Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Specific Gravity = 1.05 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Specific Gravity 1.05 g/cc
1.05 g/cc
23/23°C; ASTM D792
RheTech Products T20P100-517UV 20% Talc Reinforced Polypropylene, UV Stabilized, Interior DX9 Black
Applications: Center consolesIP componentsClose out panelsInjection molding conditions reported in table.Information provided by RheTech Products.
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
SABIC Innovative Plastics Cycolac® HMG47MD ABS
General purpose, injection molding ABS for medical applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
SABIC Innovative Plastics Cycolac® MG38N ABS (Asia Pacific)
Very high impact ABS. Toughness/rigidity. Good fatigue resistance. NSF Standard 61 certified in limited colors (restrictions may apply)>
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Polymer Resources ABS-GP1 General Purpose ABS
General Purpose Acrylonitrile Butadiene StyreneFeatures: • Medium Impact ResistanceProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pig..
Specific Gravity 1.05 g/cc
1.05 g/cc
A
Reltek BONDiT™ B-482CC Adhesive and Sealant
Key PropertiesCaulking and sealing dissimilar materials for very harsh environments. Excellent adhesion to most substrates without primer. High impact resistance.ApplicationsCaulks and seals plastic..
Specific Gravity 1.05 g/cc
1.05 g/cc
Resinlab® CYNERGY CA6006 Adhesive
Description: The CYNERGY 6000 SERIES are for use in demanding applications where very fast cure speeds are required. These are single component solvent free materials manufactured in a wide variety..
Specific Gravity 1.05 g/cc
1.05 g/cc
Resinlab® CYNERGY CA6011 Adhesive
Description: The CYNERGY 6000 SERIES are for use in demanding applications where very fast cure speeds are required. These are single component solvent free materials manufactured in a wide variety..
Specific Gravity 1.05 g/cc
1.05 g/cc
Resinlab® CYNERGY CA6012 Adhesive
Description: The CYNERGY 6000 SERIES are for use in demanding applications where very fast cure speeds are required. These are single component solvent free materials manufactured in a wide variety..
Specific Gravity 1.05 g/cc
1.05 g/cc
Resinlab® CYNERGY CA6602 Adhesive
Description: The CYNERGY 6600 SERIES are modified to provide greatly reduced odor and frosting of plastics. These products are ideal for bonding dissimilar materials with excellent performance on a ..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
SABIC Innovative Plastics Cycolac® BDT5510 ABS
Automotive. High heat resistance, low gloss, color concentratable for interior applications. Natural only.
Specific Gravity 1.05 g/cc
1.05 g/cc
Alcoa KAMA 3210 Hi-Gloss Coextruded High Impact Polystyrene  (discontinued **)
CapabilitiesGauge: .007” to .060” (178 to 1524µm)Width: 12” to 62” (304 to 1575mm)Core Size: 6” standard cores, 3” and 8” availableRoll O.D.: 29” standard, up to 40” availableSilicone coat..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
LG Chemical HG193S ABS, High Flow, Chemical Resistance
Feature: Injection Molding, High Flow, Chemical ResistanceApplication: Electric & Electronic Products)CAS No. 9003-56-9Information provided by LG Chemical
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
LG Chemical XR401B ABS, High Flow, Heat Resistance
Feature: Injection Molding, High Flow, Heat ResistanceApplication: Automotives Exterior Housing (Side Mirror Housing, Garnish etc)CAS No. 25120-20-1, 9003-56-9, 25747-74-7 and 9003-54-7Information p..
Specific Gravity 1.05 - 1.07 g/cc
1.05 - 1.07 g/cc
Michelman® ThermaGloss® 426 Water based over print varnish
Description: Water based overprint varnish.Usage: ThermaGloss® 426 is a high heat resistant overprint which imparts excellent gloss to preprinted linerboard while eliminating picking and smearing..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Spartech Centrex SP-6710 Weatherable Sheet
Description: Weatherable SheetCentrex is a registered trademark of Bayer Corporation.Information provided by Spartech.
Specific Gravity 1.05 g/cc

