPa @Strain 0.200 %, Thickness 20.0 - 150 mm	20300 psi @Strain 0.200 %, Thickness 0.787 - 5.91 in	Typical Strength
	150 MPa @Strain 0.200 %, Thickness 4.00 - 20.0 mm	21800 psi @Strain 0.200 %, Thickness 0.157 - 0.787 in	Typical Strength
Elongation at Break	>= 12 % @Thickness 12.5 - 100 mm	>= 12 % @Thickness 0.492 - 3.94 in	Temper H111; Standard EN 485-2
	>= 18 % @Thickness 4.00 - 12.5 mm	>= 18 % @Thickness 0.157 - 0.492 in	Temper H111; Standard EN 485-2
	22 % @Thickness 20.0 - 150 mm	22 % @Thickness 0.787 - 5.91 in	Typical Elongation; Standard EN 485-2
	23 % @Thickness 4.00 - 20.0 mm	23 % @Thickness 0.157 - 0.787 in	Typical Elongation; Standard EN 485-2
Modulus of Elasticity	70.0 GPa	10200 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	23.8 µm/m-°C @Temperature 20.0 - 100 °C	13.2 µin/in-°F @Temperature 68.0 - 212 °F
Thermal Conductivity	130 - 140 W/m-K	902 - 972 BTU-in/hr-ft²-°F

Component Elements Properties	Metric	English	Comments
Aluminum, Al	94.35 - 97.4 %	94.35 - 97.4 %	as balance
Chromium, Cr	<= 0.30 %	<= 0.30 %
Copper, Cu	<= 0.10 %	<= 0.10 %
Iron, Fe	<= 0.40 %	<= 0.40 %
Magnesium, Mg	2.6 - 3.6 %	2.6 - 3.6 %
Manganese, Mn	<= 0.50 %	<= 0.50 %
Silicon, Si	<= 0.40 %	<= 0.40 %
Zinc, Zn	<= 0.20 %	<= 0.20 %
Zr+Ti	<= 0.15 %	<= 0.15 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	0.00000400 - 0.00000520 ohm-cm	0.00000400 - 0.00000520 ohm-cm

Users viewing this material also viewed the following: