- HOME
- POLYMER SEARCH
- Polymer Property : Flexural Modulus = 247 ksi
Polymer Property : Flexural Modulus = 247 ksi Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Modulus | 1.70 GPa | 247 ksi | Tangent; ASTM D 790 |
| NOVA Chemicals Novapol® HE-W959-A HDPE Extrusion/Blow Molding Resin HE-W959-A complies with the U.S. FDA specifications for olefin polymers and may be used in the U.S. as an article or component of an article intended for use in contact with food. It is also biolog.. |
|||
| Flexural Modulus | 1.70 GPa @Temperature 23.0 °C |
247 ksi @Temperature 73.4 °F |
ISO 178 |
| Polykemi AB POLYfill PP EIP16020 F PP Mineral Reinforced, Extrusion Grade, Low CLTE Information provided by Polykemi AB |
|||
| Flexural Modulus | 1.70 GPa @Temperature 23.0 °C |
247 ksi @Temperature 73.4 °F |
ISO 178 |
| Polykemi AB POLYfill PP HJ752 UV Polypropylene/Elastomer, Mineral Reinforced Information provided by Polykemi AB |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 1% secant; ASTM D790A |
| Reliance Industries Repol H035SG Polypropylene REPOL Polypropylene H035SG is being manufactured using Unipol PP process, which combines the production efficiency of gas phase fluidized bed reactor with the high activity stereospecific catalyst s.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| Inno-Comp INNOPOL® CS 2-2523 EP 16% Talc Filled, Elastomer Modified Polypropylene Copolymer INNOPOL® CS 2-2523 EP is a 16% talc-filled, elastomer modified compound based on polypropylene block-copolymer. This grade is available in natural and custom colored form.INNOPOL® CS 2-2523 EP.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| Grupo Repol Dinalon® A1S25 MI PA66 Medium Impact Mechanical properties for Dry As Molded samplesInformation provided by Grupo Repol |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ASTM D790 |
| Ineos ABS Triax® 1220 S ABS + Polyamide Blend, Extrusion, Conditioned Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | Tangent at 0.05 in/min; ASTM D790A |
| LyondellBasell Astryn 75F4-2 Polypropylene Copolymer, 20% Talc Key Features: conventional melt flow, medium high modulus, mineral-filled polypropylene copolymer, excellent impact and stiffness balance, good colorability, good aestheticsApplications: small appli.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| SABIC Innovative Plastics Noryl RF1132 PPE+PP PPE+PP blend for high frequency applications. Good heat resistance and low DK.This data was supplied by SABIC-IP for the Americas region. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | |
| Spartech Royalstatâ„¢ R671 ABS Static Control Sheet Data provided by the manufacturer. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| SABIC Innovative Plastics XYLEX HX8300HP PC+POLYESTER (Europe-Africa-Middle East) Medium flow, Transparent PC/Polyester alloy. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant... |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ASTM D790 |
| Styrolution Styrolux® 684 D SBC Description: Styrolux® 684 D is a clear styrene-butadiene copolymer (SBC) used in injection molding for parts with enhanced toughness as well as in sheet and film extrusion and blow molding. Part.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| SABIC Innovative Plastics LNP THERMOCOMP V1000SU PA LNP* Thermotuf* V1000SU is a compound based on Nylon resin. Added features of this material include: Heat Stabilized, UV Stabilized. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| SABIC Innovative Plastics LNP THERMOTUF V1000 PA 66 LNP THERMOTUF* V1000 is a compound based on Nylon resin. Added features of this material include: High Impact. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| SABIC Innovative Plastics LNP Thermocomp MK001AS PP (Europe-Africa-Middle East) LNP* THERMOCOMP* MK001AS is a compound based on Polypropylene resin containing Mineral. Added features include: Heat Stabilized.This data was supplied by SABIC-IP for the Europe-Africa-Middle East r.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ASTM D 790 |
| Saint-Gobain Meldin® 1380 Thermoplastic Bearing Material Specify Meldin 1380 for use with soft mating surfaces that gall easily, such as stainless steel or aluminum. Meldin 1380 also complies with the FDA Title 21 CFR regulations for contact with article.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| SABIC Innovative Plastics NORYL ENV105 PPE+HIPS (Europe-Africa-Middle East) NORYL ENV105 is an impact modified extrusion grade with a Vicat B/120 of 115C according ISO 306. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | Tangent; ISO 178 |
| A. Schulman FORMION™ FI 232H 10% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 232H is an injection molding grade, 10% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, high stiffness and exceptional impact.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | Tangent; ISO 178 |
| A. Schulman FORMION™ FI 232H 10% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 232H is an injection molding grade, 10% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, high stiffness and exceptional impact.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | Tangent; ISO 178 |
| A. Schulman FORMION™ FI 232H 10% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 232H is an injection molding grade, 10% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, high stiffness and exceptional impact.. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ASTM D790 |
| Cresset Powers Cress-Alon™ A3000 3.0 r.v. Film or Extrusion Grade Nylon 6, 50% RH Neat resin, for film or extrusion.Information provided by Cresset Powers Ltd. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| DuPont Performance Polymers Delrin® 100T NC010 Acetal (POM)
(Unverified Data**) Toughened High Viscosity Acetal Homopolymer Delrin 100T NC010 is a toughened high viscosity acetal homopolymer grade with high impact resistance.Information provided by DuPont Performance Polymers |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | tangent; chs 0.05 in/min; ASTM D790 |
| Diamond Polymers Centrex® 825 Sheet Extrusion Grade Centrex 825 resin is a high-gloss, high-impact grade of ASA (acrylonitrile-styrene-acrylate) with good resistance to weather aging. It has good melt strength for extrusion and thermoforming, and it .. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| Eurostar Starpylen MK001AS PP, Mineral Filled, Injection Molding Starpylen MK001AS is a Mineral Filled Polypropylene Injection Molding ResinInformation provided by Eurostar. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| Chi Mei Polylac® PA-746H ABS - High Flow Super high flow, medium impact |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ASTM D790 |
| Ashley Polymers Ashlene® 525-B2 Nylon 66 A high impact modified lubricated nylon resin containing well dispersed carbon black for maximum resistance to weathering.Data provided by the manufacturer |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| SABIC Innovative Plastics LNP THERMOTUF V1000 PA 66 (Asia Pacific) LNP THERMOTUF* V1000 is a compound based on Nylon resin. Added features of this material include: High Impact. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| SABIC Innovative Plastics LNP Thermotuf V1000SU PA LNP* Thermotuf* V1000SU is a compound based on Nylon resin. Added features of this material include: Heat Stabilized, UV Stabilized.This data was supplied by SABIC-IP for the Americas region. |
|||
| Flexural Modulus | 1.70 GPa | 247 ksi | 2 mm/min; ISO 178 |
| SABIC Innovative Plastics XYLEX X8300CL PC+POLYESTER (Europe-Africa-Middle East) PC+Polyester, UV Stabilized, Transparent, OQ Quality |
|||
Copyright © lookpolymers.com All Rights Reserved