@Temperature 22.8 °C
1.05 g/cc

@Temperature 73.0 °F
ASTM D792
Spartech DP5120 Talc Filled Homopolymer
Provides the highest level of stiffness and heat resistance of filled olefins. Talc filled grades offer the highest strength properties. Typical applications include extrusion/thermoformed food cont..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
SABIC Innovative Plastics LNP STAT-LOY AX11421 ABS
LNP* STAT-LOY* AX11421 is a compound based on ABS resin. Added feature of this material is: Antistatic.
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
A. Schulman POLYFORT™ FPP 892E Extrusion and Blow Molding Grade Homopolymer Polypropylene
DescriptionPolyfort® FPP 892E is an extrusion and blow molding grade 20% mineral-filled homopolymer polypropylene.Information provided by A. Schulman.
Specific Gravity 1.05 g/cc

@Temperature 25.0 °C
1.05 g/cc

@Temperature 77.0 °F
Dow Corning Z-6124 SILANE
Dow Corning® Z-6124 Silane has the chemical formula: (CH3O)3Si and is designated phenyltrimethoxy silane. Dow Corning Z-6124 Silane is a chemical monomer that reacts with water to form a silanetrio..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
ELASTO UK Dryflex® 650900 TPE, Improved Compression Set and High Temperature Resistance, 90A Hardness
The VTC TPE Group have developed endless formulations to fulfill different properties and application requirements to optimize the finished component. This grade is designed with improved compressi..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
ELASTO UK Dryflex® 660650S SEBS Based Material, Semi-Filled Qualities, 65A Hardness, Natural
The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
ELASTO UK Dryflex® 660800S SEBS Based Material, Semi-Filled Qualities, 80A Hardness, Natural
The 660-series is recommended when the properties of the produced detail requires the advantages of the 500-series in combination with the 600-series. A semi-filled material can therefore combine t..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Diamond Polymers Centrex® 814 General Purpose Injection Molding Grade
Centrex 814 resin is a high-gloss, high-impact grade of ASA (acrylonitrile-styrene-acrylate). It is an injection molding grade with a good balance of physical properties, gloss and processing perfor..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Diamond Polymers Centrex® 835 Sheet Extrusion Grade
Centrex 835 resin is a low-gloss grade of ASA (acrylonitrile-styrene-acrylate) with good resistance to weather aging. It has good melt strength for extrusion and thermoforming applications. Centrex ..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Clariant Renol ABS3460 ABS, General Purpose, Low Gloss
Data provided by Clariant Masterbatches
Specific Gravity 1.05 g/cc
1.05 g/cc
Abatron Acrylic 57-1™ Clear, Water-Based Coating
Acrylic 57-1™ is a high-gloss, non-yellowing acrylic coating. It forms a very clear film with exceptional mar resistance. Because it will not yellow and is stain resistant, it is an excellent choic..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
A. Schulman POLYFORT™ FPP 1245U CaCO3 Filled UV Stable Copolymer Polypropylene
DescriptionPolyfort® FPP 1245U is a 20% CAC03 filled UV stable copolymer polypropylene product. Information provided by A. Schulman.
Specific Gravity 1.05 g/cc
1.05 g/cc
Mixed; TM R050-16
Resinlab® EP1046FG Clear Electronic Grade Epoxy Encapsulant
Resinlab™ EP1046FG Clear is a two part unfilled very fast curing electronic grade epoxy encapsulant designed for small castings (less than 25 grams). It cures very quickly with low exotherm to a to..
Specific Gravity 1.05 g/cc
1.05 g/cc
ASTM D792
Samsung Cheil Industries Infino® WP-1041G PC/ABS, Unreinforced Metal Plating Grade
Information provided by Samsung Cheil Industries.
Copyright © lookpolymers.com All Rights Reserved