Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Flexural Strength | 50.0 MPa | 7250 psi | |
Plastcom SLOVALEN PC 71 T 10 PP, 10% mineral filling FeaturesModified copolymer PP for injection moulding with the content of 10% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decr eased shri.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
PolyOne Maxxam™ JN-818.S001-1000 Polypropylene Homopolymer (PP Homopolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car.. |
|||
Flexural Strength | 50.0 - 100 MPa | 7250 - 14500 psi | 1.5mm/min; ISO 178:2001 |
Nylacast Aquanyl Nylon 612 Copolymer Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability a.. |
|||
Flexural Strength | <= 50.0 MPa | <= 7250 psi | ISO 178 |
Polykemi AB POLYfill PPH T2020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Nilit FRIANYL A63 TF10 Nylon 6.6 for injection molding, 10% PTFE lubricated Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Transverse |
Quadrant Plastic Composites MultiQ® Impact Thermoplastic Panel Composite MultiQ is a product line of thermoplastic composites in panel form whose specific properties make them particularly suitable as an environmental alternative to plywood in outdoor applications. Howev.. |
|||
Flexural Strength | 50.0 MPa @Temperature 121 °C |
7250 psi @Temperature 250 °F |
ASTM D790 |
Penn Fibre Pennite® 4512 Nylon 6, 12% Glass Fiber Reinforced (PA6) PENNITE® 4512 is a 12% glass fiber reinforced, black pigmented, thermally modified, type 6 nylon, available in sheets and rolls for high performance thermoforming and fabrication applications. PENN.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | |
Lehmann & Voss LUVOCOM® 1850-7692/BK PBT, with glass spheres and PTFE Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.Isotropic shrinkage characteri.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | 2 mm/min, @ 3.5% strain; ISO 178 |
Ineos ABS Triax® 3158 ABS + Polyamide Blend (DAM), PA66/ABS Pellets (filled) Triax® 3158 is a PA+ABS-Blend and on-line paintable (195°C). It has very high heat resistance, reduced moisture, improved impact strength, and a low coefficient of linear thermal expansion. It.. |
|||
Flexural Strength | 50.0 - 70.0 MPa | 7250 - 10200 psi | |
GrafTech GRAFCELL® FFP-100 SERIES Flow Field Plate Graphite Manufactured from expanded natural graphite, GRAFCELL® Flow Field Plate (FFP) components retain a continuous graphitic phase. This phase continuity, combined with a low contact resistance, provid.. |
|||
Flexural Strength | <= 50.0 MPa | <= 7250 psi | DIN 54352 |
Schwartz Technical Plastics LAMIGAMID® 400 Cast Polyamide 6, Elastomer Modified, Dry Application: gear-wheels, chain-wheels, hydrocyclones, housings, outrigger floatsInformation provided by Schwartz Technical Plastics GmbH |
|||
Flexural Strength | 50.0 MPa | 7250 psi | |
SPS Guang Zhou FILLMAâ„¢ 5002F30A Mineral Filled Polypropylene Characteristic: 30%wt of French chalk filled, high rigidity, high heat resistanceApplications: Household appliance partsInformation Provided by SPS (Guang Zhou) Ltd. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | 1.3 mm/min, 50 mm span; ASTM D 790 |
SABIC Innovative Plastics LNP Stat-loy AX06484X ABS LNP* Stat-Loy* AX06484 is a compound based on ABS resin containing mineral filler. Characteristics of this grade is it is extrudeable and static dissipative.This data was supplied by SABIC-IP for t.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | Bending Strength |
Saint-Gobain Vitreosil® Clear Fused Quartz Tubing Electrically fused quartz is recognized for its combination of purity, chemical inertness, physical stability, thermal shock resistance, high electrical resistivity, and high operating temperatures... |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Styrolution PS 156F GPPS Styrolution PS 156F is a general purpose polystyrene grade with excellent flow properties, high heat resistance and is zinc stearate free.Free of internal lubricantsHigh heat resistanceExcellent flo.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
A. Schulman POLYFLAM™ RABS 930-01 Information provided by A. Schulman. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
A. Schulman POLYFORT™ FPP 1237 CaCO3 filled homopolymer polypropylene DescriptionPolyfort® FPP 1237 is a 20% CAC03 filled homopolymer polypropylene product. Information provided by A. Schulman. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Polyram RamOfin PPH313V4 Polypropylene, 20% Mineral Filled 20% mineral filled, impact modified polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | DIN EN ISO 178 |
Wolf Kunststoff ZEDEX® ZX-530CD3 031 Polymer Alloy, Fiber Reinforced and PTFE Modified Main Characteristics: Dimensionally stable and rigid; Stress resistant; Extremely low wear to 100 ° CApplications: Chemical Engineering; Laboratory Technology; Automitve Technology; Machine ToolsIn.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
A. Schulman POLYFLAM™ RABS 930-01 Information provided by A. Schulman. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Polyram RamOfin PPH343T8 Polypropylene, 40% Mineral Filled 40% Mineral filled polypropylene for injection molding applications.Information provided by Polyram. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM-D790 |
Polyram RamTal PM8515 Acetal, High impact High impact polyacetal for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | cond; ISO 178 |
DSM Novamid® 3010SR NAT PA66 Easy Molding Grade |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO 178 |
Eurostar Staramide R1000IX4 PA66, Impact Modified, Injection Molded Staramide R1000IX4 is an Impact Modified Polyamide 66 Injection Molding Resin (also known as R1000HI020 Star X 1020)Information provided by Eurostar. |
|||
Flexural Strength | 50.0 - 100 MPa | 7250 - 14500 psi | |
Alliance BIF-11 Bonded (Composite) Magnetic Material |
|||
Flexural Strength | 50.0 - 100 MPa | 7250 - 14500 psi | |
Alliance BIF-2 Bonded (Composite) Magnetic Material |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ISO Data |
BASF Ultramid® 8350 HS PA6 (Dry) Ultramid 8350 HS is a heat stabilized, impact modified type 6 graft copolymer developed for extrusion, tubing, and jacketing applications requiring a high level of toughness combined with a moderate.. |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Aclo Accutech Polypropylene Homopolymer HP0339M40CL Mica Reinforced Coupled |
|||
Flexural Strength | 50.0 MPa | 7250 psi | ASTM D790 |
Ineos Nova Zyntar® 702 High Performance Flame Retardant Polystyrene
(discontinued **) Custom ColorsApplications: Injection molding, Gas-assist injection moldingThis is an impact grade of polystyrene containing chemicals to increase resistance to ignition in laboratory flame tests. L.. |