- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Clariant Renol BR4014BK ABS, High Gloss, Black
Clariant Renol BR4014BK ABS, High Gloss, Black
| Category | Polymer , Thermoplastic , ABS Polymer |
| Manufacturer | Clariant |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Clariant Renol BR4014BK ABS, High Gloss, Black.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Clariant Masterbatches
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.05 g/cc | 1.05 g/cc | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm | 0.0050 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 41.4 MPa | 6000 psi | ASTM D638 |
| Elongation at Break | 20 % | 20 % | ASTM D638 |
| Flexural Modulus | 2.14 GPa | 310 ksi | ASTM D790 |
| Izod Impact, Notched | 1.60 J/cm @Temperature 22.8 °C |
3.00 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 87.8 °C | 190 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 82.2 °C | 180 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D149 |
| Dielectric Strength | 15.7 kV/mm | 400 kV/in | ASTM D150 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 216 - 249 °C | 420 - 480 °F | |
| Mold Temperature | 65.6 - 93.3 °C | 150 - 200 °F | |
| Injection Pressure | 4.96 - 8.27 MPa | 720 - 1200 psi | Secondary |
| 8.27 - 13.8 MPa | 1200 - 2000 psi | Initial | |
| Back Pressure | 0.345 - 1.72 MPa | 50.0 - 250 psi | |
| Shot Size | 30 - 80 % | 30 - 80 % | |
| Screw Speed | 20 - 100 rpm | 20 - 100 rpm |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PH 71 T 40 PP, 40% mineral filling
- PolyOne LubriOne™ PC-000/15T-S2 NATURAL Polycarbonate (PC)
- Plastcom SLOVAMID 66 GF 35 HTS PA66, 355% glass fibre, combined stability
- Lavergne VYPET VNT 835 PET 35% Glass-Mineral Reinforced
- Lubriplate Rock Drill Oil Specialty Oil 10R and Fluid
- SABIC Innovative Plastics Xenoy® X4820 PBT+PC (Europe-Africa-Middle East)
- DSM Akulon® N24-G6 PA6-GF30
- Entec Hypro™ PPH-GF10 Natural Homopolymer Polypropylene, 10% Glass Reinforced
- DuPont Performance Polymers Delrin® 520MP NC010 Acetal Homopolymer (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved